Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 815-705-6 | CAS number: 17360-11-1
Partition coefficient
Administrative data
Link to relevant study record(s)
- Endpoint:
- partition coefficient
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 117 (Partition Coefficient (n-octanol / water), HPLC Method)
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.8 (Partition Coefficient - HPLC Method)
- GLP compliance:
- no
- Type of method:
- HPLC method
- Partition coefficient type:
- octanol-water
- Analytical method:
- high-performance liquid chromatography
- Key result
- Type:
- log Pow
- Partition coefficient:
- < 0.3
- Temp.:
- 25 °C
- pH:
- ca. 7
- Conclusions:
- The log POW of L-Tyrosine, 3,5-dinitro- (wet product) is stated as < 0.3.
- Executive summary:
The study was performed using a HPLC with a C18 column. Seven reference items with different retention times and thiourea for the determination of the dead time were used to produce a calibration curve, since retention time on hydrophobic columns and POWare correlated. The reference items were chosen based on the results of the pre-test.
One vial was filled with the reference item mix and one vial with the test item solution. The vials were analysed using the HPLC with the program described below. First one injection from the solvent blank methanol / water 65 % / 35 % (v/v) was made. Then three injections were measured from the reference item mix, three injections from the test item and again three injections from the reference item mix.
For each reference item, the capacity factor k was calculated from the retention time of thiourea and the retention time of the respective reference item.A calibration function (log k versus log POW, linear fit) was determined using the literature values for POWof the reference items and the retention times in the six determinations.
The chromatogram of the test item L-Tyrosine, 3,5-dinitro- (wet product) gave one peak with a retention time of 1.152 min (mean). The log POWof the peak was not calculable, because the retention time lay below the retention time of thiourea (1.453 min mean).
Therefore, the corresponding log POW of L-Tyrosine, 3,5-dinitro- (wet product) is stated as < 0.3.
Reference
Description of key information
The log POW of L-Tyrosine, 3,5-dinitro- (wet product) is stated as < 0.3.
Key value for chemical safety assessment
- Log Kow (Log Pow):
- 0.3
- at the temperature of:
- 25 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
