Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2014
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- no
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: MG-12/2014 - Test procedure:
- burning time over 250 mm for metal powders or metal alloys
- Burning time:
- 2 min
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- FAT 40069/D should be considered as not highly flammable.
- Executive summary:
A study was performed to determine the flammability of FAT 40069/D according to EU Method A.10 (Flammability (Solids).
Safety Pre-Test:
A small amount of the test item was heated on a magnesia groove with a gas burner. Glowing was observed. The test item showed no signs of ignition.
Preliminary screening test:
The test item was heated with the flame of a teclu burner. Glowing was observed during heating. No ignition occurred within two minutes.
No ignition was observed throughout the course of the test. Hence, the test item FAT 40069/D should be considered as not highly flammable.
Reference
Safety Pre-Test
A small amount of the test item was heated on a magnesia groove with a gas burner. Glowing was observed. The test item showed no signs of ignition.
Preliminary screening test
The test item was heated with the flame of a teclu burner. Glowing was observed during heating. No ignition occurred within two minutes.
Description of key information
A study was performed according to EU Method A.10 (Flammability (Solids). No ignition was observed throughout the course of the test. Hence, the test item FAT 40069/D should be considered as not highly flammable.
Key value for chemical safety assessment
- Flammability:
- non flammable
Additional information
Justification for classification or non-classification
No ignition was observed throughout the course of the test. Hence, FAT 40069/D should be considered as not highly flammable and no classification is required as per the Regulation (EC) No. 1272/2008.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
