Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-691-5 | CAS number: 473799-16-5
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Inhalation: Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.Get medical attention if adverse health effects persist or are severe . If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway.
Loosen tight clothing such as a collar, tie, belt or waistband.
Ingestion: Wash out mouth with water. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention. Never giveanything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact
Wash skin immediately with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse.
Clean shoes thoroughly before reuse.
Eye contact
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses.
Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs..
Loosen tight clothing such as a collar, tie, belt or waistband.
Ingestion: Wash out mouth with water. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention. Never giveanything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact
Wash skin immediately with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse.
Clean shoes thoroughly before reuse.
Eye contact
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses.
Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs..
Fire-fighting measures
Suitable extinguishing media: Use dry chemical powder.
Unsuitable extinguishing media: Do not use water jet.
Special exposure hazards: No specific fire or explosion hazard when used as directed. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
Hazardous combustion products: No specific data
Special protective equipment for fire-fighters
Fire-fighters should wear appropriate protective equipment and selfcontained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Unsuitable extinguishing media: Do not use water jet.
Special exposure hazards: No specific fire or explosion hazard when used as directed. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
Hazardous combustion products: No specific data
Special protective equipment for fire-fighters
Fire-fighters should wear appropriate protective equipment and selfcontained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Accidental release measures
Personal precautions : No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing dust.
Provide adequate ventilation. Put on appropriate personal protective
equipment.
Environmental precautions
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution /sewers, waterways, soil or air).
Large spill :
Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container. Avoid creating dusty conditions and prevent wind dispersal. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Small spill :
Move containers from spill area. Vacuum or sweep up material and place in a designated, labelled waste container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Provide adequate ventilation. Put on appropriate personal protective
equipment.
Environmental precautions
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution /sewers, waterways, soil or air).
Large spill :
Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container. Avoid creating dusty conditions and prevent wind dispersal. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Small spill :
Move containers from spill area. Vacuum or sweep up material and place in a designated, labelled waste container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Handling and storage
Manufacture and use of this chemical intermediate takes place under strictly controlled conditions, as described in Art. 17/18 REACH. The substance is rigorously contained during manufacturing and use and appropriate risk management measures including PPE (i.g. during charging or sampling) are applied. Occupational exposure is reduced to a minimum and well controlled by measurements. A management system covering all general aspects of a chemical production is in place, especially cleaning and maintenance of plants and equipment. An authorisation scheme based on instructions covering the whole process ensures that only trained and authorised staff handles the substance.
Handling: Put on appropriate personal protective equipment. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not breathe dust. Do not
ingest. Avoid contact with eyes, skin or clothing. Avoid the creation of dust when handling and avoid all possible sources if ignition (spark or flame). Prevent dust accumulation. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Avoid release to the environment. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Electrical equipment and lighting shloud be protected to appropriate standards to prevent dust coming into contact with hot surfaces, sparks or other ingnition sources. Empty containers retain product residue and can be hazardous.
Storage:
Store in accordance with local regulations. Store in segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use
appropriate containment to avoid environmental contamination.
Handling: Put on appropriate personal protective equipment. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not breathe dust. Do not
ingest. Avoid contact with eyes, skin or clothing. Avoid the creation of dust when handling and avoid all possible sources if ignition (spark or flame). Prevent dust accumulation. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Avoid release to the environment. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Electrical equipment and lighting shloud be protected to appropriate standards to prevent dust coming into contact with hot surfaces, sparks or other ingnition sources. Empty containers retain product residue and can be hazardous.
Storage:
Store in accordance with local regulations. Store in segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use
appropriate containment to avoid environmental contamination.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- --
Shipping information
- Proper shipping name and description:
- --
- Chemical name:
- --
- Labels:
- --
Special provisions / remarks
- Special provisions:
- Not regulated
- Remarks:
- Not dangerous cargo. Keep dry. Keep away from cargo suspectible to odour. Keep away from foodstuffs, acids and alkalis.
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- --
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Special precautions for user/Additional info: Not regulated.
Not dangerous cargo. Keep dry. Keep away from cargo suspectible to odour. Keep away from foodstuffs, acids and alkalis.
Marine transport (UN RTDG/IMDG)
- UN number:
- --
Shipping information
- Proper shipping name and description:
- --
- Chemical name:
- --
- Labels:
- --
Special provisions / remarks
- Remarks:
- Special precautions for user/Additional info: Not regulated.
Not dangerous cargo. Keep dry. Keep away from cargo suspectible to odour. Keep away from foodstuffs, acids and alkalis.
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- --
Shipping information
- Proper shipping name and description:
- --
- Chemical name:
- --
- Labels:
- --
Special provisions / remarks
- Remarks:
- Special precautions for user/Additional info: Not regulated.
Not dangerous cargo. Keep dry. Keep away from cargo suspectible to odour. Keep away from foodstuffs, acids and alkalis.
Additional transport information
Additional information
- Special provisions / remarks / other:
- The producer uses packaging for the product, which meets the requirements for products with a hazard potential as far as
tightness and stability are concerned. Consequently transport is possible without increased danger as long as attention is paid to the usual
measures such as stack height, protection against falling and correct labelling. In case of partially fractured containers, these must be kept closed carefully on any transport, in order to prevent spillage.
Exposure controls / personal protection
Exposure limit values: Not available
Recommended monitoring procedures:
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective
equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to
chemical agents and national guidance documents for methods for the determination of hazardous substances.
Risk management measures/Occupational exposure controls
Technical measures: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits. Use explosion-proof ventilation equipment. The substance shall be rigorously contained by technical means during its whole lifecycle including manufacture, pruification, cleaning and maintenance of equipment, sampling, analysis, loading and unloading of equipment or vessels, waste disposal or prufication and storage. Procedural and control technologies shall be used that minimise emission and any resulting exposure. In cases of accident and where waste is generated, procedural and/or control technologies shall be used to minimise emissions and the resulting exposure during purification or cleaning and maintenance. Only properly trained and authorised personnel shall handle the substance. In case of cleaning and maintenance works, special procedures such as purging ans washing shall be applied before the system is opened and entered. Product-handling procedures shall be well documented.
Personal protection measures:
Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with
an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Hand protection: Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. After contamination with product change the gloves immediately and
dispose of them according to relevant national and local regulations.
Eye protection: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts.
If operating conditions cause high dust concentrations to be produced, use dust goggles.
Skin protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved and
should be approved by a specialist before handling this product.
Recommended: Wear protective clothing.
Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory
and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
Environmental exposure controls: Emissions from ventilation or work process equipment should be checked to ensure they comply with the
requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Recommended monitoring procedures:
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective
equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to
chemical agents and national guidance documents for methods for the determination of hazardous substances.
Risk management measures/Occupational exposure controls
Technical measures: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits. Use explosion-proof ventilation equipment. The substance shall be rigorously contained by technical means during its whole lifecycle including manufacture, pruification, cleaning and maintenance of equipment, sampling, analysis, loading and unloading of equipment or vessels, waste disposal or prufication and storage. Procedural and control technologies shall be used that minimise emission and any resulting exposure. In cases of accident and where waste is generated, procedural and/or control technologies shall be used to minimise emissions and the resulting exposure during purification or cleaning and maintenance. Only properly trained and authorised personnel shall handle the substance. In case of cleaning and maintenance works, special procedures such as purging ans washing shall be applied before the system is opened and entered. Product-handling procedures shall be well documented.
Personal protection measures:
Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with
an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Hand protection: Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. After contamination with product change the gloves immediately and
dispose of them according to relevant national and local regulations.
Eye protection: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts.
If operating conditions cause high dust concentrations to be produced, use dust goggles.
Skin protection: Personal protective equipment for the body should be selected based on the task being performed and the risks involved and
should be approved by a specialist before handling this product.
Recommended: Wear protective clothing.
Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory
and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
Environmental exposure controls: Emissions from ventilation or work process equipment should be checked to ensure they comply with the
requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Stability and reactivity
Stability: The product is stable
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid: Avoid the creation of dust when handling and avoid all possible sources of ignition (spark or flame). Prevent dust accumulation. In case of dusty organic products the possibility of a dust explosion should always be considered. No hazardous reactions when used as directed.
Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid: Avoid the creation of dust when handling and avoid all possible sources of ignition (spark or flame). Prevent dust accumulation. In case of dusty organic products the possibility of a dust explosion should always be considered. No hazardous reactions when used as directed.
Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Disposal considerations
Product
Methods of disposal: Examine possibilities for re-utilisation. Product residues and uncleaned empty containers should be packaged, sealed,
labelled, and disposed of or recycled according to relevant national and local regulations. Where large quantities are concerned, consult the
supplier. When uncleaned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues.
For disposal within the EC, the appropriate code according to the European Waste List (EWL) should be used.
It is among the tasks of the polluter to assign the waste to waste codes specific to industrial sectors and processes according to the European
Waste List (EWL).
Hazardous waste: The classification of the product may meet the criteria for a hazardous waste.
Packaging
Methods of disposal: The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible.
Special precautions: This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilt material and runoff and contact
with soil, waterways, drains and sewers.
Methods of disposal: Examine possibilities for re-utilisation. Product residues and uncleaned empty containers should be packaged, sealed,
labelled, and disposed of or recycled according to relevant national and local regulations. Where large quantities are concerned, consult the
supplier. When uncleaned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues.
For disposal within the EC, the appropriate code according to the European Waste List (EWL) should be used.
It is among the tasks of the polluter to assign the waste to waste codes specific to industrial sectors and processes according to the European
Waste List (EWL).
Hazardous waste: The classification of the product may meet the criteria for a hazardous waste.
Packaging
Methods of disposal: The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible.
Special precautions: This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilt material and runoff and contact
with soil, waterways, drains and sewers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
