Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
. General information
.. Personal protection for the First Aider.
.. Instantly remove any clothing soiled by the product.

. After inhalation
.. In case of unconsciousness bring patient into stable side position for transport.
.. Supply fresh air; consult doctor in case of symptoms.

. After skin contact
.. Wash with polyethylene glycol and ethanol (2:1). Then wash thoroughly with water and soap.
.. Seek medical treatment.

. After eye contact
.. Rinse opened eye for several minutes under running water.
.. Seek medical treatment.

. After swallowing
.. Rinse out mouth and then drink plenty of water.
.. In case of persistent symptoms consult doctor.


Most important symptoms and effects, both acute and delayed
.. No further relevant information available.

Information for doctor
.. Therapeutically measures: basic help, decontamination, symptomatic treatment.


Indication of any immediate medical attention and special treatment needed
.. No further relevant information available.
*

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents
.. CO2, extinguishing powder or water jet. Fight larger fires with water jet.

. For safety reasons unsuitable extinguishing agents
.. Water with a full water jet.


Special hazards arising from the substance or mixture
.. Can be released in case of fire
.. Carbon monoxide (CO)


Advice for firefighters
. Protective equipment:
.. Do not inhale explosion gases or combustion gases.
.. Wear self-contained breathing apparatus.
*

Accidental release measures

Personal precautions, protective equipment and emergency procedures
.. Wear minimum protective clothing (see Section 8 (Exposure controls/personal protection) for information on personal protection equipment).
.. Use breathing protection against the effects of fumes / aerosol.


Environmental precautions:
.. Do not allow product to reach sewage system or water bodies.


Methods and material for containment and cleaning up:
.. Send for recovery or disposal in suitable containers.
.. Dispose of contaminated material as waste according to Section 13 (Disposal considerations) for information on disposal.


Reference to other sections
.. See Section 7 (Handling and storage) for information on safe handling
.. See Section 8 (Exposure controls/personal protection) for information on personal protection equipment.
.. See Section 13 (Disposal considerations) for information on disposal.
*

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant’s intermediate.


Precautions for safe handling
.. Precautions against electrostatic charging.
.. Keep PEG 300 / Ethanol or PEG 400 solution ready

. Information about protection against explosions and fires:
.. Keep ignition sources away - Do not smoke.
.. Keep breathing equipment ready.


Conditions for safe storage, including any incompatibilities
. Storage
. Requirements to be met by storerooms and containers:
.. Prevent any penetration into the ground.

. Further information about storage conditions:
..Keep container tightly sealed.


Specific end use(s)
.. No further relevant information available.
*

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant’s intermediate.


Exposure controls
. Personal protective equipment
. General protective and hygienic measures
.. The usual precautionary measures should be adhered to general rules for handling chemicals.
.. Keep away from foodstuffs, beverages and food.
.. Take off immediately all contaminated clothing
.. Wash hands during breaks and at the end of the work.
.. Store protective clothing separately.

. Breathing equipment:
.. In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
.. Filter A (EN 371).
.. Filter ABEK

. Protection of hands:
.. Only use chemical-protective gloves with CE-labelling of category III (EN 374).

. Material of gloves
.. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

. Penetration time of glove material
.. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

. For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable:
.. Nitrilkautschuk
.. Butylkautschuk
.. e.g. glove of Fa. KCL, www.KCL.de (sitemap): Camatril (Art.-no. 731, 730, Level 6, >480min), Butoject (Art.-no.: 898, Level 6, >480min)

. As protection from splashes gloves made of the following materials are suitable:
.. Nitril rubber,NBR
.. e.g. oneway gloves fa. KCl www.KCL.de(sitemap): Dermatril (Art.-No. 740)

. Eye protection:
.. Tightly sealed safety glasses.
.. Gauze goggles

. Body protection:
.. Use protective suit.
*

Stability and reactivity

Chemical stability
. Thermal decomposition / conditions to be avoided:
.. No decomposition.


Possibility of hazardous reactions
.. No dangerous reactions known


Conditions to avoid
.. No further relevant information available.


Incompatible materials:
.. No further relevant information available.


Hazardous decomposition products:
.. No dangerous decomposition products known
*

Disposal considerations

Waste treatment methods
. Recommendation
.. Remove according to local authority recommendations, e.g. convey to a suitable incinerator.

. European waste catalogue
.. The waste code classification is to be carried out according to the European Waste Catalogue (EWC) specifically for each branch of industry and each type of process.

. Uncleaned packagings:
. Recommendation:
.. Disposal must be made according to official regulations.
*