Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 932-728-8 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
General information
- Personal protection for the First Aider.
- Take affected persons out of danger area and instruct to lie down.
- Instantly remove any clothing soiled by the product.
After inhalation
- Supply fresh air.
- In case of unconsciousness bring patient into stable side position for transport.
- Call a doctor immediately.
After skin contact
- Wash with polyethylene glycol and ethanol (2:1). Then wash thoroughly with water and soap.
- Call a doctor immediately.
After eye contact
- Rinse opened eye for several minutes under running water.
- Call a doctor immediately.
After swallowing
- Rinse out mouth and then drink plenty of water.
- Do not induce vomiting; instantly call for medical help.
Most important symptoms and effects, both acute and delayed
- No further relevant information available.
Information for doctor
- Therapeutically measures: basic help, decontamination, symptomatic treatment.
Indication of any immediate medical attention and special treatment needed
- No further relevant information available.
-
Fire-fighting measures
Extinguishing media
Suitable extinguishing agents
- The product is not flammable
Special hazards arising from the substance or mixture
- Formation of toxic gases is possible during heating or in case of fire:
Phenol
Advice for firefighters
Protective equipment:
- Do not inhale explosion gases or combustion gases.
- Wear self-contained breathing apparatus.
-
Accidental release measures
Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
- Do not allow to enter drainage system, surface or ground water.
Methods and material for containment and cleaning up:
- Ensure adequate ventilation.
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders).
- Send for recovery or disposal in suitable containers.
Reference to other sections
- See Section "Handling and storage" for information on safe handling
- See Section "Exposure controls/personal protection" for information on personal protection equipment.
- See Section "Disposal considerations" for information on disposal.
-
Handling and storage
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 18(4) for transported isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant’s intermediate.
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
- Keep PEG 300 / Ethanol or PEG 400 solution ready
- Prevent formation of aerosols.
Information about protection against explosions and fires:
- Protect from heat.
- The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and containers:
- Storehouses and workplaces must be sufficiently ventilated.
- Keep container tightly closed in a cool and dry place.
Information about storage in one common storage facility:
- Store away from oxidising agents.
- Do not store together with acids.
Further information about storage conditions:
- Keep container tightly sealed.
Specific end use(s)
- No further relevant information available.
-
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 18(4) for transported isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant’s intermediate.
Exposure controls
Personal protective equipment
General protective and hygienic measures
- The usual precautionary measures should be adhered to general rules for handling chemicals.
- Use skin protection cream for preventive skin protection.
- Be sure to clean skin thoroughly after work and before breaks.
- Take off immediately all contaminated clothing
- Wash hands during breaks and at the end of the work.
- Store protective clothing separately.
Breathing equipment:
- In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
- Filter A
Protection of hands:
- Only use chemical-protective gloves with CE-labelling of category III (EN 374).
Material of gloves
- Butyl rubber, BR
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material
- The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable:
- Butyl rubber, BR
Eye protection:
- Tightly sealed safety glasses.
- Gauze goggles
Body protection:
- Impervious protective clothing
-
Stability and reactivity
Chemical stability
Thermal decomposition / conditions to be avoided:
- No decomposition if used according to specifications.
Possibility of hazardous reactions
- Reacts with strong acids
Conditions to avoid
- No further relevant information available.
Incompatible materials:
- No further relevant information available.
Hazardous decomposition products:
- Phenol
-
Disposal considerations
Waste treatment methods
Recommendation
- Remove according to local authority recommendations, e.g. convey to a suitable incinerator.
European waste catalogue
- The disposal of waste within the EU is regulated by Directive 2008/98/EC
- The waste code classification is to be carried out according to the European Waste Catalogue (EWC) specifically for each branch of industry and each type of process.
Uncleaned packagings:
Recommendation:
- Disposal must be made according to official regulations.
-
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
