Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Fire-fighting measures

Accidental release measures

Handling and storage

Precautions for safe handling

DO NOT handle, store or open near an open flame, sources of heat or sources of ignition. Protect

material from direct sunlight. All equipment used when handling the product must be grounded.

Use good personal hygiene practices Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get

this material in contact with eyes. Do not get this material in contact with skin. Do not get this

material on clothing. Wear personal protective equipment. Do not use in areas without adequate

ventilation. Avoid prolonged exposure. Wash thoroughly after handling. "Empty" containers retain

product residue (liquid or vapor) and can be dangerous. Do not reuse empty containers. Organics

can obtain an electrostatic charge during processing activities including: storage, mixing, filtering,

or pumping which may represent a spark hazard and, therefore, a fire hazard. Also, a sudden

release of such materials from storage or process equipment particularly at elevated temperatures,

and/or pressures, can result in ignitions from static absent any apparent ignition source.

Flashpoint and autoignition values obtained from standard test conditions may not be applicable to

other situations and, thus, the safe use of this material in any process should be reviewed by one

familiar with both the storage, processing conditions and this material. Note: materials that are

static accumulators may have such high potential differences created that such a situation may

result in a discharge as sparks capable of causing ignition of organic vapors. Such discharges can

occur from insulated conductors (plant items, drums), bulk liquids, mists and insulating plastic

materials.

Conditions for safe storage, including any incompatibilities

Use care in handling/storage. The pressure in sealed containers can increase under the influence

of heat. Keep away from heat and sources of ignition. This material can accumulate static charge

which may cause spark and become an ignition source. Prevent electrostatic charge buildup by

using common bonding and grounding techniques. Store in a wellventilated place. Keep container

tightly closed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls

Ensure adequate ventilation, especially in confined areas. Ventilation should be sufficient to

effectively remove, and prevent buildup of, any vapors, dusts, or fumes that may be generated

during handling or thermal processing. In order to ensure appropriate electrical safety practices

are followed, consult applicable standards. These may include guidelines such as the National Fire

Protection Association [NFPA] 70, "The National Electrical Code" and NFPA 499, "Recommended

Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for

Electrical Installations in Chemical Process Areas ". NOTE: since this material's vapors, dust or

fumes can form explosive mixtures in air, ensure that any potential areas where explosions may

occur are designed to minimize potential damage. For recommendations to prevent such

explosions and associated damage, consult applicable guidelines such as NFPA 69, "Standard on

Explosion Prevention Systems" and/or NFPA 68, "Guide for Venting Deflagrations".

Individual protection measures, such as personal protective equipment

General information

Avoid contact with eyes. Avoid contact with skin.

Eye/face protection

Avoid contact with eyes. Wear safety glasses with side shields (or goggles). If splashes are likely to

occur, wear: Faceshield. Eye wash fountain is recommended.

Skin protection

Wear protective gloves. Do not get this material in contact with skin. Wear suitable protective clothing.

Respiratory protection

Do not breathe dust/fume/gas/mist/vapors/spray. If engineering controls do not maintain airborne

concentrations below recommended exposure limits (where applicable) or to an acceptable level

(in countries where exposure limits have not been established), an approved respirator must be

worn. Use a positivepressure airsupplied respirator if there is any potential for an uncontrolled

release, exposure levels are not known, or any other circumstances where airpurifying respirators

may not provide adequate protection.

Hygiene measures

Do not get in eyes, on skin, on clothing. Wash hands after handling and before eating. Handle in

accordance with good industrial hygiene and safety practice.

Stability and reactivity

Disposal considerations