Administrative data
First-aid measures
Inhalation: Move to fresh air . If symptoms persist, call a doctor.Skin conact wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.Eye contact Rinse thoroughly with plenty of water for at least 15 mins, lifting lower and upper eyelids. Consult a doctor .Ingestion Immediately rinse mouth with water. DO NOT induce vomiting. Never give anything by mouth to an unconsciuos person. Get medical attention.
Fire-fighting measures
Extinguishing media :-Suitable Extinguishing MediaDry chemical, CO 2, water spray or regular foam. Unsuitable Extinguishing MediaNo information available Special hazards arising from the substance or mixture Thermal decomposition can lead to release of irritating gases and vapours Advice for firefighters :- Wear self-contained breathing apparatus and protective suit. Use personal protective equipment.
Accidental release measures
Personal precautions, protective equipment and emergency procedures :-Use personal protective equipment.Avoid contact with skin, eyes or clothingEvacuate personnel to safe areasKeep people away from and upwind of spill/leak Environmental precautions :-Prevent entry into waterways, sewers, basements or confined areasDo not flush into surface water or sanitary sewer systemPrevent product from entering drains Methods and material for containment and cleaning up :-Prevent further leakage or spillage if safe to do so. Use personal protective equipment. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly. After cleaning, flush away traces with water.
Handling and storage
Precautions for safe handling Advice on safe handlingAvoid inhalation of dusts. Avoid contact with skin and eyes. Ensure adequate ventilation. General Hygiene ConsiderationsHandle in accordance with good industrial hygiene and safety practice. Conditions for safe storage, including any incompatibilities Technical measures and storage conditionsKeep container tightly closed in a dry and well-ventilated place. Incompatible Materialsoxidising agents.
Marine transport (UN RTDG/IMDG)
Exposure controls / personal protection
Engineering measures Ensure adequate ventilation, especially in confined areas. Personal protective equipment Eye Protection Wear eye/face protection. Hand Protection Wear protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on breakthrough time for specific gloves. Skin and body protection Wear suitable protective clothing and gloves. Respiratory protection Ensure adequate ventilation. General Hygiene Considerations When using do not eat, drink or smoke. Take off contaminated clothing and wash before re-use. Regular cleaning of equipment, work area and clothing is recommended.
Stability and reactivity
Reactivity :-No data available. Chemical stability :-Stable under normal conditions. Explosion Data Sensitivity to Mechanical Impact none. Sensitivity to Static Discharge none. Possibility of hazardous reactions:- Possibility of hazardous reactions None under normal processing. Conditions to avoid:- None known. Incompatible materials:- oxidising agents. Hazardous decomposition products :-None under normal use conditions.
Disposal considerations
Waste treatment methods Waste from residues/unused products Do not empty into drains. Disposal should be in accordance with applicable regional, national and local laws and regulations. Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers.
