Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 476-670-7 | CAS number: -
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- bulk density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2016
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: study without GLP
- Qualifier:
- according to guideline
- Guideline:
- other: PN-EN 1236:1999
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: ISO 3944:1992 modified
- Deviations:
- no
- GLP compliance:
- no
- Type of method:
- pycnometer method
- Key result
- Type:
- bulk density
- Density:
- 850 kg/m³
- Temp.:
- 20 °C
- Conclusions:
- Bulk density (loose): 850 kg/m3 ±50 kg/m3
- Executive summary:
The bulk density of Fe(III)IDHA was determinedaccording to procedure ISO 3944:1992 modified;PN-EN 1236:1999.
The sample of FeIDHA is poured into themeasuring cylinder with known volume (with accuracy 1 cm3), using the funnel.
The funnel should be closed during dosing the sample; then the bolt closing the funnel is removed. The sample should fill the cylinder during 6 to 12 s.
After filling in the cylinder over the above edge, the excess of the sample is removed by spatula, avoiding shaking of the cylinder.
The cylinder is weighting on the scale with the precision of measurement 1 g.
Two measurements are conducted for two portions of the sample from one batch part.
As final result, a bulk density of 850 kg/m³ ± 50 kg/m³ is reported.
Reference
No |
Result |
Average |
1 |
873 kg/m3 |
850 kg/m3 |
2 |
827 kg/m3 |
Description of key information
Fe(III)IDHA: a bulk density of 850 kg/m³±50 kg/m³ is reported.
Key value for chemical safety assessment
- Relative density at 20C:
- 850
Additional information
The bulk density of Fe(III)IDHA was determined according to PN-EN 1236:1999 and amounts to 850 kg/m3±50 kg/m3.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
