Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 471-140-1 | CAS number: 121240-56-0
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Supply fresh air. If patient has difficulty in breathing,
administer oxygen, keep him calm and protect him from loss
of warmth. Seek medical advice immediately.
Emergency measure - Eyes: Open the eyelids and rinse for an adequate length of time
with water. Consult an eye specialist immediately.
Emergency measure - Skin: Remove patients from danger zone.
Remove contaminated or soaked clothing (including underwear
and shoes) immdediately. Also heed the risks to your own person.
Wash skin immediately with plenty of
water and soap. Apply calcium gluconate gel to the affected area, rub in until locally free of pain and then continue
for further 15 minutes. If skin reactions occur, contact a
physician.
Emergency measure - Ingestion: At once make patient drink copious amounts of water, if possilble milk, in sips. The mouth should be rinsed out
several times. Do not induce vomiting. Medical treatment is
required as soon as possible.
Information for the physician:
Therapeutic measures: Basic aid, decontamination, symtomatic
treatment. Treat with a corticoid metered aerosol depending
on the amount inhaled.
Fire-fighting measures
Recommended extinguishing agent: Extinguishing media: water mist, foam, dry powder, carbon
dioxide - never use direct water jet.
Product arising from burning: Thermal decomposition: no thermal decomposition when stored and handled correctly.
Hazardous decomposition products: No hazardous decomposition
products when stored and handled correctly. Formation of
carbon monoxide, carbon dioxide, hydrogen fluoride, phosphorous pentoxide, tributylphosphine,
tributylphosphine oxide in the event of fire or during
thermal decomposition.
Protective equipment: During fire-fighting respirator with independent air-supply
and airtight garment is required. Containers at risk from
fire should be cooled with water and, if possible, removed from danger area. When extinguishing with water pay attention to caustic burns. Do not let enter contaminated extinguishing water into soil, groundwater or surface
waters.
Accidental release measures
Emergency measures in case of spillage: Take up mechanically, having either surrounded and/or
absorbed the substance with absorbent material, e.g. sawdust or sand. Fill into labelled , sealable containers. Remove
sources of fire, ensure adequate ventilation/exhaust
ventilation. Keep unauthorised persons away. Do not allow to
enter into surface waters or groundwater. Avoid any contact
with product. Use the necessary personal equipment when handling.
Handling and storage
Handling:
Working procedures should be arranged in such a way that
employees are exposed as little as possible to the effects
of the product.
Make sure all pipelines, tanks and equipment are leakproof.
Ensure effective ventilation. Vent waste air only via
suitable separators or scrubbers.
Do not allow to escape into waters, wastewater or soil.
Storage:
Store sealed in original container in a cool, dry place.
Protect from sunlight.
Take precautionary measures against static discharges. Keep
away from/remove sources of ignition. Ventilation systems
must be installed.
Store in steel-drums, 50 to 200 l.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: UN-Nr. 3265
Further Transport codes: class 8, packaging group III.
The producer uses packaging for the product, which meets the requirements for products with a hazard potential as far as tightness and stability areconcerned. Consequently, transport is possible without increased danger as long as attention is paid to the usual measures such as stack height, protection against falling and correct labelling. In the case of partially fractured containers, these must be kept closed carefully on any transport, in order to prevent spillage.
Additional info: slightly corrosive, keep separated from foodstuffs.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Respiratory protection: Combination filter against organic vapours and particles, e.g. DIN 3181 ABEK. At substantial vapour concentration respirator with independent supply must be used.
Eye protection: Goggles.
Hand protection: Gloves of Baypren, Viton or PVC.
Other protective equipment: Impervious protective clothing.
In special cases additional measures for personal protection may be necessary, e.g. wearing protective hood, chemical-resistant gloves or boots, and chemical-resistant suit with or without independent air supply.
Careful attention to industrial and personal hygiene is essential. Contact with skin and eyes and inhalation of vapours must be avoided. Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at end of work. Keep working clothes separate. If the suit becomes contaminated, frist take a shower with the suit on, then scrub the skin thoroughly with water. Remove contaminated or soaked clothing (including underwear and shoes) immediately.
Stability and reactivity
Danger other than fire: No hazardous reaction when used as
directed.
Take precautionary measures against static discharges.
Keep away from sources of ignition.
Chemical reaction with water: No hazardous reaction expected when used as directed.
Dust explosion: Liquid product.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: The substance itself will be totally consumed during
processing.
Uncleaned empty containers should be packaged, sealed,
labelled, and disposed of or recycled according to relevant
national and local regulations. Where large quantities are concerned, consult the supplier.
Industry - Possibility of neutralisation: None known.
Industry - Possibility of destruction: controlled discharge: Just controlled incineration recommended.
Industry - Possibility of destruction - incineration: Code: 663
Incineration at high temperatures - long-term incineration
with flue gas scrubber system, minimum temperature 1200 °C,
minimum period 2 seconds, surplus of oxygen.
Industry - Possibility of destruction - water purification: Not applicable.
Industry - Possibility of destruction - other: Not applicable.
Public at large - Possibility of recovery/recycling: The substance will not occur in public at large.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
