Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 458-180-5 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Using appropriate personal protective equipment, move
exposed subject to fresh air. If breathing is difficult or
ceases, ensure and maintain ventilation. Give oxygen as
appropriate. The exposed subject should be kept warm and at
rest. Obtain medical attention.
Emergency measure - Eyes: Wash immediately with clean and gently flowing water.
Continue for at least 15 minutes. Obtain medical attention.
Emergency measure - Skin: Using appropriate personal protective equipment, remove
contaminated clothing and flush exposed area with large
amounts of water. Obtain medical attention if skin reaction
occurs, which may be immediate or delayed.
Emergency measure - Ingestion: Obtain immediate medical attention.
Fire-fighting measures
Recommended extinguishing agent: No special requirements needed. Water is recommended for
fires involving packaging.
Product arising from burning: Oxides of carbon and nitrogen and halogen containing
compounds.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Accidental release measures
Emergency measures in case of spillage: Fence or cordon the affected area and do not allow
individuals to touch or walk through the spilled material
unless wearing appropriate protective equiment. Avoid dust
generation.
Prevent entry into waterways, sewers, surface drainage
systems and poorly ventilated areas. If spill is outdoors,
cover with plastic sheet to minimise spreading or contact
with rain.
Collect and place in a suitable, properly labelled container
for recovery or disposal. Following removal of spillage,
wash down spillage area with copious amounts of water only
if waste water can be directed to an on-site waste water
treatment system.
No specific decontamination or detoxification procedures
have been identified for this material. Consider the use of
water, detergent solutions, or other soluble solvents for
clean-up and decontamination operations.
Handling and storage
Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical protective clothing to Standard EN368
Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling
exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.
Depending on the scale of the operation, a fume cupboard or
exhaust ventilation is recommended to routinely control
exposure.
These measures should be regarded as a minimum.
Storage: Keep in tightly closed containers or packages away from
moisture and sources of ignition.
Avoid prolonged storage at elevated temperatures (greater
than room temperature, approximately 20°C).
Packaging of the substance and or preparation: Material will be in anti-static polythene continuous liner
inside poly-lined fibre board kegs. Approximately 3 x 10 kgs
bags in each keg.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None.
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported
Chemical reaction with water: None reported
Dust explosion: Minimium Ignition Temperature-Cloud: >800°C
Minimum Ignition Temperature-Layer: No ignition or exotherm
observed up to 400 Deg C
No expected risk of dust explosion
Dust explosion determined by test: Y
Disposal considerations
Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration. In principle,
it may be possible to recover larger spillages of
uncontaminated material for subsequent use.
Industry - Possibility of neutralisation: The notification tests have shown that the substance is not
provisionally classified at the VIIA level of notification
with regards to human health.
The dust hazard will be minimised by appropriate handling
and storage.
No chemical treatment is practicable to neutralise the
hazardous environmental properties.
Industry - Possibility of destruction: controlled discharge: Not recommended.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon and
nitrogen oxides and halogen containing compounds) could be
formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: None.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
