Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 457-020-1 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove from exposure. If there is difficulty in breathing,
give oxygen. Immediate medical attention is required.
Emergency measure - Eyes: Immediately flush the eye with plenty of water for at least
15 minutes, holding the eye open. Obtain medical attention
if soreness or redness persists.
Emergency measure - Skin: Obtain medical attention if blistering occurs or redness
persists. Wash skin with water.
Emergency measure - Ingestion: Wash out mouth with water. Obtain medical attention.
Fire-fighting measures
Recommended extinguishing agent: Dry chemical, dry sand
Product arising from burning: COx, NOx, SO2
Product determined by test: N
Protective equipment: Wear full protective clothing and self-contained breathing
apparatus.
Accidental release measures
Emergency measures in case of spillage: Sweep up into suitable containers for recovery or disposal.
Avoid dust formation.
Handling and storage
Handling: The test substance will only be used in the IC industry by
trained personnel. Exposure is minimal. Skin Contact is
avoided by the use of chemical resistant gloves and suitable
protective clothing. Inhalation is avoided by the use of
appropriate respirators. Mechanical room ventilation is
provided, and special local exhaust is recommended at points
where vapors can be released into the workplace air.
Storage: Store in original container. Keep away from heat, sparks,
flame and other sources of ignition. Storage area should be:
cool dry well ventilated out of direct sunlight away from
incompatible materials.
Packaging of the substance and or preparation: The preparation is packaged into either one gallon or one
quart bottles (glass or plastic). These are placed into a
plastic bag, which is tied. The bottles are transported in
a cardboard box.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: UN 3226
Transport: Shipping name: Self-reactive solid type D (Diazo photoactive
compound)
Class 4.1
Packing group II
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: Dusts at sufficient concentrations can form explosive
mixtures with air.
Chemical reaction with water: None
Dust explosion: Dust explosion is likely. Substance is only imported and
used in the E.U. in a solution system (>90% solvent)
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: 610A Recovery, not specified
The substance will only be imported into the EU in a
preparation. Due to the low concentration of the substance
in the product formulation, recovery would not be
effective.Contaminated product cannot be recycled in most
cases.
Industry - Possibility of neutralisation: 630A Neutralisation, not specified
Not applicable.
Industry - Possibility of destruction: controlled discharge: 660A Incineration, not specified
Contaminated containers or spillages of the preparation
mixed with inert material (e.g. sand or soil) may be
disposed of at an authorized tip in accordance with local
regulations.
Industry - Possibility of destruction - incineration: 660A Incineration, not specified
The usual route to destruction of this material is by
dissolution into a cleaning or wash solvent followed by
incineration.
Industry - Possibility of destruction - water purification: 640A Removal, not specified
In the unlikely event that the preparation should enter
the water treatment systems, contaminated water should be
treated by means of flocculation precipitation. The
precipitated material should be incinerated.
Industry - Possibility of destruction - other: None known.
Public at large - Possibility of recovery/recycling: Not applicable. Substance will not be available for the
public at large.
Public at large - Possibility of neutralisation: Not applicable. Substance will not be available for the
public at large.
Public at large - Possibility of destruction: controlled discharge: Not applicable. Substance will not be available for the
public at large.
Public at large - Possibility of destruction - incineration: Not applicable. Substance will not be available for the
public at large.
Public at large - Possibility of destruction - water purification: Not applicable. Substance will not be available for the
public at large.
Public at large - Possibility of destruction - others: Not applicable. Substance will not be available for the
public at large.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
