Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 444-920-4 | CAS number: - CYPRISATE; FORMERLY CYPRISSATE
Guidance on Safe Use
Administrative data
First-aid measures
General advice : Do not leave the victim unattended.
If inhaled : If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
In case of skin contact : Take off contaminated clothing and shoes immediately. If on skin, rinse well with water.
In case of eye contact : Remove contact lenses. Immediately flush eyes for at least 15 minutes. Get medical
attention.
If swallowed : Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media : Dry chemical, Alcohol-resistant foam, Carbon dioxide (CO2), Water spray
Unsuitable extinguishing media : no data available
Special hazards arising from the substance or mixture
Specific hazards during firefighting : Do not allow run-off from fire fighting to enter drains or water courses.
Advice for firefighters
Special protective equipment : Wear self-contained breathing apparatus for firefighting if for firefighters necessary.
Further information : Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions : no data available
Environmental precautions : Prevent product from entering drains. If the product contaminates rivers and lakes or drains inform respective authorities.
Methods for cleaning up : Wipe up with absorbent material (e.g. cloth, fleece). Keep in suitable, closed containers for disposal.
Handling and storage
Precautions for safe handling
Advice on safe handling : For personal protection see section 8 of the SDS. Smoking, eating and drinking should be prohibited in the application area.
Advice on protection against fire and explosion : Normal measures for preventive fire protection.
Temperature class : no data available
Fire-fighting class : no data available
Dust explosion class : no data available
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers : Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Electrical installations / working materials must comply with the technological safety standards.
Further information on storage conditions: Ambient / 10-30°C (50-85°F), Dry, well ventilated, preferably full, hermetically sealed
Advice on common storage : Protect against light.
Storage class (TRGS 510) : 10 Combustible liquids
Other data : No decomposition if stored and applied as directed.
Specific use(s) : no data available
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Additional transport information
Additional information
- Special provisions / remarks / other:
- Not regulated as a dangerous good
Exposure controls / personal protection
Control parameters
Contains no substances with occupational exposure limit values.
Exposure controls
Exposure assessment: Exposures are dependent on the product being handled, the potential for chemical release, and any resulting airborne concentrations or dermal contact. Since product handling and release scenarios vary, and no two workplaces are exactly alike, it is recommended that the potential for exposure be assessed prior to the prod-uct’s use or introduction. Exposure assessments should be performed by an occupational hygienist, industrial hygienist, or other qualified occupational or environmental health professional. An exposure assessment should be conducted to determine the efficacy of any ventilation and the need for additional PPE. The PPE indicated below are recommendations for worst-case scenario exposures. An exposure assessment will identify more applicable measures to be implemented. EN and ANSI standards are mentioned in the following recommendations, consult equivalent local standards when required.
PPE is always the last resort to avoid exposure. In any case technical and organisational measures have to be explored and used prior to the selection of PPE. The PPE selection is for operators trained to work with chemicals according to good industrial hygiene and safety practice. Operators have to be trained on the use of PPE.
Engineering measures
Use engineering controls to maintain airborne levels below exposure limit requirements or
guidelines. If there are no applicable exposure limit requirements or guidelines, use the product
only with adequate ventilation.
Personal protective equipment
Eye/face protection : Use safety glasses tested according to EN 166/ANSI Z87.1 or equivalent local standard.
Hand protection : Use gloves when handling substance in open systems. Inspect gloves prior to use. Train operators for proper use. If only incidental exposure is expected: (work without direct contact to substance) use gloves tested according EN 16523-1/ASTM F739 or equivalent local standard breakthrough times at least 10 minutes, tested for chemicals indicated in chapter 3 of this SDS. Change gloves frequently.
If direct skin contact is expected: use gloves tested according to EN 16523-1/ASTM F739 or equivalent local standard,
tested for chemicals indicated in chapter 3 of this SDS. Permeation time must exceed contact time.
Other skin protection : Wear working clothes covering arms and legs.
Respiratory protection : Under normal use conditions, no respiratory protection should be needed. However, if discomfort is experienced, use an approved air-purifying respirator.
Thermal hazards : Wear appropriate thermal protective clothing, when necessary.
Hygiene measures : Remove contaminated clothing and protective equipment before entering eating areas. Do not eat, drink or smoke during work. Wash hands any time after handling the product.
Environmental exposure controls
General advice : Prevent product from entering drains. If the product contaminates rivers and lakes or drains inform
respective authorities.
Stability and reactivity
Reactivity
none
Chemical stability
The product is chemically stable.
Possibility of hazardous reactions
Hazardous reactions : Stable under recommended storage conditions., No hazards to be specially mentioned.
Conditions to avoid
Conditions to avoid : no data available
Incompatible materials
Materials to avoid : no data available
Hazardous decomposition products
Hazardous decomposition products : no data available
Thermal decomposition : no data available
Disposal considerations
Waste treatment methods
Product : The product should not be allowed to enter drains, water courses or the soild.
Dispose of in accordance with local regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
