Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 439-820-2 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. Keep person warm and at rest. If
breathing stops, begin artifical respiration.
Emergency measure - Eyes: Immediately flush eyes with plenty of water for at least 15
minutes. Seek medical attention.
Emergency measure - Skin: Remove contaminated clothing. Wash affected area with soap
and water. Seek medical attention if irritation develops.
Emergency measure - Ingestion: Seek medical attention.
Fire-fighting measures
Recommended extinguishing agent: Dry chemical, foam or carbon dioxide extinguishers may be
used.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and phosphorus
oxides). However, there is no experimental evidence to
support the anticipated combustion products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.
Absorb spillages of solutions with a suitable inert material
(eg sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.
Clean the spillage area with water and detergent.
Dispose of waste material by incineration in accordance with
local regulations.
Handling and storage
Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical resistant clothing to Standard EN368
Eye protection to Standard EN166
When necessary appropriate respiratory protection should be
used. e.g. a vapour mask conforming to EN405 FFA1.
The standards mentioned above should be regarded as a
minimum.
Storage: Store at around 40°C in a dry, well-ventilated area.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: 220 to 250 kg drums.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported.
Chemical reaction with water: None reported.
Dust explosion: There is no dust explosion hazard from this semi-solid
material.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment will not occur. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.
Industry - Possibility of neutralisation: The notification tests have shown that the substance is
notconsidered hazardous to health or the environment.
Industry - Possibility of destruction: controlled discharge: Not recommended.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
phosphorus oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable as the neat substance will not be made
available to the general public.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Finished products containing small amounts of the substance
bound into polyurethane foam may be disposed of via
landfill.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
