Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 429-690-5 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove casualty to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give
oxygen. seek medical attention.
Emergency measure - Eyes: Check for and remove any contact lenses. In case of contact,
immediately flush eyes with running cold water for at least
15 minutes. Seek medical attention immediately.
Emergency measure - Skin: In case of contact with skin, wash off immediately with
plenty of cold water for at least 15 minutes while removing
contaminated clothing and shoes. Wash clothing before
re-use. Thoroughly clean shoes before re-use. Seek medical
attention immediately.
Emergency measure - Ingestion: Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious
person. Loosen tight clothing such as a collar, tie, belt or
waistband and seek medical attention immediately.
Fire-fighting measures
Recommended extinguishing agent: For small fires, use dry chemical powder. For larger fires,
use water spray, fog or foam. Do not use water jet.
Product arising from burning: Combustion products are nitrogen oxides (NO, NO2) and carbon
oxides (CO, CO2).
Product determined by test: N
Protective equipment: Fire fighters should wear full contained breathing apparatus
and protective clothing.
Accidental release measures
Emergency measures in case of spillage: Always wear the recommended personal protective equipment.
Eliminate sources of ignition and strong acids. Provide
ventilation to appropriate area. Absorb with inert absorbent
and place in a closed, appropriately labelled waste
container. Contain area and dilute with water and mop up
spill. If necessary, neutralise with a dilute solution of
acetic acid.
Handling and storage
Handling: Always wear recommended personal protective equipment (full
protective overalls, butyl rubber or neoprene gloves, rubber
footwear, face shield and half mask respirator (BS2091)
fitted with an Ammonia/methylamine cartridge (filter K)).
Use local exhaust ventilation.
Storage: Store in a cool, well ventilated place, away from acids or
other strong oxidising agents. Keep away from sources of
ignition. Keep containers upright and in tightly sealed
appropriately labelled containers. Protect from physical
damage.
Packaging of the substance and or preparation: 215 litre steel drum (no liner present).
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: UN 2735 ADR 8,53(c), Packaging group III
Transport: Containers should be correctly labelled and secured from
falling over.
Amines, liquid, corrosive n/o/s
(poly[oxy(methyl-1,2-ethanediyl)],alpha,alpha'-(oxydi-2,1-et
hanediyl)bis[omega-(aminomethylethoxy)-]
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: Reacts violently with acids. Hazardous polymerisation does
not occur.
Chemical reaction with water: No chemical reaction with water.
Dust explosion: Not applicable as the substance is a liquid.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: It is not possible to re-use or recover the used substance.
Industry - Possibility of neutralisation: Neutralise to neutral pH by using dilute acetic acid.
Industry - Possibility of destruction: controlled discharge: Not recommended.
Industry - Possibility of destruction - incineration: Incinerate above 1200°C in a licensed facility, with waste
gas treatment, to remove nitrogen oxides (use incineration
code 663).
Industry - Possibility of destruction - water purification: Not applicable.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: The substance as such is not available to the public at
large.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
