Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 428-870-0 | CAS number: 1379678-91-7
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. If irritation occurs seek medical
attention.
Emergency measure - Eyes: Wash with water for 15 minutes. If irritation occurs seek
medical attention.
Emergency measure - Skin: Remove contaminated clothing and launder before re-use. Wash
skin with soap and water. If irritation occurs seek medical
attention.
Emergency measure - Ingestion: Seek medical attention.
Fire-fighting measures
Recommended extinguishing agent: Carbon dioxide, water spray or dry foam.
Product arising from burning: Products of combustion may contain oxides of carbon.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards.
Absorb spillages of solutions with a suitable inert material
(eg. sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original substance containers.
Clean the spillage area with water. Do not wash to drain.
Dispose of waste material in accordance with local
regulations by incineration.
Handling and storage
Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard prEN374
Chemical protective clothing to Standard EN368
Eye protection to Standard prEN166.
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a vapour mask
conforming to EN405 FFA1.
These measures should be regarded as a minimum.
Storage: Store in a cool dry well-ventilated room.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: 200kg carbon steel drums.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported
Chemical reaction with water: None which is hazardous.
Dust explosion: Not applicable to a liquid.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment should be avoided. Recovery
from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration. In principle,
it may be possible to recover larger spillages of
uncontaminated material for subsequent use.
Industry - Possibility of neutralisation: None known
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon
oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment.
Public at large - Possibility of recovery/recycling: The substance will only enter the public domain in the form
of painted articles which can be disposed of as domestic
waste.
Public at large - Possibility of neutralisation: Not applicable as 100% of the substance used in industry.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
