Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. If irritation persists seek

medical attention.

Emergency measure - Eyes: Flush eyes with water for at least 15 minutes. Seek

immediate medical attention.

Emergency measure - Skin: Wash affected area with soap and water. Remove and relaunder

any exposed clothing.

Emergency measure - Ingestion: Drink plenty of water. Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water, Dry chemical, Foam, CO2

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg carbon and nitrogen

oxides). However, there is no experimental evidence to

support the anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to

the relevant national or international standards as

mentioned in section 2.3.10.

Avoid dust formation by damping down with water. Absorb

spillages of solutions with a suitable inert material (eg

sand or soil). Carefully transfer the spillage to waste

containers, or use a sealed industrial vacuum machine.

Containers filled with waste material must be labelled in

the same way as the original containers.

Clean the spillage area with water and detergent.

Dispose of waste material by incineration in accordance with

local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard prEN166

When necessary appropriate respiratory protection should be

used. e.g. a dust mask conforming to EN149 FFP1.

The standards mentioned above should be regarded as a

minimum.

Storage: Store at approximately 15°C in a dark, dry, well-ventilated

area, away from sources of heat or static discharge.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Plastic bottle containing a maximum of 0.5 kg.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: Avoid crushing or dropping the containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None which is hazardous.

Dust explosion: Not anticipated.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from

minor spillages or accidental discharge is not economically

or technically feasible, and such waste material will be

disposed of by incineration or landfill.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is

considered hazardous to health by acute oral ingestion.

No chemical treatment is practicable to neutralise the

hazardous health properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with

inert material (eg sand or soil) may be disposed of by

landfill at an authorised tip in accordance with local

regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

should be scrubbed, because noxious fumes (eg carbon and

nitrogen oxides and soot) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not applicable as 100% of the substance is used by industry.

Public at large - Possibility of neutralisation: Not applicable as 100% of the substance is used by industry.

Public at large - Possibility of destruction: controlled discharge: Not applicable as 100% of the substance is used by industry.

Public at large - Possibility of destruction - incineration: Not applicable as 100% of the substance is used by industry.

Public at large - Possibility of destruction - water purification: Not applicable as 100% of the substance is used by industry.

Public at large - Possibility of destruction - others: Not applicable as 100% of the substance is used by industry.