Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 307-593-8 | CAS number: 97675-24-6
Guidance on Safe Use
Administrative data
First-aid measures
EYE CONTACT: Flush with water at least 15 minutes. Get medical attention if irritation persists.
SKIN CONTACT: Remove contaminated clothing and at the same time cleaning skin as much as possible with absorbent material, then irrigate thoroughly with water, wash skin with plenty of water and soap. If irritation persists seek medical advice.
INGESTION: Do not induce vomiting. Drink plenty of water and seek medical help.
INHALATION: Remove to fresh air. For breathing difficulties oxygen may be necessary. Seek medical assistance.
Fire-fighting measures
FLASH POINT: >210°C (COC)
SUITABLE EXTINGUISHING MEDIA: Use water spray, foam, carbon dioxide, dry sand, dry earth or dry chemical powder to extinguish flames. It depends of size fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None. Very low fire hazard. This material is not explosive.
HAZARDOUS COMBUSTION PRODUCTS: If this material is near of a fire, it can burn and form flammable mixtures or can burn only upon heating to high temperatures, above its flash point.
Toxic gases will form upon combustion such as carbon oxides and sulfur oxides.
SPECIAL FIRE FIGHTING PROCEDURES: Use water spray to cool fire exposed containers, pipelines and structures.
If during firefighting this material is spilled and the water is present, product will behave as an oil and will float on the surface.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS: Protective clothing and self contained breathing equipment should be available for fire-men.
Accidental release measures
PERSONAL PRECAUTIONS:
-Wear personal protective equipment.
-Take care with slippery floors.
- Remove all sources of ignition.
ENVIRONMENTAL PRECAUTIONS:
-Prevent further leakage of spillage if safe to do so.
-Prevent entry to sewers or ground, drains, etc.
METHODS FOR CLEANING: Contain spill to a small area. Pick up with absorbent material and transfer to a suitable container for disposal.
If not contaminated scoop up for re-use. If contaminated, shovel into drums or containers for disposal.
Handling and storage
PRECAUTIONS IN HANDLING AND STORING: Store in carbon steel containers. Protect from moisture. Keep containers tightly closed. Keep away from heat open flames, hot surfaces and sources of ignition.
This product adsorbs strongly to soil and sediments.
HANDLING TEMPERATURE: Do not overheat. Avoid high skin temperatures. Normal temperatures for transfer and blending operations 60-80 ºC
OTHER PRECAUTIONS: Even though the fire hazard is very low, it would not hurt to take caution and use proper grounding procedures. Potential accumulation of static electricity may be present when transferring this product.
INCOMPATIBLE MATERIALS: Strong oxidizing agents, such as chlorates, nitrates and peroxides.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- not applicable
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- not applicable
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- not applicable
Shipping information
- Proper shipping name and description:
- not applicable
- Chemical name:
- not applicable
- Labels:
- not applicable
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- not applicable
Shipping information
- Proper shipping name and description:
- not applicable
- Chemical name:
- not applicable
- Labels:
- not applicable
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
RESPIRATORY PROTECTION: Under normal handling it is not necessary, but only in case of fire or burning, wear respirator where overexposure by inhalation may occur.
VENTILATION: Normal protective measures for organics with flash points > 100ºC
HAND PROTECTION: Chemical and oil resistant gloves.
EYE PROTECTION: Safety glasses.
SKIN PROTECTION: Only wear cotton clothing as normal.
INGESTION PROTECTION: When handling, do not eat, drink or smoke.
Stability and reactivity
REACTIVITY: May react with acids and strong oxidizing agents, such as chlorates, nitrates and peroxides.
STABILITY: Stable.
HAZARDOUS DECOMPOSITION PRODUCTS: Only in case of fire will be form sulfur oxides from combustion.
HAZARDOUS POLYMERIZATIONS: Will not occur.
CONDITIONS TO AVOID: Do not overheat. Avoid high skin temperatures. Normal temperatures for transfer and blending operations 60-80 ºC
MATERIALS TO AVOID: Avoid strong oxidizing agents.
Disposal considerations
Waste disposal: Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration. If during handling the product has been mixture with others compounds then dispose of according to local, state and federal regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
