Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 276-431-5 | CAS number: 72162-23-3 The high-boiling fraction separated by distillation from the products obtained from the reaction of nitric acid with cyclododecanol and cyclododecanone. Composed primarily of dodecanedioic acid, undecanedioic acid, and sebacic acid.
Vapour pressure
Administrative data
Link to relevant study record(s)
Description of key information
METHOD
Instrument: Q50 thermogravimetric analyzer (TGA) (TA Instruments, USA)
Surface of the glass plate: 0.50 cm2
The experiments were performed under a flow of nitrogen and at atmospheric pressure.
PERFORMANCE OF THE TEST
An amount of 12.6 or 17.3 mg of the mortared test substance was applied to the surface of a roughened glass plate as a homogeneous layer using a suspension of the test substance in n-hexane. The plate was dried at 30°C under nitrogen in the TGA.Temperature program:
Start temperature: 50°C
Isothermal intervals: 10 minutes
Increment steps: 10°C
End temperature: 140°C
The weight loss of the test substance was measured continuously as a function of time at defined isothermal temperatures. At temperatures below the melting point of the test substance (i.e. 87°C) , no significant weight loss was observed. The vapour pressure of the test substance was determined using the data obtained at temperatures > melting point .The test substance results were compared with the results of the reference substance hexachlorobenzene from the validation test.
Key value for chemical safety assessment
- Vapour pressure:
- 0.002 Pa
- at the temperature of:
- 20 °C
Additional information
The weight losses of the test substance were obtained with at temperatures above the melting temperature of the test substance. According to this, the vapour pressure of the test substance (which was extrapolated to 20°C and 25°C) could be slightly overestimated.
The vapour pressure of Corfree® M1 diacid mixture at 20°C is < 1.5E-3 Pa.
The vapour pressure of Corfree® M1 diacid mixture at 25°C is < 5.8E-3 Pa.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
