Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice: Move out of dangerous area.

Show this safety data sheet to the doctor in attendance.

Do not leave the victim unattended.

Protection of first-aiders: No action shall be taken involving any personal risk or without suitable training.

If inhaled: If unconscious, place in recovery position and seek medical advice.

In case of skin contact: Wash off with soap and plenty of water.

If symptoms persist, call a physician.

In case of eye contact: Remove contact lenses.

Protect unharmed eye.

Keep eye wide open while rinsing.

If eye irritation persists, consult a specialist.

If swallowed: Keep respiratory tract clear.

Fire-fighting measures

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable extinguishing media: None known

Special hazards arising from the substance or mixture

Hazardous combustion products: Carbon dioxide (CO2)

Carbon monoxide

Oxides of phosphorus

Halogenated compounds

Advice for firefighters

Special protective equipment for firefighters: Wear self-contained breathing apparatus for firefighting if necessary

Further information: Standard procedure for chemical fires.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Accidental release measures

Personal precautions: Use personal protective equipment.

Avoid dust formation.

Environmental precautions: Prevent further leakage or spillage if safe to do so.

Methods for cleaning up: Keep in suitable, closed containers for disposal.

Handling and storage

Manufacture and use of this chemical intermediate takes place under strictly controlled conditions, as described in Art. 17/18 REACH. The substance is rigorously contained during manufacturing and use and appropriate risk management measures including PPE (i.g. during charging or sampling) are applied. Occupational exposure is reduced to a minimum and well controlled by measurements. A management system covering all general aspects of a chemical production is in place, especially cleaning and maintenance of plants and equipment. An authorisation scheme based on instructions covering the whole process ensures that only trained and authorised staff handles the substance.

Advice on safe handling: Avoid formation of respirable particles.

Do not breathe vapours/dust.

Do not smoke.

Dispose of rinse water in accordance with local and national regulations.

Smoking, eating and drinking should be prohibited in the ap-plication area.

This substance should be handled under strictly controlled conditions as specified in REACH regulation article 18(4). Site documentation to support safe handling arrangements in ac-cordance with risk-based management system should be available at each manufacturing site. During the whole lifecy-cle all necessary measures should be undertaken to minimize emissions and any resulting exposure.

Advice on protection against fire and explosion: Normal measures for preventive fire protection. Provide appropriate exhaust ventilation at places where dust is formed.

Hygiene measures: General industrial hygiene practice.

Wash hands before breaks and at the end of workday.

Requirements for storage areas and containers: Keep container tightly closed in a dry and well-ventilated place. Electrical installations / working materials must comply with the technological safety standards.

Further information on storage stability: Keep in a dry place

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Contains no substances with occupational exposure limit values.

Exposure controls

Engineering measures

If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local ex-haust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

Personal protective equipment

Eye protection:Tightly fitting safety goggles

Hand protection

Material: Butyl rubber - IIR

Wearing time:< 60 min

Material: Nitrile rubber - NBR

Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves.

After contamination with product change the gloves immedi-ately and dispose of them according to relevant national and local regulations

Skin and body protection: Complete suit protecting against chemicals

Respiratory protection: In case of dust formation particle filter.

Filter type: P1 filter

Stability and reactivity

Reactivity: No specific test data related to reactivity available for this product or its ingredients.

Chemical stability: Stable under normal conditions.

Possibility of hazardous reactions

Hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.

Conditions to avoid: No data available

Materials to avoid: Strong oxidizing agents

Hazardous decomposition products

No hazardous decomposition products are known.

Disposal considerations

Waste treatment methods

Product: Do not contaminate ponds, waterways or ditches with chemi-cal or used container.

Do not dispose of waste into sewer.

Send to a licensed waste management company.

Contaminated packaging: Empty remaining contents.

Dispose of as unused product.

Do not re-use empty containers.