Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 212-849-6 | CAS number: 873-69-8
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
· General information:
-Personal protection for the First Aider.
-Immediately remove any clothing soiled by the product.
-Take affected persons out of danger area and lay down.
-Position and transport stably on side.
-Artificial respiration with respiration bag or respirator
· After inhalation:
-Take affected persons into fresh air and keep quiet.
-Seek medical treatment in case of complaints.
· After skin contact:
-Immediately wash with water and soap and rinse thoroughly.
-If skin irritation continues, consult a doctor.
· After eye contact:
-Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
-Rinse out mouth and then drink plenty of water.
-Vomiting, possible danger of aspiration, keep breathing passages free
-Induce vomiting, only if affected person is fully conscious.
-Seek immediate medical advice.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed : No further relevant information available.
· Indication of any immediate medical attention and special treatment needed : No further relevant information available.
-Personal protection for the First Aider.
-Immediately remove any clothing soiled by the product.
-Take affected persons out of danger area and lay down.
-Position and transport stably on side.
-Artificial respiration with respiration bag or respirator
· After inhalation:
-Take affected persons into fresh air and keep quiet.
-Seek medical treatment in case of complaints.
· After skin contact:
-Immediately wash with water and soap and rinse thoroughly.
-If skin irritation continues, consult a doctor.
· After eye contact:
-Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
-Rinse out mouth and then drink plenty of water.
-Vomiting, possible danger of aspiration, keep breathing passages free
-Induce vomiting, only if affected person is fully conscious.
-Seek immediate medical advice.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed : No further relevant information available.
· Indication of any immediate medical attention and special treatment needed : No further relevant information available.
Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents : CO2, extinguishing powder or water spray. Fight larger fires with water spray.
· Special hazards arising from the substance or mixture
-Nitrogen oxides (NOx)
-Hydrogen cyanide (HCN)
-Carbon monoxide and carbon dioxide
-Danger of toxic pyrolysis products.
· Advice for firefighters
· Protective equipment:
-Wear fully protective suit.
-Do not inhale explosion gases or combustion gases.
-Self-contained respiratory protective device.
· Additional information
-Collect contaminated fire fighting water separately. It must not enter the sewage system.
· Suitable extinguishing agents : CO2, extinguishing powder or water spray. Fight larger fires with water spray.
· Special hazards arising from the substance or mixture
-Nitrogen oxides (NOx)
-Hydrogen cyanide (HCN)
-Carbon monoxide and carbon dioxide
-Danger of toxic pyrolysis products.
· Advice for firefighters
· Protective equipment:
-Wear fully protective suit.
-Do not inhale explosion gases or combustion gases.
-Self-contained respiratory protective device.
· Additional information
-Collect contaminated fire fighting water separately. It must not enter the sewage system.
Accidental release measures
· Personal precautions, protective equipment and emergency procedures
-Use respiratory protective device against the effects of fumes/dust/aerosol.
-Wear protective equipment. Keep unprotected persons away.
-Keep away from ignition sources
· Environmental precautions: Do not allow to enter sewers/ surface or ground water.
· Methods and material for containment and cleaning up:
-Pick up mechanically.
-Dispose contaminated material as waste according to the local / regional / national / international regulations. Details have to be arranged with the authority concerned and / or the local waste management enterprise..
-Use respiratory protective device against the effects of fumes/dust/aerosol.
-Wear protective equipment. Keep unprotected persons away.
-Keep away from ignition sources
· Environmental precautions: Do not allow to enter sewers/ surface or ground water.
· Methods and material for containment and cleaning up:
-Pick up mechanically.
-Dispose contaminated material as waste according to the local / regional / national / international regulations. Details have to be arranged with the authority concerned and / or the local waste management enterprise..
Handling and storage
· Handling:
· Precautions for safe handling
-Ensure good ventilation/exhaustion at the workplace.
-Development and deposition of dust has to be avoided.
· Information about protection against explosions and fires:
-Keep ignition sources away
-Do not smoke.
-Protect against electrostatic charges.
-Dust can combine with air to form an explosive mixture.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles : Store only in the original receptacle.
· Information about storage in one common storage facility:
-Do not store together with strong acids, alkalines and oxidation agents
-Store away from metals.
-Do not store together with metal salts
· Further information about storage conditions:
-Store in cool, dry conditions in well sealed receptacles.
-Store receptacle in a well ventilated area.
-This product is hygroscopic.
-Protect from humidity and water.
· Recommended storage temperature: at 15 °C to 25 °C
· Specific end use(s) : No further relevant information available.
· Precautions for safe handling
-Ensure good ventilation/exhaustion at the workplace.
-Development and deposition of dust has to be avoided.
· Information about protection against explosions and fires:
-Keep ignition sources away
-Do not smoke.
-Protect against electrostatic charges.
-Dust can combine with air to form an explosive mixture.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles : Store only in the original receptacle.
· Information about storage in one common storage facility:
-Do not store together with strong acids, alkalines and oxidation agents
-Store away from metals.
-Do not store together with metal salts
· Further information about storage conditions:
-Store in cool, dry conditions in well sealed receptacles.
-Store receptacle in a well ventilated area.
-This product is hygroscopic.
-Protect from humidity and water.
· Recommended storage temperature: at 15 °C to 25 °C
· Specific end use(s) : No further relevant information available.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Void
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Void
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Void
Shipping information
- Proper shipping name and description:
- Void
- Chemical name:
- 2-Pyridinecarboxaldehyde, oxime
- Labels:
- Void
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Void
Shipping information
- Proper shipping name and description:
- Void
- Chemical name:
- 2-Pyridinecarboxaldehyde, oxime
- Labels:
- Void
Remarksopen allclose all
Additional transport information
Additional information
- Special provisions / remarks / other:
- Not dangerous according to the above specifications
Exposure controls / personal protection
· Additional information about design of technical systems:
-Take appropriate measures against dust.
· Control parameters
· Components with limit values that require monitoring at the workplace : Not required.
· Additional information: The lists that were valid during the creation were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
-Do not inhale gases / fumes / dust / aerosols.
-Immediately remove all soiled and contaminated clothing.
-Avoid contact with the eyes and skin.
· Breathing equipment:
-Use suitable respiratory protective device in case of insufficient ventilation.
-In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
· Recommended filter device for short term use : Filter FFP2
· Protection of hands : Protective gloves
· Material of gloves : Nitrile rubber, NBR
Recommended material strength : ≥ 0.11 mm
· Penetration time of glove material : Penetration time ≥ 8 h
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Not suitable are gloves made of the following materials : Leather gloves, Strong gloves
· Eye protection : Safety glasses
-Take appropriate measures against dust.
· Control parameters
· Components with limit values that require monitoring at the workplace : Not required.
· Additional information: The lists that were valid during the creation were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
-Do not inhale gases / fumes / dust / aerosols.
-Immediately remove all soiled and contaminated clothing.
-Avoid contact with the eyes and skin.
· Breathing equipment:
-Use suitable respiratory protective device in case of insufficient ventilation.
-In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
· Recommended filter device for short term use : Filter FFP2
· Protection of hands : Protective gloves
· Material of gloves : Nitrile rubber, NBR
Recommended material strength : ≥ 0.11 mm
· Penetration time of glove material : Penetration time ≥ 8 h
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Not suitable are gloves made of the following materials : Leather gloves, Strong gloves
· Eye protection : Safety glasses
Stability and reactivity
· Reactivity
· Chemical stability
· Thermal decomposition / conditions to be avoided : No decomposition if used according to specifications.
· Possibility of hazardous reactions
-Reacts with acids, alkalis and oxidizing agents.
-Forms coloured complex compounds with salts of heavy metals.
· Conditions to avoid : No further relevant information available.
· Incompatible materials : No further relevant information available.
· Hazardous decomposition products:
-Nitrogen oxides (NOx)
-Hydrogen cyanide (prussic acid)
-Carbon monoxide and carbon dioxide
-Danger of toxic pyrolysis products.
· Chemical stability
· Thermal decomposition / conditions to be avoided : No decomposition if used according to specifications.
· Possibility of hazardous reactions
-Reacts with acids, alkalis and oxidizing agents.
-Forms coloured complex compounds with salts of heavy metals.
· Conditions to avoid : No further relevant information available.
· Incompatible materials : No further relevant information available.
· Hazardous decomposition products:
-Nitrogen oxides (NOx)
-Hydrogen cyanide (prussic acid)
-Carbon monoxide and carbon dioxide
-Danger of toxic pyrolysis products.
Disposal considerations
· Waste treatment methods
· Recommendation : Disposal considering to the local / regional / national / international regulations. Details have to be arranged with the authority concerned and / or the local waste management enterprise.
· Uncleaned packagings:
· Recommendation : Packagings that cannot be cleansed are to be disposed of in the same manner as the product.
· Recommendation : Disposal considering to the local / regional / national / international regulations. Details have to be arranged with the authority concerned and / or the local waste management enterprise.
· Uncleaned packagings:
· Recommendation : Packagings that cannot be cleansed are to be disposed of in the same manner as the product.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
