Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General information

Seek medical assistance if discomfort continues

After inhalation

Remove the casualty into fresh air and keep him calm.

After contact with skin

In case of contact with skin, clean with soap and water.

After contact with eyes

Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.

After ingestion

If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Most important symptoms and effects, both acute and delayed

Symptoms

No symptoms known currently.

Indication of any immediate medical attention and special treatment needed

Treatment

Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media

water spray jet

alcohol-resistant foam

Extinguishing media that must not be used for safety reasons

Full water jet

carbon dioxide

dry powder

Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

Carbon dioxide (CO2)

Nitrogen oxides (NOx)

Hydrogen chloride (HCl)

Advice for firefighters

Special protective equipment for firefighting

Use self-contained breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Avoid contact with skin and eyes.

Wear suitable personal protective equipment.

Keep away sources of ignition.

Environmental precautions

Do not allow entry to drains,water courses or soil

Methods and material for containment and cleaning up

Take up mechanically

Dispose of absorbed material in accordance with the regulations.

Avoid dust formation and electrical charging (sparking) because dust explosion might occur.

When picked up, treat material as prescribed under heading "Disposal".

Reference to other sections

Additional information

Information regarding Safe handling, see chapter Handling and Storage.

Handling and storage

Precautions for safe handling

Advice on safe handling

When used and handled appropriately no special measures are needed

Avoid dust formation.

Hygiene measures

Wash hands before breaks and after work.

Use barrier skin cream.

Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Advice on protection against fire and explosion

Take precautionary measures against build-up of electrostatic charges, e.g  earthing during loading and off-loading operations.

Keep away from sources of ignition

Dust can form an explosive mixture with air.

Conditions for safe storage, including any incompatibilities

Further information on storage conditions

Keep container tightly closed

Keep away from sources of ignition.

Specific end use(s)

No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International Bulk Chemicals Code)
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Control parameters

Exposure limit values

Exposure limit values are not available.

DNEL/DMEL values

DNEL/DMEL values are not available.

PNEC values

PNEC values are not available.

Exposure controls

General protective measures

Observe the usual precautions for handling chemicals.

Respiratory protection :       Wear dust mask when handling large quantities

Hand protection :       Nitrile rubber gloves.

Minimum breakthrough time (glove): not determined

Minimum thickness (glove): not determined

Observe the information of the glove manufacturers on permeability and breakthrough times and other workplace requirements

Eye protection :       safety glasses

Body protection :       working clothes

Stability and reactivity

Reactivity

See section  "Possibility of hazardous reactions"

Chemical stability

Under normal conditions the product is stable.

Possibility of hazardous reactions

When handled and stored appropriately no dangerous reactions are known

Conditions to avoid

None known.

Incompatible materials

not known

Hazardous decomposition products

When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods

Product

Product should be be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste