Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-798-8 | CAS number: 99-89-8
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General advice : Move out of dangerous area.
Consult a physician.
Show the SDS data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled : Move to fresh air.
If unconscious place in recovery position and seek medical advice.
If symptoms persist, call a physician.
In case of skin contact : Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact: Remove contact lenses.
Immediately flush eye(s) for at least 15 minutes. Get medical attention.
If swallowed : Keep respiratory tract clear.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Take victim immediately to hospital.
Consult a physician.
Show the SDS data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled : Move to fresh air.
If unconscious place in recovery position and seek medical advice.
If symptoms persist, call a physician.
In case of skin contact : Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact: Remove contact lenses.
Immediately flush eye(s) for at least 15 minutes. Get medical attention.
If swallowed : Keep respiratory tract clear.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Take victim immediately to hospital.
Fire-fighting measures
Extinguishing media:
Suitable extinguishing media:
Dry chemical
Alcohol-resistant foam
Carbon dioxide (CO2)
Water spray
Unsuitable extinguishing media: No data available.
Special hazards arising from the substance or mixture
Specific hazards during firefighting: Do not allow run-off from fire fighting to enter drains or water courses.
Advice for firefighters
Special protective equipment for firefighters: Wear self contained breathing apparatus for fire fighting if necessary.
Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Suitable extinguishing media:
Dry chemical
Alcohol-resistant foam
Carbon dioxide (CO2)
Water spray
Unsuitable extinguishing media: No data available.
Special hazards arising from the substance or mixture
Specific hazards during firefighting: Do not allow run-off from fire fighting to enter drains or water courses.
Advice for firefighters
Special protective equipment for firefighters: Wear self contained breathing apparatus for fire fighting if necessary.
Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions: no data available
Environmental precautions
Environmental precautions: Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and materials for containment and cleaning up
Methods for cleaning up : Keep in suitable, closed containers for disposal.
Personal precautions: no data available
Environmental precautions
Environmental precautions: Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and materials for containment and cleaning up
Methods for cleaning up : Keep in suitable, closed containers for disposal.
Handling and storage
Precautions for safe handling
Advice on safe handling: Avoid formation of respirable particles.
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8 of SDS.
Smoking, eating and drinking should be prohibited in the application area.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion: Avoid dust formation.
Provide appropriate exhaust ventilation at places where dust is formed.
Temperature class: no data available
Fire-fighting class: no data available
Dust explosion class: no data available
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers: Keep container tightly closed in a dry and well-ventilated place.
Electrical installations / working materials must comply with the technological safety standards.
Further information on storage conditions: Ambient / 10-30°C (50-85°F)
Dry, well ventilated, preferably full, hermetically sealed.
Advice on common storage : Protect against light.
German storage class: no data available
Other data: No decomposition if stored and applied as directed.
Advice on safe handling: Avoid formation of respirable particles.
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8 of SDS.
Smoking, eating and drinking should be prohibited in the application area.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion: Avoid dust formation.
Provide appropriate exhaust ventilation at places where dust is formed.
Temperature class: no data available
Fire-fighting class: no data available
Dust explosion class: no data available
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers: Keep container tightly closed in a dry and well-ventilated place.
Electrical installations / working materials must comply with the technological safety standards.
Further information on storage conditions: Ambient / 10-30°C (50-85°F)
Dry, well ventilated, preferably full, hermetically sealed.
Advice on common storage : Protect against light.
German storage class: no data available
Other data: No decomposition if stored and applied as directed.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN 2430
Shipping information
- Proper shipping name and description:
- ALKYLPHENOLS, SOLID, N.O.S.
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN 2430
Shipping information
- Proper shipping name and description:
- ALKYLPHENOLS, SOLID, N.O.S.
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN 2430
Shipping information
- Proper shipping name and description:
- Alkylphenols, solid, n.o.s.
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Contains no substances with occupational exposure limit values.
Exposure controls
Personal protective equipment
Respiratory protection: Use only in well-ventilated areas.
In case a risk analysis proved the cartridge respirator as acceptable, use type: ABEK-P3 (EN 14387) respirator cartridges as a backup to engineering controls.
In absence of engineering controls, use self-contained breathing apparatus or full face supplied air respirators.
Use respirators and components tested and approved under appropriate government standards such as CEN (EU).
Hand protection: Use gloves when handling substance in open systems.
Inspect gloves prior to use. Train operators for proper use.
If only incidental exposure is expected: (work without direct contact to substance) use gloves tested according EN 16523-1 breakthrough times at least 10 minutes, tested for chemicals indicated in chapter 3 of this SDS. Change gloves frequently.
If direct skin contact is expected: use gloves tested according to EN 16523-1, tested for chemicals indicated in chapter 3 of this SDS. Permeation time must exceed contact time.
Eye protection: Use safety glasses and faceshield tested according to EN166.
Skin and body protection: Wear working clothes covering arms and legs.
The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Use apron or complete chemical suit if exposure is expected.
Hygiene measures: Do not eat, drink or smoke during work.
Wash and dry hands after finished working.
Protective measures: Exposure assessment: Exposure is dependent on the product being handled, the potential for chemical release, and any resulting airborne concentrations or dermal contact. Since product handling and release scenarios vary, and no two workplaces are exactly alike, it is recommended that the potential for exposure be assessed prior to the product’s use or introduction. Exposure assessments should be performed
by an occupational hygienist, industrial hygienist, or other qualified occupational or environmental health professional.
An exposure assessment should be conducted to determine the efficacy of any ventilation and the need for additional respiratory protection.
PPE is always the last resort to avoid exposure. In any case technical and organisational measures have to be explored and used prior to the selection of PPE. The PPE selection is for operators trained to work with chemicals according to good industrial hygiene and safety practice. Operators have to be trained and used to PPE handling.
Environmental exposure controls
General advice: Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Contains no substances with occupational exposure limit values.
Exposure controls
Personal protective equipment
Respiratory protection: Use only in well-ventilated areas.
In case a risk analysis proved the cartridge respirator as acceptable, use type: ABEK-P3 (EN 14387) respirator cartridges as a backup to engineering controls.
In absence of engineering controls, use self-contained breathing apparatus or full face supplied air respirators.
Use respirators and components tested and approved under appropriate government standards such as CEN (EU).
Hand protection: Use gloves when handling substance in open systems.
Inspect gloves prior to use. Train operators for proper use.
If only incidental exposure is expected: (work without direct contact to substance) use gloves tested according EN 16523-1 breakthrough times at least 10 minutes, tested for chemicals indicated in chapter 3 of this SDS. Change gloves frequently.
If direct skin contact is expected: use gloves tested according to EN 16523-1, tested for chemicals indicated in chapter 3 of this SDS. Permeation time must exceed contact time.
Eye protection: Use safety glasses and faceshield tested according to EN166.
Skin and body protection: Wear working clothes covering arms and legs.
The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Use apron or complete chemical suit if exposure is expected.
Hygiene measures: Do not eat, drink or smoke during work.
Wash and dry hands after finished working.
Protective measures: Exposure assessment: Exposure is dependent on the product being handled, the potential for chemical release, and any resulting airborne concentrations or dermal contact. Since product handling and release scenarios vary, and no two workplaces are exactly alike, it is recommended that the potential for exposure be assessed prior to the product’s use or introduction. Exposure assessments should be performed
by an occupational hygienist, industrial hygienist, or other qualified occupational or environmental health professional.
An exposure assessment should be conducted to determine the efficacy of any ventilation and the need for additional respiratory protection.
PPE is always the last resort to avoid exposure. In any case technical and organisational measures have to be explored and used prior to the selection of PPE. The PPE selection is for operators trained to work with chemicals according to good industrial hygiene and safety practice. Operators have to be trained and used to PPE handling.
Environmental exposure controls
General advice: Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Stability and reactivity
Reactivity: none
Chemical stability
The product is chemically stable.
Possibility of hazardous reactions
Hazardous reactions: No decomposition if stored and applied as directed.
Conditions to avoid
Conditions to avoid: no data available
Incompatible materials
Materials to avoid : no data available
Hazardous decomposition products
Hazardous decomposition products: no data available
Thermal decomposition: no data available
Chemical stability
The product is chemically stable.
Possibility of hazardous reactions
Hazardous reactions: No decomposition if stored and applied as directed.
Conditions to avoid
Conditions to avoid: no data available
Incompatible materials
Materials to avoid : no data available
Hazardous decomposition products
Hazardous decomposition products: no data available
Thermal decomposition: no data available
Disposal considerations
Waste treatment methods
Product: Do not dispose of waste into sewer.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Send to a licensed waste management company.
Contaminated packaging: Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
Dispose of in accordance with local regulations.
Product: Do not dispose of waste into sewer.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Send to a licensed waste management company.
Contaminated packaging: Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
Dispose of in accordance with local regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
