Skip to Content
Skip to Content

Dossier Evaluation status

Dossier Evaluation status

ECHA’s dossier evaluation process covers compliance checks and the examination of testing proposals. By consulting the table below, you can find out whether ECHA has started to evaluate dossiers for a particular substance and follow the progress through the evaluation process.

The table below displays the type, scope and status of the assessment undertaken for a given dossier. The decision date and the non-confidential version of the decision are published shortly after the decision has been adopted.

Before publishing the non-confidential version of an adopted decision on its website, ECHA consults the addressees of the decision on this version. ECHA systematically removes any personal data from the non-confidential version of a decision. Some sections may also be redacted based on justified claims by registrants, regarding information confidential or deemed to harm their commercial interest if disclosed.

Check the expandable boxes below for more details.

 

Content of the table

Identifiers of the substance: Name (as on the Dissemination website); EC/List number (European Community number / List number assigned by ECHA); CAS number (also called the Chemical Abstract Service Registry Number or CAS RN).

Decision type can be ‘CCH’ for Compliance Check Evaluation and ‘TPE’ for Testing Proposal Evaluation.

Scope refers to the scope of the evaluation and can be:

  • Targeted: The compliance check focuses only on some endpoints.
  • Comprehensive: The compliance check focuses on all relevant endpoints under ECHA’s strategy.
  • Testing proposal: The assessment focuses on the testing proposals submitted by the registrants.

Status reports the current position of the dossier in the dossier evaluation process and can be:

  • Under assessment: The evaluation of the dossier has formally started.
  • Ongoing: The registrants have received the draft decision - The dossier retains this status until the decision is adopted or the evaluation is otherwise concluded.
  • Information requested: The registrants have received the adopted decision with the deadline for providing the requested information.
  • Follow-up: The deadline set in the adopted decision has passed, and ECHA is assessing whether the information requested in the decision has been provided in the dossier update - This follow-up may also involve the national enforcement authorities.
  • Concluded: The evaluation is closed.
    In most cases, this means that the registrant has responded to the adopted decision with compliant information. However, as in some cases an evaluation is concluded at an earlier stage, an adopted decision is not always available for every evaluation marked as concluded.

Decision date reports the date on which the adopted decision was sent to the registrants.

Decision displays a non-confidential version of the adopted decision once available.

Latest update indicates the date of the latest automatic update carried out by ECHA’s information systems.

You can access the disseminated registration dossier, available in the ‘Registered substances’ section of ECHA’s website, by clicking on the magnifying glass icon. Except when confidentiality is claimed on the substance identifiers, the adopted decision is directly linked to the disseminated dossier.

You can access additional information in ‘Details’ view, by clicking on the eye icon:

  • Substance identifiers
  • Decision type (CCH or TPE), scope and status of the evaluation, as in the main table
  • Decision’s deadline(s): The deadline(s) for requested information contained in the decision, should the decision contain more than one deadline
  • Appeal information: If the registrants have appealed against the adopted decision, a link to the Board of Appeal’s announcement document is provided.

 

How to read the table

ECHA’s information systems automatically update the status of dossier evaluations during the process. For transparency reasons, all dossier evaluation decisions will remain published. This also applies if the registrants have appealed or have updated the registration dossier as requested in the decision.

It is for the reader to verify the status of an evaluation: check the deadline of the decision, the indicated status of the evaluation, and the content of the registration dossier. The most recent data on a substance is available in the ‘Registered substances’ section of ECHA’s website; check also whether the Board of Appeal has taken a decision regarding any appeal.

 

Important notes:

  • The dossier evaluation decisions may not apply to all registrants that are part of a joint registration.
  • There may be a delay between the decision date and the actual publication of the adopted decision, which corresponds to the consultation on its non-confidential version and addressing any comments from the registrants.
  • The information in the disseminated registration dossier is obtained from all registration dossiers which are part of the joint submission of a substance, including the names of the registrants, unless claimed confidential.
Last updated 25 February 2020. Database contains 3004 unique substances/entries.
Filter the list
Decision's deadline:
Decision date:

Decision    
200-579-1
64-18-6
CCH
Comprehensive
Concluded
13/10/2018
View
Details
200-580-7
64-19-7
CCH
Targeted
Concluded
13/10/2018
View
Details
200-580-7
64-19-7
CCH
Comprehensive
Concluded
13/10/2018
View
Details
229-146-5
6419-19-8
CCH
Comprehensive
Ongoing
04/07/2019
View
Details
229-146-5
6419-19-8
TPE
Testing Proposal
Ongoing
19/07/2019
View
Details
264-727-7
64194-22-5
TPE
Testing Proposal
Concluded
10/12/2018
View
Details
264-727-7
64194-22-5
CCH
Comprehensive
Concluded
27/03/2019
View
Details
264-731-9
64216-15-5
CCH
Comprehensive
Concluded
01/11/2018
View
Details
229-176-9
6422-86-2
CCH
Targeted
Concluded
13/10/2018
View
Details
264-848-5
64365-17-9
CCH
Targeted
Concluded
04/11/2011
04/10/2018
View
Details
264-848-5
64365-17-9
TPE
Testing Proposal
Follow-up
14/08/2014
04/10/2018
View
Details
264-848-5
64365-17-9
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
264-867-9
64396-12-9
CCH
Comprehensive
Under assessment
15/07/2019
View
Details
264-867-9
64396-12-9
TPE
Testing Proposal
Under assessment
13/10/2018
View
Details
613-584-2
64401-02-1
TPE
Testing Proposal
Concluded
25/10/2016
13/02/2019
View
Details
264-885-7
64417-98-7
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
211-463-5
646-06-0
CCH
Targeted
Under assessment
22/07/2019
View
Details
211-463-5
646-06-0
CCH
Comprehensive
Concluded
07/10/2014
30/11/2018
View
Details
211-471-9
646-25-3
TPE
Testing Proposal
Concluded
04/11/2014
13/10/2018
View
Details
613-645-3
646505-36-4
TPE
Testing Proposal
Concluded
11/03/2015
04/10/2018
View
Details
265-004-9
64665-57-2
TPE
Testing Proposal
Information requested
10/12/2018
16/01/2019
View
Details
A complex combination of hydrocarbons produced by distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C4 through C11 and boiling in the range of approximately minus 20°C to 220°C (-4°F to 428°F).
265-042-6
64741-42-0
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons produced by the distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-043-1
64741-43-1
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced by the distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-043-1
64741-43-1
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced by the distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C20 and boiling in the range of 205°C to 345°C (401°F to 653°F).
265-044-7
64741-44-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced by the distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C20 and boiling in the range of 205°C to 345°C (401°F to 653°F).
265-044-7
64741-44-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced as the lowest boiling stream in the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-049-4
64741-49-7
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced as the lowest boiling stream in the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-049-4
64741-49-7
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced by vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 100 SUS at 100°F (19cSt at 40°C). It contains a relatively large proportion of saturated aliphatic hydrocarbons.
265-052-0
64741-51-1
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons produced by a distillation of products from a catalytic cracking process. It consists of hydrocarbons having carbon numbers predominantly in the range of C6 through C12 and boiling in the range of approximately 65°C to 230°C (148°F to 446°F). It contains a relatively large proportion of unsaturated hydrocarbons.
265-055-7
64741-54-4
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex residuum from the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly greater than C34 and boiling above approximately 495°C (923°F).
265-057-8
64741-56-6
TPE
Testing Proposal
Under assessment
07/06/2019
View
Details
A complex residuum from the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly greater than C34 and boiling above approximately 495°C (923°F).
265-057-8
64741-56-6
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
A complex residuum from the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly greater than C34 and boiling above approximately 495°C (923°F).
265-057-8
64741-56-6
TPE
Testing Proposal
Concluded
19/02/2014
02/04/2019
View
Details
A complex combination of hydrocarbons produced by the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C13 through C30 and boiling in the range of approximately 230°C to 450°C (446°F to 842°F).
265-059-9
64741-58-8
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons produced by the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C13 through C30 and boiling in the range of approximately 230°C to 450°C (446°F to 842°F).
265-059-9
64741-58-8
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons produced by the distillation of products from a catalytic cracking process. It consists of hydrocarbons having carbon numbers predominantly in the range of C9 through C25 and boiling in the range of approximately 150°C to 400°C (302°F to 752°F). It contains a relatively large proportion of bicyclic aromatic hydrocarbons.
265-060-4
64741-59-9
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons produced from the distillation of products from a catalytic reforming process. It consists of hydrocarbons having carbon numbers predominantly in the range of C5 through C11 and boiling in the range of approximately 35°C to 190°C (95°F to 374°F). It contains a relatively large proportion of aromatic and branched chain hydrocarbons. This stream may contain 10 vol. % or more benzene.
265-065-1
64741-63-5
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons produced by distillation of the reaction products of isobutane with monoolefinic hydrocarbons usually ranging in carbon numbers from C3 through C5. It consists of predominantly branched chain saturated hydrocarbons having carbon numbers predominantly in the range of C7 through C12 and boiling in the range of approximately 90°C to 220°C (194°F to 428°F).
265-066-7
64741-64-6
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
921-728-3
64741-66-8
CCH
Targeted
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons from distillation of the products from a hydrocracking process. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly in the range of C10 through C18, and boiling in the range of approximately 160°C to 320°C (320°F to 608°F).
265-078-2
64741-77-1
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons from the distillation of the products from a thermal cracking process. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly in the range of C10 through C22 and boiling in the range of approximately 160°C to 370°C (320°F to 698°F).
265-084-5
64741-82-8
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons from distillation of the products from a thermal cracking process. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly in the range of C6 through C12 and boiling in the range of approximately 65°C to 220°C (148°F to 428°F).
265-085-0
64741-83-9
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons obtained by subjecting a petroleum distillate to a sweetening process to convert mercaptans or to remove acidic impurities. It consists of hydrocarbons having carbon numbers predominantly in the range of C9 through C20 and boiling in the range of approximately 150°C to 345°C (302°F to 653°F).
265-088-7
64741-86-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons obtained by subjecting a petroleum distillate to a sweetening process to convert mercaptans or to remove acidic impurities. It consists of hydrocarbons having carbon numbers predominantly in the range of C9 through C20 and boiling in the range of approximately 150°C to 345°C (302°F to 653°F).
265-088-7
64741-86-2
CCH
Targeted
Concluded
14/10/2018
View
Details
A complex combination of hydrocarbons obtained as the extract from a solvent extraction process. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C50. This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
265-103-7
64742-04-7
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons obtained as the extract from a solvent extraction process. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly higher than C25.
265-110-5
64742-10-5
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
A complex combination of hydrocarbons obtained as the extract from a solvent extraction process. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly higher than C25.
265-110-5
64742-10-5
TPE
Testing Proposal
Ongoing
10/07/2019
View
Details
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-148-2
64742-46-7
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-148-2
64742-46-7
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-148-2
64742-46-7
TPE
Testing Proposal
Under assessment
13/02/2019
View
Details
919-857-5
64742-48-9
CCH
Targeted
Concluded
01/08/2011
03/12/2018
View
Details
919-857-5
64742-48-9
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
919-857-5
64742-48-9
CCH
Targeted
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C6 through C13 and boiling in the range of approximately 65°C to 230°C (149°F to 446°F).
265-150-3
64742-48-9
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons obtained by treating an atmospheric tower residuum with hydrogen in the presence of a catalyst under conditions primarily to remove organic sulfur compounds. It consists of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350°C (662°F). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
265-181-2
64742-78-5
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons obtained from a petroleum stock by treating with hydrogen to convert organic sulfur to hydrogen sulfide which is removed. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C13 through C25 and boiling in the range of approximately 230°C to 400°C (446°F to 752°F).
265-182-8
64742-79-6
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons obtained from a petroleum stock by treating with hydrogen to convert organic sulfur to hydrogen sulfide which is removed. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C13 through C25 and boiling in the range of approximately 230°C to 400°C (446°F to 752°F).
265-182-8
64742-79-6
TPE
Testing Proposal
Under assessment
13/02/2019
View
Details
A complex combination of hydrocarbons obtained from a petroleum stock by treating with hydrogen to convert organic sulfur to hydrogen sulfide which is removed. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-183-3
64742-80-9
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons obtained from a petroleum stock by treating with hydrogen to convert organic sulfur to hydrogen sulfide which is removed. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
265-183-3
64742-80-9
TPE
Testing Proposal
Under assessment
13/02/2019
View
Details
A complex combination of hydrocarbons obtained by treating a vacuum residuum with hydrogen in the presence of a catalyst under conditions primarily to remove organic sulfur compounds. It consists of hydrocarbons having carbon numbers predominantly greater than C34 and boiling approximately above 495°C (923°F).
265-188-0
64742-85-4
TPE
Testing Proposal
Concluded
19/12/2016
02/04/2019
View
Details
A complex combination of hydrocarbons obtained from a catalytic hydrodesulfurization process. It consists of hydrocarbons having carbon numbers predominantly in the range of C13 through C30 and boiling in the range of approximately 230°C to 450°C (446°F to 842°F).
265-190-1
64742-87-6
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex black solid obtained by blowing air through a heated residuum, or raffinate from a deasphalting process with or without a catalyst. The process is principally one of oxidative condensation which increases the molecular weight.
265-196-4
64742-93-4
TPE
Testing Proposal
Under assessment
07/06/2019
View
Details
A complex black solid obtained by blowing air through a heated residuum, or raffinate from a deasphalting process with or without a catalyst. The process is principally one of oxidative condensation which increases the molecular weight.
265-196-4
64742-93-4
TPE
Testing Proposal
Concluded
19/02/2014
26/08/2019
View
Details
A complex black solid obtained by blowing air through a heated residuum, or raffinate from a deasphalting process with or without a catalyst. The process is principally one of oxidative condensation which increases the molecular weight.
265-196-4
64742-93-4
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
A complex combination of hydrocarbons obtained from distillation of aromatic streams. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C9 through C16 and boiling in the range of approximately 165°C to 290°C (330°F to 554°F).
265-198-5
64742-94-5
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A complex combination of hydrocarbons obtained from distillation of aromatic streams. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C9 through C16 and boiling in the range of approximately 165°C to 290°C (330°F to 554°F).
265-198-5
64742-94-5
CCH
Targeted
Concluded
14/10/2018
View
Details
A complex combination of hydrocarbons obtained from distillation of aromatic streams. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C9 through C16 and boiling in the range of approximately 165°C to 290°C (330°F to 554°F).
265-198-5
64742-94-5
TPE
Testing Proposal
Under assessment
11/09/2019
View
Details
A complex combination of hydrocarbons obtained from distillation of aromatic streams. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C9 through C16 and boiling in the range of approximately 165°C to 290°C (330°F to 554°F).
265-198-5
64742-94-5
TPE
Testing Proposal
Under assessment
03/02/2020
View
Details
A complex combination of hydrocarbons obtained from the distillation of crude oil or natural gasoline. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly in the range of C11 through C16 and boiling in the range of approximately 190°C to 290°C (374°F to 554°F).
265-200-4
64742-96-7
CCH
Targeted
Concluded
18/08/2014
04/10/2018
View
Details
A combination of normal paraffins having carbon numbers predominantly greater than C10 obtained by urea adduction or molecular sieve processes.
265-232-9
64771-71-7
CCH
Targeted
Concluded
18/04/2013
04/10/2018
View
Details
A combination of normal paraffins having carbon numbers predominantly greater than C10 obtained by urea adduction or molecular sieve processes.
265-232-9
64771-71-7
TPE
Testing Proposal
Concluded
20/12/2018
View
Details
229-347-8
6484-52-2
CCH
Targeted
Concluded
29/01/2013
04/10/2018
View
Details
229-347-8
6484-52-2
CCH
Targeted
Concluded
13/10/2018
View
Details
229-352-5
6485-40-1
CCH
Comprehensive
Concluded
21/07/2017
06/02/2019
View
Details
200-606-7
65-30-5
CCH
Targeted
Ongoing
14/11/2019
View
Details
200-618-2
65-85-0
CCH
Targeted
Concluded
24/06/2014
04/10/2018
View
Details
200-618-2
65-85-0
CCH
Targeted
Concluded
13/10/2018
View
Details
200-618-2
65-85-0
CCH
Comprehensive
Concluded
13/10/2018
View
Details
211-479-2
650-51-1
TPE
Testing Proposal
Concluded
22/07/2013
04/10/2018
View
Details
265-449-9
65113-55-5
TPE
Testing Proposal
Concluded
30/10/2018
View
Details
265-449-9
65113-55-5
TPE
Testing Proposal
Concluded
16/03/2015
04/10/2018
View
Details
265-449-9
65113-55-5
CCH
Comprehensive
Under assessment
14/02/2020
View
Details
265-633-9
65212-76-2
CCH
Comprehensive
Concluded
09/08/2019
View
Details
265-634-4
65212-77-3
CCH
Comprehensive
Ongoing
15/01/2020
View
Details
695-748-3
65286-55-7
TPE
Testing Proposal
Under assessment
28/01/2020
View
Details
229-440-3
6535-46-2
CCH
Targeted
Concluded
07/06/2013
04/10/2018
View
Details
229-440-3
6535-46-2
CCH
Comprehensive
Information requested
09/04/2018
10/01/2019
View
Details
265-745-8
65405-77-8
CCH
Comprehensive
Information requested
15/11/2018
18/12/2018
View
Details
211-519-9
657-27-2
CCH
Targeted
Concluded
13/10/2018
View
Details
211-522-5
657-84-1
CCH
Comprehensive
Information requested
10/12/2019
12/12/2019
View
Details
211-522-5
657-84-1
TPE
Testing Proposal
Information requested
10/12/2019
28/01/2020
View
Details
211-522-5
657-84-1
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
613-848-7
65870-94-2
CCH
Comprehensive
Concluded
13/10/2018
View
Details
634-657-5
65962-45-0
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
The fused substance formed by the action of a flux upon the gangue of the iron-bearing materials charged to a blast furnace and upon the oxidized impurities in the iron produced. Depending upon the particular blast furnace operation, the slag is composed primarily of sulfur and oxides of aluminum, calcium, magnesium, and silicon.
266-002-0
65996-69-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
The fused substance formed by the action of a flux upon the gangue of the iron-bearing materials charged to a blast furnace and upon the oxidized impurities in the iron produced. Depending upon the particular blast furnace operation, the slag is composed primarily of sulfur and oxides of aluminum, calcium, magnesium, and silicon.
266-002-0
65996-69-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
The fused substance formed by the action of a flux upon the gangue of iron-bearing materials charged to a steelmaking furnace and upon the oxidized impurities in the steel produced. Depending upon the particular steelmaking operation, the slag is composed primarily of sulfur and oxides of aluminum, calcium, iron, magnesium, manganese, phosphorus, and silicon.
266-004-1
65996-71-6
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
The dust generated during the charging, operation, and tapping of a steelmaking furnace and from steel conditioning, including that which is recovered through the use of pollution abatement equipment. Composed primarily of iron oxides. May contain varying amounts of other metallic oxides and trace compounds.
266-005-7
65996-72-7
TPE
Testing Proposal
Concluded
04/07/2012
04/10/2018
View
Details
The wetted particulate matter recovered by wet collection techniques, including pollution abatement equipment, for the recovery of materials such as iron sinter dust, blast furnace dust, steelmaking dust, and mill scale.
266-006-2
65996-73-8
CCH
Targeted
Concluded
27/11/2015
24/06/2019
View
Details
The wetted particulate matter recovered by wet collection techniques, including pollution abatement equipment, for the recovery of materials such as iron sinter dust, blast furnace dust, steelmaking dust, and mill scale.
266-006-2
65996-73-8
TPE
Testing Proposal
Concluded
31/10/2012
04/10/2018
View
Details
The distillate from either high temperature coal tar, coke oven light oil, or coal tar oil alkaline extract residue having an approximate distillation range of 130°C to 210°C (266°F to 410°F) Composed primarily of indene and other polycyclic ring systems containing a single aromatic ring. May contain phenolic compounds and aromatic nitrogen bases.
266-013-0
65996-79-4
CCH
Targeted
Concluded
13/10/2018
View
Details
The distillate from either high temperature coal tar, coke oven light oil, or coal tar oil alkaline extract residue having an approximate distillation range of 130°C to 210°C (266°F to 410°F) Composed primarily of indene and other polycyclic ring systems containing a single aromatic ring. May contain phenolic compounds and aromatic nitrogen bases.
266-013-0
65996-79-4
TPE
Testing Proposal
Under assessment
06/11/2019
View
Details
266-037-1
65997-01-5
CCH
Comprehensive
Concluded
13/10/2018
View
Details
The low boiling fraction obtained by the distillation of tall oil. Contains fatty acids such as palmitic, stearic, oleic and linoleic as well as neutral materials.
266-039-2
65997-03-7
CCH
Targeted
Concluded
13/10/2018
View
Details
266-040-8
65997-04-8
TPE
Testing Proposal
Follow-up
14/08/2014
04/10/2018
View
Details
266-040-8
65997-04-8
CCH
Targeted
Concluded
04/11/2011
04/10/2018
View
Details
266-040-8
65997-04-8
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
266-040-8
65997-04-8
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
266-040-8
65997-04-8
TPE
Testing Proposal
Under assessment
13/10/2018
View
Details
500-163-2
65997-05-9
TPE
Testing Proposal
Follow-up
14/08/2014
04/10/2018
View
Details
266-041-3
65997-06-0
TPE
Testing Proposal
Follow-up
14/08/2014
04/10/2018
View
Details
266-041-3
65997-06-0
CCH
Targeted
Concluded
04/11/2011
04/10/2018
View
Details
266-041-3
65997-06-0
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
613-868-6
65997-12-8
TPE
Testing Proposal
Follow-up
14/08/2014
04/10/2018
View
Details
266-042-9
65997-13-9
TPE
Testing Proposal
Follow-up
14/08/2014
04/10/2018
View
Details
266-042-9
65997-13-9
CCH
Targeted
Concluded
04/11/2011
04/10/2018
View
Details
266-042-9
65997-13-9
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
Frit is a mixture of inorganic chemical substances produced by rapidly quenching a molten, complex combination of materials, confining the chemical substances thus manufactured as nonmigratory components of glassy solid flakes or granules. This category includes all of the chemical substances specified below when they are intentionally manufactured in the production of frit. The primary members of this category are oxides of some or all of the elements listed below. Fluorides of these elements may also be included in combination with these primary substances.@Aluminum@Manganese@Antimony@Molybdenum@Arsenic@Neodymium@Barium@Nickel@Bismuth@Niobium@Boron@Phosphorus@Cadmium@Potassium@Calcium@Silicon@Cerium@Silver@Chromium@Sodium@Cobalt@Strontium@Copper@Tin@Gold@Titanium@Iron@Tungsten@Lanthanum@Vanadium@Lead@Zinc@Lithium@Zirconium@Magnesium
266-047-6
65997-18-4
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
200-624-5
66-25-1
TPE
Testing Proposal
Information requested
11/12/2019
13/12/2019
View
Details
229-542-8
6600-31-3
TPE
Testing Proposal
Concluded
04/06/2015
04/10/2018
View
Details
Substance obtained by the partial removal of water from the liquid resulting from steeping corn in a water and sulphur dioxide solution which is allowed to ferment by the action of naturally occurring lactic acid-producing microorganisms.
266-113-4
66071-94-1
CCH
Targeted
Concluded
13/10/2018
View
Details
Substance obtained by the partial removal of water from the liquid resulting from steeping corn in a water and sulphur dioxide solution which is allowed to ferment by the action of naturally occurring lactic acid-producing microorganisms.
266-113-4
66071-94-1
CCH
Targeted
Concluded
13/10/2018
View
Details
Substance obtained by the partial removal of water from the liquid resulting from steeping corn in a water and sulphur dioxide solution which is allowed to ferment by the action of naturally occurring lactic acid-producing microorganisms.
266-113-4
66071-94-1
CCH
Targeted
Concluded
13/10/2018
View
Details
211-546-6
661-19-8
CCH
Targeted
Concluded
13/10/2018
View
Details
229-563-2
6610-29-3
TPE
Testing Proposal
Follow-up
10/09/2015
04/10/2018
View
Details
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 53185.
266-273-5
66241-11-0
CCH
Targeted
Concluded
28/08/2014
08/01/2019
View
Details
This category encompasses the various chemical substances manufactured in the production of ceramics. For purposes of this category, a ceramic is defined as a crystalline or partially crystalline, inorganic, non-metallic, usually opaque substance consisting principally of combinations of inorganic oxides of aluminum, calcium, chromium, iron, magnesium, silicon, titanium, or zirconium which conventionally is formed first by fusion or sintering at very high temperatures, then by cooling, generally resulting in a rigid, brittle monophase or multiphase structure. (Those ceramics which are produced by heating inorganic glass, thereby changing its physical structure from amorphous to crystalline but not its chemical identity are not included in this definition.) This category consists of chemical substances other than by-products or impurities which are formed during the production of various ceramics and concurrently incorporated into a ceramic mixture. Its composition may contain any one or a combination of these substances. Trace amounts of oxides and other substances may be present. The following representative elements are principally present as oxides but may also be present as borides, carbides, chlorides, fluorides, nitrides, silicides, or sulfides in multiple oxidation states, or in more complex compounds.@Aluminum@Lithium@Barium@Magnesium@Beryllium@Manganese@Boron@Phosphorus@Cadmium@Potassium@Calcium@Silicon@Carbon@Sodium@Cerium@Thorium@Cesium@Tin@Chromium@Titanium@Cobalt@Uranium@Copper@Yttrium@Hafnium@Zinc@Iron@Zirconium
266-340-9
66402-68-4
CCH
Targeted
Concluded
13/10/2018
View
Details
This category encompasses the various chemical substances manufactured in the production of ceramics. For purposes of this category, a ceramic is defined as a crystalline or partially crystalline, inorganic, non-metallic, usually opaque substance consisting principally of combinations of inorganic oxides of aluminum, calcium, chromium, iron, magnesium, silicon, titanium, or zirconium which conventionally is formed first by fusion or sintering at very high temperatures, then by cooling, generally resulting in a rigid, brittle monophase or multiphase structure. (Those ceramics which are produced by heating inorganic glass, thereby changing its physical structure from amorphous to crystalline but not its chemical identity are not included in this definition.) This category consists of chemical substances other than by-products or impurities which are formed during the production of various ceramics and concurrently incorporated into a ceramic mixture. Its composition may contain any one or a combination of these substances. Trace amounts of oxides and other substances may be present. The following representative elements are principally present as oxides but may also be present as borides, carbides, chlorides, fluorides, nitrides, silicides, or sulfides in multiple oxidation states, or in more complex compounds.@Aluminum@Lithium@Barium@Magnesium@Beryllium@Manganese@Boron@Phosphorus@Cadmium@Potassium@Calcium@Silicon@Carbon@Sodium@Cerium@Thorium@Cesium@Tin@Chromium@Titanium@Cobalt@Uranium@Copper@Yttrium@Hafnium@Zinc@Iron@Zirconium
266-340-9
66402-68-4
CCH
Targeted
Concluded
13/10/2018
View
Details
This category encompasses the various chemical substances manufactured in the production of ceramics. For purposes of this category, a ceramic is defined as a crystalline or partially crystalline, inorganic, non-metallic, usually opaque substance consisting principally of combinations of inorganic oxides of aluminum, calcium, chromium, iron, magnesium, silicon, titanium, or zirconium which conventionally is formed first by fusion or sintering at very high temperatures, then by cooling, generally resulting in a rigid, brittle monophase or multiphase structure. (Those ceramics which are produced by heating inorganic glass, thereby changing its physical structure from amorphous to crystalline but not its chemical identity are not included in this definition.) This category consists of chemical substances other than by-products or impurities which are formed during the production of various ceramics and concurrently incorporated into a ceramic mixture. Its composition may contain any one or a combination of these substances. Trace amounts of oxides and other substances may be present. The following representative elements are principally present as oxides but may also be present as borides, carbides, chlorides, fluorides, nitrides, silicides, or sulfides in multiple oxidation states, or in more complex compounds.@Aluminum@Lithium@Barium@Magnesium@Beryllium@Manganese@Boron@Phosphorus@Cadmium@Potassium@Calcium@Silicon@Carbon@Sodium@Cerium@Thorium@Cesium@Tin@Chromium@Titanium@Cobalt@Uranium@Copper@Yttrium@Hafnium@Zinc@Iron@Zirconium
266-340-9
66402-68-4
CCH
Targeted
Concluded
03/06/2015
13/10/2018
View
Details
1 - 2.5 moles ethoxylated
500-165-3
66455-14-9
CCH
Comprehensive
Ongoing
21/12/2018
View
Details
266-367-6
66455-17-2
CCH
Targeted
Concluded
13/10/2018
View
Details
266-380-7
66492-51-1
TPE
Testing Proposal
Concluded
21/11/2014
04/10/2018
View
Details
266-380-7
66492-51-1
CCH
Comprehensive
Concluded
13/10/2018
View
Details
266-417-7
66587-56-2
CCH
Targeted
Concluded
13/10/2018
View
Details
266-417-7
66587-56-2
CCH
Targeted
Concluded
13/10/2018
View
Details
229-713-7
6674-22-2
TPE
Testing Proposal
Concluded
16/09/2015
04/10/2018
View
Details
229-722-6
6683-19-8
CCH
Targeted
Concluded
13/10/2018
View
Details
229-722-6
6683-19-8
CCH
Targeted
Concluded
13/10/2018
View
Details
229-722-6
6683-19-8
CCH
Comprehensive
Concluded
13/10/2018
View
Details
229-722-6
6683-19-8
TPE
Testing Proposal
Concluded
13/06/2012
04/10/2018
View
Details
200-655-4
67-48-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-655-4
67-48-1
CCH
Targeted
Concluded
14/10/2018
View
Details
200-657-5
67-51-6
CCH
Targeted
Follow-up
20/12/2016
04/07/2019
View
Details
200-657-5
67-51-6
CCH
Comprehensive
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-659-6
67-56-1
CCH
Targeted
Concluded
13/10/2018
View
Details
200-661-7
67-63-0
CCH
Targeted
Concluded
13/10/2018
View
Details
200-662-2
67-64-1
CCH
Comprehensive
Concluded
18/09/2013
04/10/2018
View
Details
200-664-3
67-68-5
CCH
Targeted
Concluded
13/10/2018
View
Details
200-665-9
67-71-0
CCH
Comprehensive
Concluded
21/11/2019
View
Details
447-010-5
670241-72-2
CCH
Comprehensive
Ongoing
04/12/2019
View
Details
266-564-7
67075-37-0
CCH
Comprehensive
Information requested
08/11/2019
11/11/2019
View
Details
229-764-5
6712-98-7
CCH
Comprehensive
Information requested
20/02/2019
08/05/2019
View
Details
266-582-5
67124-09-8
CCH
Comprehensive
Ongoing
24/06/2019
View
Details
266-582-5
67124-09-8
CCH
Targeted
Concluded
21/08/2019
View
Details
266-587-2
67151-63-7
CCH
Comprehensive
Concluded
01/03/2017
23/05/2019
View
Details
266-587-2
67151-63-7
CCH
Targeted
Ongoing
04/12/2019
View
Details
266-587-2
67151-63-7
TPE
Testing Proposal
Concluded
19/12/2014
04/10/2018
View
Details
229-782-3
6731-36-8
TPE
Testing Proposal
Under assessment
07/06/2019
View
Details
229-782-3
6731-36-8
CCH
Targeted
Under assessment
22/01/2020
View
Details
229-782-3
6731-36-8
TPE
Testing Proposal
Concluded
05/07/2012
04/10/2018
View
Details
229-782-3
6731-36-8
TPE
Testing Proposal
Concluded
20/09/2016
04/10/2018
View
Details
229-782-3
6731-36-8
CCH
Targeted
Concluded
13/10/2018
View
Details
700-040-5
674347-28-5
CCH
Comprehensive
Concluded
13/10/2018
View
Details
614-074-2
675106-31-7
CCH
Targeted
Concluded
13/10/2018
View
Details
266-733-5
67584-55-8
TPE
Testing Proposal
Concluded
20/05/2015
04/10/2018
View
Details
266-733-5
67584-55-8
CCH
Comprehensive
Concluded
13/10/2018
View
Details
266-840-7
67656-24-0
CCH
Comprehensive
Concluded
04/12/2019
View
Details
This substance is identified by SDA Substance Name: C12-C18 alkyl carboxylic acid and SDA Reporting Number: 16-005-00.
266-925-9
67701-01-3
CCH
Targeted
Concluded
25/11/2014
04/10/2018
View
Details
This substance is identified by SDA Substance Name: C14-C18 and C16-C18 unsaturated alkyl carboxylic acid and SDA Reporting Number: 04-005-00.
266-930-6
67701-06-8
CCH
Targeted
Concluded
13/10/2018
View
Details
This substance is identified by SDA Substance Name: C14-C18 and C16-C18 unsaturated alkyl carboxylic acid zinc salt and SDA Reporting Number: 04-006-09.
266-936-9
67701-12-6
CCH
Targeted
Concluded
20/08/2013
04/10/2018
View
Details
This substance is identified by SDA Substance Name: C12-C18 trialkyl glyceride and SDA Reporting Number: 16-001-00.
266-944-2
67701-26-2
CCH
Targeted
Concluded
13/10/2018
View
Details
This substance is identified by SDA Substance Name: C12-C18 trialkyl glyceride and SDA Reporting Number: 16-001-00.
266-944-2
67701-26-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
This substance is identified by SDA Substance Name: C14-C18 trialkyl glyceride and SDA Reporting Number: 17-001-00.
266-945-8
67701-27-3
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
614-114-9
67746-08-1
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
614-114-9
67746-08-1
CCH
Targeted
Concluded
20/04/2016
04/10/2018
View
Details
614-114-9
67746-08-1
CCH
Comprehensive
Concluded
13/10/2018
View
Details
This substance is identified by SDA Substance Name: C14-C18 and C16-C18 unsaturated alkyl carboxylic acid methyl ester and SDA Reporting Number: 04-010-00.
267-007-0
67762-26-9
CCH
Targeted
Concluded
13/10/2018
View
Details
This substance is identified by SDA Substance Name: C14-C18 and C16-C18 unsaturated alkyl carboxylic acid methyl ester and SDA Reporting Number: 04-010-00.
267-007-0
67762-26-9
CCH
Targeted
Concluded
09/12/2015
12/11/2018
View
Details
This substance is identified by SDA Substance Name: C16-C18 and C18 unsaturated alkyl carboxylic acid methyl ester and SDA Reporting Number: 11-010-00.
267-015-4
67762-38-3
CCH
Targeted
Concluded
13/10/2018
View
Details
267-022-2
67762-53-2
TPE
Testing Proposal
Concluded
13/10/2018
View
Details
267-023-8
67762-55-4
CCH
Targeted
Concluded
16/09/2019
View
Details
267-023-8
67762-55-4
CCH
Comprehensive
Ongoing
24/06/2019
View
Details
267-028-5
67762-63-4
TPE
Testing Proposal
Concluded
14/10/2018
View
Details
267-051-0
67774-74-7
CCH
Targeted
Concluded
13/10/2018
View
Details
267-051-0
67774-74-7
CCH
Targeted
Concluded
21/11/2018
View
Details
267-053-1
67784-78-5
TPE
Testing Proposal
Concluded
05/06/2013
04/10/2018
View
Details
267-053-1
67784-78-5
CCH
Targeted
Concluded
30/09/2015
04/10/2018
View
Details
267-053-1
67784-78-5
CCH
Targeted
Concluded
13/10/2018
View
Details
267-097-1
67786-25-8
CCH
Comprehensive
Under assessment
09/12/2019
View
Details
267-097-1
67786-25-8
CCH
Comprehensive
Concluded
13/10/2018
View
Details
267-097-1
67786-25-8
CCH
Comprehensive
Information requested
17/12/2018
23/02/2019
View
Details
267-097-1
67786-25-8
CCH
Targeted
Concluded
18/02/2020
View
Details
614-144-2
67800-94-6
CCH
Targeted
Concluded
13/10/2018
View
Details

Export search results to:

Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live2