Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

 

This page provides further information on the applications for authorisation or review reports, which have undergone public consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. The European Commission's decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

 
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted
0112-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAPOC GmbH & Co KG Use of sodium dichromate in molten bath form to modify surfaces, especially by blackening, of delicate medical products, specifically micro-surgical instruments Commission decided
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0124-01 Initial Sodium dichromate 234-190-3 10588-01-9 H&R Ölwerke Schindler GmbH;
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems, applied for the dewaxing and deoiling process steps of petroleum raffinate. Commission decided
0080-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 H&R Ölwerke Schindler GmbH
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Industrial use as a solvent and anti-solvent of the feedstock and intermediate product streams in the combined de-waxing and de-oiling of refining of petroleum vacuum distillates for the production of base oils and hard paraffin waxes Commission decided
0113-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing Commission decided
0081-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GRUPA LOTOS S.A. Use as an extraction solvent in the de-waxing of petroleum vacuum distillates and de-asphalted oil and de-oiling of slack wax for the production of base oils and paraffinic waxes. Commission decided
0003-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0003-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Pending decision
0021-01 Initial Trichloroethylene 201-167-4 79-01-6 Grupa Azoty S.A. Industrial use as a process chemical in caprolactam purification Commission decided
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Bolta Werke GmbH

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Opinions adopted
0062-02 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Opinions adopted
0062-01 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Formulation of mixtures of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Opinions adopted
0063-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Formulation of mixtures of sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films; and the electrolytic passivation of tin plated steel for the packaging industry. Opinions adopted
0063-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films. Opinions adopted
0063-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry. Opinions adopted
0082-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GE Healthcare Bio-Sciences AB Industrial use of 1,2-dichloroethane as an emulsifying solvent in the manufacture of porous particles for beaded chromatography and cell culture media. Commission decided
0172-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - GE Healthcare Bio-Sciences AB Industrial use of emulsifiers containing nonylphenols ethoxylated for the manufacture of chromatography resins used by the biopharmaceutical industry, food & beverage sector and academia Opinion development
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided
0070-02 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA
Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. Commission decided
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided
0083-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives Commission decided
0028-01 Initial Lead chromate 231-846-0 7758-97-6 Etienne LACROIX Industrial use of lead chromate in manufacture of pyrotechnical delay devices contained into ammunition for naval self-protection Commission decided
0037-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Ercros SA Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0017-01 Initial Trichloroethylene 201-167-4 79-01-6 ENTEK International Limited Trichloroethylene as an extraction solvent for removal of process oil and formation of the porous structure in polyethylene based separators used in lead-acid batteries Commission decided
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided
0077-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride Commission decided
0165-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Eli Lilly Kinsale Limited Industrial use of a 4-tert-octylphenol ethoxylate compound, as a patient safety viral inactivation reagent in the manufacture of human medicines produced from biological systems Opinion development
0036-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ELECTROQUÍMICA DE
HERNANI, S.A.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0128-01 Initial Chromium trioxide 215-607-8 1333-82-0 Doosan Electro-Materials
Luxembourg SARL
Doosan Energy Solution Kft
Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Opinions adopted
0020-01 Initial Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Commission decided
0140-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO in view of controlling the amount of non-specific reactions in the production of in-vitro diagnostic reagents (STA® - Liatest® D-Di assays). Opinion development
0140-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO for its detergent properties in the process of cell lysing for the production of in-vitro diagnostic reagents (Asserachrom® HPIA, Asserachrom® HPIA–IgG and Asserachrom® PF4 and STA®-Néoplastine® R15 assays). Opinion development
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0004-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Pending decision
0004-03 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Pending decision
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Industrial use of DBP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Commission decided
0148-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 DEZA a.s. Use of CTPht as a binder in the manufacture of clay targets Opinion development



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live1