Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

 

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. The European Commission's decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

 
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Bolta Werke GmbH

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Opinions adopted
0182-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Abbott Diagnostics GmbH Professional use as a surfactant in an onboard solution (Detergent B) as an accessory to In-Vitro Diagnostic Devices (IVDs) to wash the reagent probes, the mixers and the reaction cuvettes between tests to prevent interference with the test result on ARCHITECT and Alinity automated analyser systems. Opinion development
0167-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland
Abbott GmbH & Co. KG
Abbott Diagnostics GmbH
Professional use as a surfactant in the final use of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Opinion development
0168-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Diagnostics GmbH Professional use as a surfactant, in wash buffer components used in conjunction with Fluorescence In Situ Hybridisation (FISH) test kits and/or their Laboratory Developed Test (LDT) equivalents, in clinical diagnostic use for medical analysis of human tissue and blood samples to identify characteristic genetic abnormalities related to specific disease conditions. Opinion development
0012-12 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking Authorisation expired
0012-11 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking Authorisation expired
0167-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland Professional use of system solutions (Pre-Trigger and Trigger) in the final use of the In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. Opinion development
0012-06 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired
0012-05 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired
0105-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0095-04 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Opinions adopted
0032-05 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment (except passivation of tin-plated steel (ETP)) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Opinions adopted
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided
0032-04 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment for applications in the aeronautics and aerospace industries, unrelated to Functional chrome plating or Functional chrome plating with decorative character Opinions adopted
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Opinion development
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Commission decided
0111-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. Commission decided
0111-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. Commission decided
0109-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Akzo Nobel Chemicals SpA The use of 1,2-dichloroethane as recyclable solvent in the production of a polyacrylate surfactant Commission decided
0190-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Teva Baltics UAB The use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated (TritonX-100) as a nonionic surfactant for bacteria cells disruption and washing of inclusion bodies in Biological Drug Substance manufacturing process Opinion development
0164-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Swedish Orphan Biovitrum The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in manufacture of biopharmaceuticals by Swedish Orphan Biovitrum AB. Opinion development
0174-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Hospira Zagreb d.o.o., a Pfizer company The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of one biopharmaceutical protein, a biosimilar product, used to prevent infection and neutropenic fevers. Opinion development
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided
0146-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel UK Ltd The use of Chromium (VI) Trioxide for the manufacture of Electrolytic Chromium/Chromium oxide Coated Steel (ECCS) Opinion development
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided
0030-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Dometic GmbH
  • Dometic Hűtőgépgyártó és Kereskedelmi Zrt.
The use of sodium chromate as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75% by weight (Cr6+) in the cooling solution Commission decided
0104-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Borealis Plastomers B.V. The use of sodium dichromate as in-situ corrosion inhibitor in a closed water/ammonia absorption cooling system Commission decided
0031-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Boliden Mineral AB The use of sodium dichromate in copper/lead separation in concentrators handling complex sulphide ores Commission decided
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided
0017-01 Initial Trichloroethylene 201-167-4 79-01-6 ENTEK International Limited Trichloroethylene as an extraction solvent for removal of process oil and formation of the porous structure in polyethylene based separators used in lead-acid batteries Commission decided
0016-01 Initial Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries Commission decided
0108-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate Commission decided
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided
0022-01 Initial Trichloroethylene 201-167-4 79-01-6 SPOLANA a.s. Use as an extraction solvent in caprolactam production Commission decided
0129-01 Review report Trichloroethylene 201-167-4 79-01-6 SPOLANA s.r.o. [name of applicant in the original application: SPOLANA a.s. updated due to a notified change of corporate name] Use as an extraction solvent in caprolactam production Opinions adopted
0081-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GRUPA LOTOS S.A. Use as an extraction solvent in the de-waxing of petroleum vacuum distillates and de-asphalted oil and de-oiling of slack wax for the production of base oils and paraffinic waxes. Commission decided
0110-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Bayer Pharma AG Use as an industrial solvent in the manufacture of the high-grade pure final intermediate of Iopromide, the Active Pharmaceutical Ingredient for the X-ray contrast medium Ultravist® Commission decided
0108-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride Commission decided
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided
0176-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LFB BIOMEDICAMENTS Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. Opinion development
0178-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Baxter AG; Baxalta Belgium Manufacturing SA Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated (as a detergent) for virus inactivation via S/D (Solvent/Detergent) treatment in recombinant and plasma-derived medicinal products. Opinion development
0163-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in enhancement solutions and DELFIA standard and maintenance solutions as a critical ingredient for detection process while measuring europium (or other lanthanide) content in In Vitro Diagnostic assays and RUO products or during maintenance of instruments Opinion development
0139-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in two in vitro diagnostic VITROS® products used by professional diagnostic laboratories to detect antibodies to human hepatitis A virus and IgG antibodies to rubella virus. Opinions adopted
0162-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Novo Nordisk A/S Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as a solvent/detergent agent for virus inactivation in the manufacture of pharmaceutical products used in the treatment of rare bleeding disorders. Opinion development
0170-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as component of a chromatography column regeneration solution during the manufacture of a recombinant-derived Factor VIII Opinion development



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live2