Substance Information

NB: Registration status and tonnage

  • The REACH Registered substance portal was updated on 9th November 2020; the REACH registered factsheets were further updated on 21st December 2020. Details of the improvements can be found at Dissemination Platform Updates. Reprocessing the entire dataset is ongoing since 21 December 2020. ECHA is making all possible efforts to synchronise the registration status and tonnage with the shortest delay.
  • While reprocessing is ongoing please note that substances whose registration dossiers are not yet processed can incorrectly state in the Infocard that they are not registered under REACH. In these cases if there is a link to a REACH registered substance factsheet then the substance IS registered. The correct total tonnage band can be found in the factsheet(s) for the substance.

Calcium bis[4-[[1-[[(2-chlorophenyl)amino]carbonyl]-2-oxopropyl]azo]-3-nitrobenzenesulphonate]

EC / List no.: 276-057-2

CAS no.: 71832-85-4

Mol. formula: C16H13ClN4O7S.1/2Ca

formula

There is no harmonised classification and there are no notified hazards by manufacturers, importers or downstream users for this substance.

This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 100 to < 1 000 tonnes per annum.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: coating products, inks and toners and polymers.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids) and indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters).

Article service life

Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal) and of articles where the substances are not intended to be released and where the conditions of use do not promote release.
Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).
This substance can be found in complex articles, with no release intended: vehicles and machinery, mechanical appliances and electrical/electronic products (e.g. computers, cameras, lamps, refrigerators, washing machines).
This substance can be found in products with material based on: plastic (e.g. food packaging and storage, toys, mobile phones), metal used for large surface area articles (e.g. construction and building materials used for roof sheets, pipes), metal used for packaging (excluding food packaging), rubber used for large surface area articles (e.g. construction and building materials for flooring), rubber used for toys and other articles intended for children’s use (e.g. baby bottle nipples, soothers), rubber used for packaging (excluding food packaging), wood used for large surface area articles (e.g. construction and building materials for floors, claddings), wood used for toys and other articles intended for children’s use, wood used for packaging (excluding food packaging) and wood used for furniture & furnishings.

Widespread uses by professional workers

This substance is used in the following products: coating products, metal surface treatment products, non-metal-surface treatment products, inks and toners, finger paints and polymers.
This substance is used in the following areas: printing and recorded media reproduction and building & construction work.
This substance is used for the manufacture of: machinery and vehicles, fabricated metal products and textile, leather or fur.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use resulting in inclusion into or onto a materials (e.g. binding agent in paints and coatings or adhesives), indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Formulation or re-packing

This substance is used in the following products: coating products, inks and toners, polymers and finger paints.
Release to the environment of this substance can occur from industrial use: formulation of mixtures and formulation in materials.

Uses at industrial sites

This substance is used in the following products: polymers, coating products, metal surface treatment products, inks and toners, finger paints, fillers, putties, plasters, modelling clay, non-metal-surface treatment products, textile treatment products and dyes and cosmetics and personal care products.
This substance is used in the following areas: formulation of mixtures and/or re-packaging and printing and recorded media reproduction.
This substance is used for the manufacture of: plastic products, textile, leather or fur, fabricated metal products and machinery and vehicles.
Release to the environment of this substance can occur from industrial use: in the production of articles and industrial abrasion processing with high release rate (e.g. sanding operations or paint stripping by shot-blasting).
Other release to the environment of this substance is likely to occur from: indoor use.

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance.

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 09/04/2021

Categories Display