Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General information
- Personal protection for the First Aider.
- Take affected persons out of danger area and instruct to lie down.
- Instantly remove any clothing soiled by the product.

After inhalation
- In case of unconsciousness bring patient into stable side position for transport.
- Supply fresh air.
- Seek medical treatment.

After skin contact
- Wash with polyethylene glycol and ethanol (2:1). Then wash thoroughly with water and soap.
- Seek medical treatment.

After eye contact
- Rinse opened eye for several minutes under running water.
- Seek medical treatment.

After swallowing
- Rinse out mouth and then drink plenty of water.
- Seek medical treatment.


Most important symptoms and effects, both acute and delayed
- No further relevant information available.

Information for doctor
- Therapeutically measures: basic help, decontamination, symptomatic treatment.


Indication of any immediate medical attention and special treatment needed
- No further relevant information available.
*

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents
- Use fire fighting measures that suit the environment.
- The product is not flammable


Special hazards arising from the substance or mixture
- No further relevant information available.


Advice for firefighters
Protective equipment:
- Wear self-contained breathing apparatus.
- Wear full protective suit.

Additional information
- Collect contaminated fire fighting water separately. It must not enter drains.
*

Accidental release measures

Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Particular danger of slipping on leaked/spilled product.


Environmental precautions:
- Do not allow to enter drainage system, surface or ground water.


Methods and material for containment and cleaning up:
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Use neutralising agent.
- Send for recovery or disposal in suitable containers.


Reference to other sections
- See Section "Handling and storage" for information on safe handling
- See Section "Exposure control / personal protection" for information on personal protection equipment.
- See Section "Disposal considerations" for information on disposal.
*

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant’s intermediate.


Precautions for safe handling
- Prevent formation of aerosols.
- Open and handle container with care.
- Keep PEG 300 / Ethanol or PEG 400 solution ready


Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and containers:
- Prevent any penetration into the ground.

Information about storage in one common storage facility:
- Do not store together with acids.

Further information about storage conditions:
- Protect from frost.


Specific end use(s)
- No further relevant information available.
*

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant’s intermediate.


Exposure controls
Personal protective equipment
General protective and hygienic measures
- The usual precautionary measures should be adhered to general rules for handling chemicals.
- Take off immediately all contaminated clothing
- Store protective clothing separately.
- Wash hands during breaks and at the end of the work.
- Avoid contact with the eyes and skin.
- Use skin protection cream for preventive skin protection.

Breathing equipment:
- In case of brief exposure or low pollution use breathing filter apparatus . In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
- Filter A (EN 14387)
- Filter P2 (EN 143)

Protection of hands:
- Only use chemical-protective gloves with CE-labelling of category III (EN 374).

Material of gloves
- Nitrile rubber
.. Recommended thickness of the material: ≥ 0,425 mm
.. Value for the permeation: > 480 min
- Fluorocarbon rubber (Viton) / Butyl rubber
.. Recommended thickness of the material: ≥ 0,7 mm
.. Value for the permeation: > 480 min
-The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material
- The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

As protection from splashes gloves made of the following materials are suitable:
- Nitril rubber, NBR
- Butyl rubber, BR

Eye protection:
- Tightly sealed safety glasses (EN 166)
- Gauze goggles

Body protection:
- Protective work clothing (EN 340).
- Alkaline resistant protective clothing
*

Stability and reactivity

Reactivity
- No further relevant information available.


Chemical stability
Thermal decomposition / conditions to be avoided:
- No decomposition if used according to specifications.


Possibility of hazardous reactions
- No dangerous reactions known


Conditions to avoid
- No further relevant information available.


Incompatible materials:
- acids


Hazardous decomposition products:
- No dangerous decomposition products known
*

Disposal considerations

Waste treatment methods
Recommendation
- Remove in accordance with the local official recommendations.

European waste catalogue
- The disposal of waste within the EU is regulated by Directive 2008/98/EC
- The waste code classification is to be carried out according to the European Waste Catalogue (EWC) specifically for each branch of industry and each type of process.

Uncleaned packagings:
Recommendation:
- Disposal must be made according to official regulations.
*