Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 242-060-2
CAS number: 18172-67-3
Supply fresh air. If symptoms are experienced, get medical attention.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:
Immediately rinse with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if irritation or skin rash occurs.
After eye contact:
Immediately rinse with plenty of water. Remove contact lenses, if present and easy to do. Hold eyelids apart and flush eyes with plenty of cool low-pressure water for 10-15 minutes. If irritation occurs, consult an ophtalmologist.
Do NOT induce vomiting. If person is conscious, rinse out mouth with water. Seek immediate medical advice.
Flammability of the product:
Suitable extinguishing agents:
CO2, foam, powder.
Unsuitable extinguishing agents:
Water with jet.
Hazardous thermal decomposition products:
In case of fire, may release irritant and toxic fumes.
Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus.
Person-related safety precautions:
Wear personal protective equipment. Evacuate unprotected persons to safe areas. Provide adequate ventilation. Remove all sources of ignition.
Measures for environmental protection:
Do not allow product to reach soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (soil, waterways, drains or sewers).
Measures for cleaning/collecting:
- Small spills : Absorb spilled liquid with inert absorbent. Collect and seal in an appropriate container properly labelled for disposal.
- Large spills : Stop spill if it can be done without danger. Dike. Pump as much liquid as possible with an explosion-proof pump or a hand pump. Absorb the remaining liquid with inert absorbent. Collect and seal in an appropriate container properly labelled for disposal. Use only non-sparking tools.
Wear personal protective equipment. Provide adequate ventilation. Protect against electrostatic charges. Use only non-sparking tools. Keep away from heat, sparks, open flames and hot surfaces.
Requirements for storage areas and containers :
Store in a cool well-ventilated place. Keep container tightly closed. All equipments including ventilation systems must be equipotential and earthed. Keep away from sources of ignition. Protect from heat and direct sunlight.
Recommended and Unsuitable Materials for Storage :
- Recommended materials : Stainless steel, aluminium
- Certain plastics and elastomers may not be compatible with the product. Test or get manufacturers recommendation prior to use.
Provide local exhaust or general room ventilation to minimize exposure to vapours. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Take off contaminated clothing and wash before reuse. Avoid contact with eyes and skin.
Use suitable respiratory protective device in case of insufficient ventilation.
Protective gloves resistant to chemicals (standard EN 374-1).
Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Safety glasses (standard EN 166).
Protective work clothing.
Chemical stability :
No decomposition if used according to specifications.
Conditions to avoid :
Prolonged or excessive heat and/or exposure to air may cause non-hazardous decomposition and/or oxidation of the substance.
Keep away from heat and sources of ignition.
Materials to avoid :
Avoid contact with strong acids and strong oxidizing agents.
The product has to be disposed of in an authorised incinerator, according to regulation. Disposal must be made according to national and regional regulations.
Packaging has to be sent to an authorised waste treatment facility, for recycling or disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again