Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 610-641-3 | CAS number: 512802-65-2
Guidance on Safe Use
Administrative data
First-aid measures
- General advice:
Get medical attention immediately if symptoms occur. Show this safety data sheet to the doctor in attendance.
- Following inhalation:
IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. If breathing is difficult, give oxygen
- Following skin contact:
Wash off immediately with soap and plenty of water. If a person feels unwell or symptoms of skin irritation appear, consult a physician.
- Following eye contact:
Rinse immediately carefully and thoroughly with eye-bath or water. If eye irritation persists consult a specialist.
- Following ingestion:
If swallowed, seek medical advice immediately and show this SDS or label. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Fire-fighting measures
- Suitable extinguishing media:
Carbon dioxide (CO2)
Dry powder
Dry sand
Alcohol-resistant foam
Use water spray or fog; do not use straight streams
- Unsuitable extinguishing media:
none
- Special hazards arising from the substance or mixture:
May emit toxic fumes under fire conditions
-Hazardous combustion products:
Carbon monoxide
Carbon dioxide (CO2)
- Advice for fire fighter: Wear self contained breathing apparatus for fire fighting if necessary
Accidental release measures
- Personal precautions:
Use personal protective equipment.
- Environmental precautions:
Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary sewer system.
- Methods and material for containment and cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder,
sawdust). Sweep up and shovel into suitable containers for disposal. Clean contaminated
surface thoroughly. Prevent product from entering drains. Local authorities should be
advised if significant spillages cannot be contained.
Handling and storage
- Precautions for safe handling:
Avoid contact with skin, eyes and clothing. Avoid breathing mists, dusts, or vapors. Wash hands thoroughly after handling.
- Conditions for safe storage, including any incompatibilities: Keep containers tightly closed in a cool, well-ventilated place. Keep product and empty container away from heat and sources of ignition.
- Additional Storage: Suitable material:
Carbon steel
Stainless steel
Plastic drum
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
1. Technical protection measures: Use only with adequate ventilation
2. Organisational protection measures: This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies
3. Hand protection: Protective gloves, Neoprene gloves. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.
4. Body protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place
5. Eye protection: Safety glasses
6. Respiratory protection: In case of insufficient ventilation wear suitable respiratory equipment.
Stability and reactivity
1. Reactivity
: No dangerous reaction known under conditions of normal use
2. Chemical stability
: Stable under recommended storage conditions
3. Possibility of hazardous reactions
: None known.
4. Conditions to avoid
: Heat, flames and sparks
5. Incompatible materials
: Oxidising agent
6. Hazardous decomposition products: None reasonably foreseeable
Disposal considerations
Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of in accordance with federal, state and local regulations.
Empty containers should be taken to local recyclers for disposal
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
