Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
First aid personnel should pay attention to their own safety. If the patient is likely to become unconscious, place and transport in stable sideways position (recovery position). Immediately
remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Immediately wash thoroughly with soap and water, seek medical attention.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an
eye specialist.
On ingestion:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: Information, i.e. additional information on symptoms and effects may be included in the GHS labeling phrases available in Section 2 and in the Toxicological assessments available in SDS Section 11.
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
Fire-fighting measures
Extinguishing media
Additional information:
Use extinguishing measures to suit surroundings.
Special hazards arising from the substance or mixture
nickel oxides, cobalt oxides, metal oxides
The substances/groups of substances mentioned can be released if the product is involved in a fire.
Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Further information:
Product itself is non-combustible; fire extinguishing method of surrounding areas must be
considered. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Do not breathe dust. Breathing protection required. Avoid contact with the skin, eyes and clothing. Use personal protective clothing. Information regarding personal protective
measures, see SDS section 8.
Environmental precautions
Do not discharge into drains/surface waters/groundwater. Contain contaminated water/firefighting water.
Methods and material for containment and cleaning up
Avoid raising dust. Cleaning operations should be carried out only while wearing breathing apparatus. Dampen, pick up mechanically and dispose of. Correctly dispose of recovered product immediately. Do not discharge into drains/surface waters/groundwater.
Handling and storage
Precautions for safe handling
Avoid inhalation of dusts. Avoid contact with the skin, eyes and clothing. Processing machines must be fitted with local exhaust ventilation. Use only in well-ventilated areas.
Protection against fire and explosion:
The product is not an oxidizer, not self-combustible and not explosive.
Conditions for safe storage, including any incompatibilities
Do not store together with substances which may explode. Segregate from strong oxidizing agents.
Segregate from ammonium salts. Segregate from self-heating substances. Segregate from flammable substances. Segregate from peroxides.
Suitable materials for containers: Aluminium, High density polyethylene (HDPE), Low density polyethylene (LDPE), Polypropylene (PP), Carbon steel (Iron), Stove-lacquer R 78433
Further information on storage conditions: Containers should be stored tightly sealed in a dry place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
Personal protective equipment
Respiratory protection:
Particle filter with high efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P3 or FFP3).
Self-contained breathing apparatus.
Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
chemical protection overall (f.e. according to EN 13982) if dust is formed., Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Store work clothing separately. Hands and/or face should be washed before breaks and at the end of the shift.
Stability and reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals: No corrosive effect on metal.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
Evolution of heat under influence of acids.
The product is chemically stable.
Conditions to avoid
Avoid dust formation. Avoid deposition of dust.
Incompatible materials
Substances to avoid:
strong acids, strong bases, strong oxidizing agents
Hazardous decomposition products
Possible thermal decomposition products:
nickel oxides, cobalt oxides, metallic oxides.
Disposal considerations
Waste treatment methods
Dispose of in accordance with national, state and local regulations.
Contact specialized companies about recycling.
Contaminated packaging:
Dispose of in accordance with national, state and local regulations.
Contaminated packaging should be emptied as far as possible and disposed of in the same manner as the substance/product.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
