Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 430-400-4 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: If symptomatic, move to fresh air. Get medical attention if
symptoms persist.
Emergency measure - Eyes: Any material that is in the eye should be washed out
immediately with water. Get medical attention if symptoms
occur.
Emergency measure - Skin: After contact with skin, wash immediately with plenty of
soap and water. Get medical attention if symptoms occur.
Emergency measure - Ingestion: Seek immediate medical attention.
Fire-fighting measures
Recommended extinguishing agent: Use appropiate medium for adjacent fire. Hazchem code 2Z
Fire or excessive heat may produce hazardous decomposition
products.
Product arising from burning: Hazardous decomposition products: Oxides of nitrogen,
oxides of sulphur.
Product determined by test: N
Protective equipment: Hazchem code 2Z.
Accidental release measures
Emergency measures in case of spillage: Collect up and put in a suitable container. Avoid
generation of dust. Clean surface thoroughly to remove
residual contamination.
Handling and storage
Handling: Avoid prolonged or repeated breathing of dust. Avoid
contact with eyes and prolonged or repeated contact with
skin. Use with adequate ventilation. Wash thoroughly after
handling. Keep away from heat. Powdered material may form
explosive dust-air mixtures. Minimize dust generation and
accumulation. Use only in well ventilated areas. Keep away
from sources of ignition. Keep from contact with oxidizing
materials. Exercise caution in heating, especially in a
closed container.
In case of insufficient ventilation, wear suitable
respiratory equipment. Respirator type: Dust.
It is a good industrial hygiene practice to minimize eye
contact. Wear safety glasses with side shields
(or goggles).
It is a good industrial hygiene practice to minimize skin
contact. For operations where prolonged or repeated skin
contact may occur, impervious gloves should
be worn.
Storage: High temperatures (>175 degrees C) will cause decomposition.
Avoid temperatures above 75 degree C.
Cool conditions (5 - 30 degrees C). Keep container closed.
Keep away from sources of ignition. Keep from contact with
oxidizing materials. Exercise caution in heating,
especially in a closed container.
Packaging of the substance and or preparation: 100 units, in 250-mL Nalgene containers.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Proper Shipping Name: Self-heating, solid, organic, n.o.s.
(bis(2-(((3-(2,5-dihydro-5-(thioxo-KS)-1H-tetrazol-1-yl)
phenyl)amino)carbonyl)benzenesulfonato(2-))-aurate(3-)
tripotassium )
Primary Hazard Class: 4.2
Packing Group: II
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported.
Chemical reaction with water: Not reported.
Dust explosion: No potential for dust explosion.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: It is not practical to recover or recycle the substance.
Industry - Possibility of neutralisation: It is not practical to neutralize the substance.
Industry - Possibility of destruction: controlled discharge: Not recommended.
Industry - Possibility of destruction - incineration: A temperature of 1000 degrees C is expected to be sufficient
to destroy the substance. Combustion will produce oxides
of nitrogen, oxides of sulphur, and hydrogen chloride.
Industry - Possibility of destruction - water purification: This substance is not likely to biodegrade. It is expected
to be very water soluble (Log Kow < 1), and it is likely
that the Log of Henry's Law constant is <1. Based on these
estimates, the SIMPLETREAT model predicts 0% removal from
water following wastewater treatment.
Industry - Possibility of destruction - other: None
Public at large - Possibility of recovery/recycling: It is not practical to recover or recycle the substance.
Public at large - Possibility of neutralisation: It is not practical to neutralize the substance.
Public at large - Possibility of destruction: controlled discharge: Not recommended.
Public at large - Possibility of destruction - incineration: A temperature of 1000 degrees C is expected to be sufficient
to destroy the substance. Combustion will produce oxides of
nitrogen, oxides of sulphur, and hydrogen chloride.
Public at large - Possibility of destruction - water purification: This substance is not likely to biodegrade. It is expected
to be very water soluble (Log Kow < 1), and it is likely
that the Log of Henry's Law constant is <1. Based on these
estimates, the SIMPLETREAT model predicts 0% removal from
water following wastewater treatment.
Public at large - Possibility of destruction - others: None
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
