Registration Dossier

Administrative data

First-aid measures

- General advice: Keep person warm and at rest. When symptoms persist or in all cases of doubt seek medical advice. Wash contaminated clothing before reuse.
- Eye contact: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Consult a physician.
- Skin contact: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Consult a physician.
- Ingestion: Rinse mouth. Get medical attention immediately if symptoms occur.
- Inhalation: Move to fresh air. Get medical attention immediately if symptoms occur.
- Protection of first-aiders: Use personal protective equipment. Avoid contact with skin, eyes and clothing.

Most important symptoms and effects, both acute and delayed:
- Main symptoms: If in eyes: Burning feeling, Redness, Pain. If on skin: Itching, Redness.

Indication of any immediate medical attention and special treatment needed:
- Notes to physician: Treat symptomatically. If breathing is difficult, give oxygen. Keep victim under observation. Symptoms may be delayed.

Fire-fighting measures

Extinguishing media:
- Suitable Extinguishing Media: Water spray, Foam, Dry powder, Carbon dioxide (CO2).
- Unsuitable Extinguishing Media: Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture:
- Special Hazard: None in particular.

Advice for firefighters:
- Fire fighting measures: Evacuate non-essential personnel. Move containers from fire area if you can do it without risk. Keep containers and surroundings cool with water spray. Prevent fire extinguishing water from contaminating surface water or the ground water system.
- Special protective equipment for fire-fighters: Wear self-contained breathing apparatus and protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
- Evacuate personnel to safe areas: Do not touch or walk through spilled material. Avoid contact with skin, eyes and clothing. Avoid breathing vapours or mists. Use personal protective equipment. Ensure adequate ventilation.

Environmental precautions:
- Should not be released into the environment. Prevent further leakage or spillage if safe to do so.

Methods and material for containment and cleaning up:
- Large amounts: Prevent further leakage or spillage if safe to do so. Dike to collect large spills. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Following product recovery, flush area with water.
- Small amounts: Wipe up with absorbent material (e.g. cloth, fleece). After cleaning, flush away traces with water. Never return spills in original containers for re-use.

Handling and storage

Precautions for safe handling:
- Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Avoid breathing vapours or mists. Ensure adequate ventilation. Wear personal protective equipment. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product.

Conditions for safe storage, including any incompatibilities:
- Store in accordance with local regulations. Keep containers tightly closed in a cool, well-ventilated place. Incompatible with oxidising agents.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated.
Shipping information
Proper shipping name and description:
Not regulated.
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated.
Shipping information
Proper shipping name and description:
Not regulated.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls:
- Ensure adequate ventilation, especially in confined areas. Keep at temperatures below 200 °C / 392 °F. Ensure that eyewash stations and safety showers are close to the workstation location.

Individual protection measures, such as personal protective equipment:
- Eye protection: Face-shield (EN166).
- Hand Protection: Protective gloves (EN374): Butyl rubber. Glove thickness: 0.5 mm . Break through time: >8 hours. Unsuitable materials: Natural Rubber, Nitrile rubber, Fluorinated rubber, PVC.
- Skin and body protection: Long sleeved clothing. Chemical resistant apron. Boots.
- Respiratory protection: Aerosol or mist formation: In case of insufficient ventilation wear suitable respiratory equipment (APF).
- Recommended Filter Type: A, Brown.

Hygiene Measures:
- Handle in accordance with good industrial hygiene and safety practice. Workers must be trained in the proper use and handling of this product as required under applicable regulations. Do not eat, drink or smoke when using this product. Wash hands before breaks and immediately after handling the product. Wash contaminated clothing before re-use.

Environmental Exposure Controls:
- The product should not be allowed to enter drains, water courses or the soil.

Stability and reactivity

- Reactivity: None known.
- Chemical stability: Stable under recommended storage conditions.
- Possibility of hazardous reactions: No information available.
- Conditions to avoid: Temperatures above 200 °C / 392 °F.
- Incompatible materials: Oxidizing agents.
- Hazardous decomposition products: None under normal use.

Disposal considerations

- Waste from residues / unused products: Dispose of in accordance with local regulations.
- Contaminated packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal.