REACH reglamentu siekiama geriau apsaugoti žmonių sveikatą ir aplinką nuo cheminių medžiagų keliamos rizikos.
CLP reglamentu užtikrinama, kad klasifikuojant ir ženklinant chemines medžiagas darbuotojai ir vartotojai Europos Sąjungoje būtų aiškiai informuojami apie cheminių medžiagų keliamus pavojus.
Klasifikavimo ir ženklinimo inventorius
BPR reglamentu siekiama patobulinti biocidinių produktų rinkos veikimą ES, tuo pačiu užtikrinant labai gerą žmonių ir aplinkos apsaugą.
veikliųjų medžiagų patvirtinimas
Biocidinių produktų autorizacija
Rekomendacijos ir IT priemonės
Išankstinio pranešimo apie sutikimą (IPS) reglamentas reglamentuoja tam tikrų pavojingų medžiagų importą ir eksportą bei nustato prievoles įmonėms, norinčioms šias chemines medžiagas eksportuoti į ES nepriklausančias šalis.
cheminių medžiagų, kurioms taikomas IPS, sąrašai
Ribinės vertės darbo aplinkoje nustatomos pagal dvi teisines sistemas, kurios yra neatsiejama ES darbuotojų sveikatos apsaugos mechanizmo dalis.
The Waste Framework Directive aims to protect the environment and human health from the generation and management of waste and to improve efficient use of resources.
Pagal Patvariųjų organinių teršalų (POT) reglamentą Europos Sąjungoje draudžiama gaminti ir naudoti patvariuosius organinius teršalus arba jų gamyba ir naudojimas yra griežtai ribojami.
Cheminių medžiagų sąrašai
ECHA rengia konsultacijas, kad sužinotų visų suinteresuotųjų šalių nuomonę ir surinktų kuo daugiau reglamentavimo procesams reikalingos mokslinės informacijos.
Tai – unikalus informacijos apie Europoje pagamintas ir į ją importuotas chemines medžiagas šaltinis. Čia pateikiama informacija apie pavojingas cheminių medžiagų savybes, klasifikavimą, ženklinimą ir saugų jų naudojimą.
Pagalbos skiltyje pateiktos priemonės ir praktinės rekomendacijos įmonėms, kurioms taikomos ES cheminių medžiagų teisės aktuose numatytos prievolės.
Infocards are automatically generated based on industry data. What is an infocard?
The residue from the distillation of high temperature coal tar. A black solid with an approximate softening point from 30°C to 180°C (86°F to 356°F). Composed primarily of a complex mixture of three or more membered condensed ring aromatic hydrocarbons.
The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.
Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.
The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.
If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.
The EC or list number is the primary substance identifier used by ECHA.
The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.
The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
More help available here.
EC / List no.: 266-028-2
CAS no.: 65996-93-2
The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).
This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.
The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:
To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.
More information about Classification and Labelling is available in the Regulations section of ECHA website.
Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.
The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.
If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.
It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.
More info on CLH can be found here.
If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.
If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.
Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.
Danger! According to the harmonised classification and labelling (ATP05) approved by the European Union, this substance may cause genetic defects, may cause cancer and may damage fertility and may damage the unborn child.
Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance may damage fertility or the unborn child, may cause long lasting harmful effects to aquatic life and may cause an allergic skin reaction.
This section provides an overview of the calculated volume at which the substance is manufactured or imported to the European Economic Area (EU28 + Iceland, Liechtenstein and Norway). Additionally, if available, information on the use of the substance and how consumers and workers are likely to be exposed to it can also be displayed here.
The use information is displayed per substance life cycle stage (consumer use, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites or in manufacturing). The information is aggregated from the data coming from REACH substance registrations provided by industry.
For a detailed overview on identified uses and environmental releases, please consult the registered substance factsheet.
Use descriptors are adapted from ECHA guidance to improve readability and may not correspond textually to descriptor codes described in Chapter R.12: Use Descriptor system of ECHA Guidance on information requirements and chemical safety assessment.
The examples provided are generic examples and may not apply to the specific substance you are viewing. A substance may have its use restricted to certain articles or products and therefore not all the examples may apply to the specific substance. Furthermore, some substances can be found in an article, but with unlikely exposure (e.g. inside a watch) or with very low concentrations considered not to pose risks to human health or the environment.
For readability purpose, only non-confidential use descriptors occurring in more than 5% of total occurrences are displayed.
The described Product category (i.e. the products in which the substance may be used) may refer to uses as intermediate and under controlled conditions, for which there is no consumer exposure.
More help is available here.
This substance is manufactured and/or imported in the European Economic Area in 100 000 - 1 000 000 tonnes per year.
This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. Release to the environment of this substance can occur from industrial use: formulation of mixtures. Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials).
Release to the environment of this substance can occur from industrial use: formulation of mixtures, in the production of articles, manufacturing of the substance, as an intermediate step in further manufacturing of another substance (use of intermediates) and formulation in materials. Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials). This substance can be found in products with material based on: plastic (e.g. food packaging and storage, toys, mobile phones).
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. This substance is used in the following areas: formulation of mixtures and/or re-packaging. Release to the environment of this substance can occur from industrial use: formulation of mixtures and in the production of articles. Other release to the environment of this substance is likely to occur from: outdoor use resulting in inclusion into or onto a materials (e.g. binding agent in paints and coatings or adhesives), outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates). Release to the environment of this substance can occur from industrial use: formulation in materials, formulation of mixtures and in the production of articles.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates). This substance is used in the following areas: formulation of mixtures and/or re-packaging. This substance is used for the manufacture of: chemicals, metals and mineral products (e.g. plasters, cement). Release to the environment of this substance can occur from industrial use: as an intermediate step in further manufacturing of another substance (use of intermediates), in the production of articles, as processing aid, formulation of mixtures and formulation in materials. Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials).
Release to the environment of this substance can occur from industrial use: manufacturing of the substance.
The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.
Properties of concern are calculated at four "levels" of certainty:
The following properties of concern are calculated:
The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications.
Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).
Toxic to Reproduction
A majority of data submitters agree this substance is Skin sensitising
Persistent, Bioaccumulative and Toxic
This section highlights four regulatory activities or outcomes under REACH – Registration, Evaluation, Authorisation and Restriction of Chemicals – Regulation (EC) No 1907/2006:
Please note: The identification of relevant regulatory activities and outcomes is done automatically and without manual verification. Substances may be grouped together under a specific regulatory activity for more efficient risk management and legislative processing (e.g. restriction on "Lead and its compounds"). In these cases, Infocards may not identify all substances in the group.Therefore it does not represent official and legally–binding information. To confirm if a substance is covered by a specific regulatory action the official publication, e.g. the electronic edition of the Official Journal of the European Union should be consulted.
This section provides links to the list of precautions (precautionary statements) and to the guidance on safe use, if they have been provided in REACH registration dossiers.
Please note: Precautionary measures and guidance on safe use concern the use and handling of the specific substance as such, not of the presence of the substance in other articles or mixtures. The precautionary measures and guidance on safe use are as submitted to ECHA by registrants under the REACH Regulation. Information on precautionary measures and the safe use is submitted by the registrant of a substance and the registrant is solely responsible for its accuracy and completeness.
The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.
The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.
InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.
Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):
European Chemicals Agency
Sekite mūsų naujienas
Nors ECHA internete skelbia daug informacijos jūsų kalba, dalis informacijos šiame puslapyje pateikiama tik anglų kalba. Daugiau apie ECHA daugiakalbystės politiką.
Uždaryti Neberodyti šio pranešimo.
Sveiki atvykę į ECHA svetainę! Ši tinklavietė nepritaikyta naudoti su naršykle Internet Explorer 7 (ir ankstesnėmis jos versijomis). Jums reikalinga naujesnė naršyklės Internet Explorer versija.
Siekdami užtikrinti, kad būtų patogu naudotis mūsų svetaine, jos tinklapiuose naudojame slapukus.
Uždaryti Daugiau informacijos apie tai, kaip naudojame slapukus.