Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice : Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled : Call a physician or poison control centre immediately.
Move to fresh air.
If unconscious, place in recovery position and get medical
attention immediately.
In case of skin contact : If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact : Remove contact lenses.
Flush eyes with water as a precaution.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Most important symptoms
and effects, both acute and
: Skin contact may provoke the following symptoms:
Allergic reactions
Inhalation may provoke the following symptoms:
Shortness of breath
Ingestion may provoke the following symptoms:
Stomach/intestinal disorders

Fire-fighting measures

Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing
: High volume water jet
Specific hazards during firefighting
: Do not allow run-off from fire fighting to enter drains or water
Hazardous combustion products
: Nickel compounds
Sulphuric acid
Specific extinguishing methods
: Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for firefighters
: Wear self-contained breathing apparatus for firefighting if necessary.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
: Use personal protective equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions : Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).

Handling and storage

Advice on protection against
fire and explosion
: Normal measures for preventive fire protection.
Advice on safe handling : Avoid formation of aerosol.
Do not breathe vapours/dust.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the application area.
Provide sufficient air exchange and/or exhaust in work rooms.
Persons susceptible to skin sensitisation problems or asthma,
allergies, chronic or recurrent respiratory disease should not
be employed in any process in which this mixture is being
Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Electrical installations / working materials must comply with
the technological safety standards.
To maintain product quality, do not store in heat or direct sunlight.
Further information on storage stability
: Keep in a dry place.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures : Handle only in a place equipped with local exhaust (or other
appropriate exhaust).
Personal protective equipment
Respiratory protection : Suitable mask with particle filter P3 (European Norm 143)
In the case of vapour formation use a respirator with an approved filter.
When workers are facing concentrations above the exposure
limit they must use appropriate certified respirators.
Hand protection
Material : Nitrile rubber
Break through time : > 480 min
Glove thickness : 0.12 mm
Material : PVC
Break through time : > 480 min
Glove thickness : 1.1 mm
Material : Neoprene gloves
Break through time : > 480 min
Glove thickness : 0.35 mm
Glove length : Long sleeve gloves
Eye protection : Wear safety glasses with side shields or goggles.
Skin and body protection : Impervious clothing
Footwear protecting against chemicals
Hygiene measures : General industrial hygiene practice.
Wash hands before breaks and immediately after handling
the product.

Stability and reactivity

Reactivity : Stable at normal ambient temperature and pressure.
Chemical stability : No decomposition if stored and applied as directed.
Possibility of hazardous reactions
: Stable under recommended storage conditions.
Conditions to avoid : Extremes of temperature and direct sunlight.
Hazardous decomposition
: No decomposition if stored normally.

Disposal considerations

Disposal methods
Waste from residues : The product should not be allowed to enter drains, water
courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Send to a licensed waste management company.
Dispose of as hazardous waste in compliance with local and
national regulations.
Contaminated packaging : Empty remaining contents.
Dispose of contaminated packaging as if unused product.
Do not re-use empty containers.