legislation-obligation

Substance Regulatory Obligations

OBL

Tetrasodium [[[(3-amino-4-sulphophenyl)amino]sulphonyl]-29H,31H-phthalocyaninetrisulphonato(6-)-N29,N30,N31,N32]nickelate(4-)

EC number: 300-365-9

CAS number: 93939-76-5

Last updated: 16/10/2021
ECHA Legislation Regulatory Obligations

Regulatory obligations may exist for this substance under the legislations under ECHA’s remit or for which ECHA has delegated tasks (i.e. REACH, CLP, BPR, PIC, CAD / CMD, WFD, and POPs). Please check the substance Infocard.

Atmospheric Pollutants Emission Reductions Directive

Atmospheric Pollutants Directive, Annex I - Annual Emission Reporting

This list contains the Annex I pollutants that European Union Member States (MS) must measure and report on as part of their national emission reporting requirements. Table A lists the required annual reporting requirements; Table B lists the optional annual reporting requirements; Table C lists required two- and four-year reporting requirements. The National Emission Ceilings Directive 2016/2284/EU establishes emission reduction commitments for all EU MS.

Name CAS Element Expressed As Group Note(s) Reference Reporting Date Table Time Series  
nickel and its compounds
Total national emissions by NFR source category
heavy metals
Art 8(1)(2) Member States may prepare and annually update national emission inventories for the pollutants set out in Table B of Annex I, in accordance with the requirements set out therein.
15 February
B Annual emission reporting requirements as referred to in the second subparagraph of Article 8(1)
Annual, from 1990 (2000 for TSP,) to reporting year minus 2 (X-2)
Details
nickel and its compounds
Informative Inventory Report
heavy metals
Art 8(3) Member States shall draw up an informative inventory report which shall accompany the national emission inventories and projections referred to in paragraphs 1 and 2, in accordance with the requirements set out in Table D of Annex I.
15 March
D Annual reporting requirements on informative inventory report referred to in Article 8(3)
All years (as indicated in table B)
Details
Industrial Emissions Directive

IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants

This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.

Name CAS Expressed As Annex Group Average duration qualifier Average limit Maximum limit Average sampling duration Emission medium fuel Fuel class Part Point Thermal input Process/equipment Qualifier Notes  
Nickel and its compounds
As Nickel
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
0.5 mg/l
Waste water from the cleaning of waste gases
Part 5 (VI) Emission limit values for discharges of waste water from the cleaning of waste gases
Waste incineration plants and waste co-incineration plants
Details
Nickel and its compounds
As Nickel
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
Antimony, arsenic, lead, chromium, cobalt, copper, manganese, nickel and vanadium and their compounds
0.5 mg/Nm3
0.5 h
8 h
Waste gases
Part 3 (VI) Air emission limit values for waste incineration plants
1.3
Waste incineration plants
21 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC, when they are standardised at 3 % oxygen, and in the cases referred to in Point 2.7 of Part 6
22 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds
24 Emission limit value defined as total emission limit for the total sum of antimony, arsenic, lead, chromium, cobalt, copper, manganese, nickel and vanadium, expressed as average value over the sampling period
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Nickel and its compounds
As Nickel
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
Antimony, arsenic, lead, chromium, cobalt, copper, manganese, nickel and vanadium and their compounds
0.5 mg/Nm3
0.5 h
8 h
Waste gases
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
2.2
Cement kilns co-incinerating waste
22 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds
24 Emission limit value defined as total emission limit for the total sum of antimony, arsenic, lead, chromium, cobalt, copper, manganese, nickel and vanadium, expressed as average value over the sampling period
28 All values are standardised at 10 % oxygen
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Nickel and its compounds
As Nickel
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
Antimony, arsenic, lead, chromium, cobalt, copper, manganese, nickel and vanadium and their compounds
0.5 mg/Nm3
0.5 h
8 h
Waste gases
Solid or liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.3
Combustion plants co-incinerating waste
22 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds
24 Emission limit value defined as total emission limit for the total sum of antimony, arsenic, lead, chromium, cobalt, copper, manganese, nickel and vanadium, expressed as average value over the sampling period
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
34 O2 content 6% for solid fuels and 3% for liquid fuels
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Toy Safety Directive

Toy Safety Directive - Substances Restricted in Toys

This list contains substances whose use in toys is restricted in the European Union in accordance with points 8 and 13, Part III, and Appendices A and C of Annex II (Particular Safety Requirements) to Directive 2009/48/EC on toy safety. List entries include substance name, CAS number, limit values for certain product types and, where applicable, notes on restrictions.

Name CAS Application Name Expressed As Content limit Emission Limit Restriction(s) SML Notes  
Nickel and its compounds
Dry, brittle, powder-like or pliable toy material
As Nickel
Banned if exceeded the migration limit (without prejudice to points 3, 4 and 5, Part III, Annex II)
75 mg/kg
Point 13, Part III, Annex II
These limit values shall not apply to toys or components of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking, swallowing or prolonged contact with skin when used as specified in the first subparagraph of Article 10(2)
Details
Nickel and its compounds
Liquid or sticky toy material
As Nickel
Banned if exceeded the migration limit (without prejudice to points 3, 4 and 5, Part III, Annex II)
18.8 mg/kg
Point 13, Part III, Annex II
These limit values shall not apply to toys or components of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking, swallowing or prolonged contact with skin when used as specified in the first subparagraph of Article 10(2)
Details
Nickel and its compounds
Scraped-off toy material
As Nickel
Banned if exceeded the migration limit (without prejudice to points 3, 4 and 5, Part III, Annex II)
930 mg/kg
Point 13, Part III, Annex II
These limit values shall not apply to toys or components of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking, swallowing or prolonged contact with skin when used as specified in the first subparagraph of Article 10(2)
Details
Nickel and its compounds
Any toys except in toys and toy components made of stainless steel and toy components which are intended to conduct an electric current
As Nickel
Shall not be used in toys, in components of toys or in micro-structurally distinct parts of toys (Point 3, Part III, Annex II). See Point 4 and 5 for derogations from Point 3
Classification: CMR2, according to Appendix A to Annex II
Details
Water Environmental Quality Standards Directive

Annex I, Part A - Priority Substances & Pollutants in water

This list contains environmental quality standards (EQS), including annual averages and maximum allowable concentrations, for priority substances and certain other pollutants, as provided for in Article 16 of Directive 2000/60/EC establishing a framework for Community action in the field of water policy.

Name CAS NO Average limit Maximum limit Average sampling duration Emission medium Qualifier  
Nickel and its compounds
23
4 µg/l
34 µg/l
1 yr
Inland surface waters
Details
Nickel and its compounds
23
8.6 µg/l
34 µg/l
1 yr
Surface waters other than inland surface waters
Details
Water Framework Directive

Water Framework Directive, Annex X - Priority Substances

This list contains substances identified as priority substances that are targeted for reduction and eventual removal from waste water discharge. The list includes 'priority hazardous substances' which are subject to special restrictions.

Name EC Number CAS Priority Group Notes  
Nickel compounds
Details