Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 465-280-2 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
case of indisposition seek medical advice.
Emergency measure - Eyes: Immediately flush eyes with plenty of water. Get medical
attention if irritation develops or persists. After initial
flushing, remove any contact lenses.
Emergency measure - Skin: Wash with soap and water. Get medical attention if
irritation develops or persists. For hot product,
immediately immerse in or flush affected area with large
amounts of cold water to dissipate heat. Cover with clean
cotton sheeting or gauze and get prompt medical attention.
Emergency measure - Ingestion: No hazard in normal industrial use. Symptomatic treatment.
Do not induce vomiting. Seek medical attention if symptoms
develop.
Fire-fighting measures
recommended because their lack of cooling capacity may
permit re-ignition.
Product arising from burning: COx, hydrocarbon fragments, smoke
Product determined by test: N
Protective equipment: Wear safety glasses with side shields or chemical goggles.
In addition, use full-face shield when cleaning processing
fume condensates from hoods, ducts, and other surfaces. When
handling pellets or powder, avoid prolonged or repeated
contact with skin. Wear long pants, long sleeves, well
insulated gloves, and a face shield during melt processing.
Appropriate clothing - including chemical resistant gloves -
should be worn to prevent dermal contact with processing
fumes condensate. When using this product at elevated
temperatures, implement engineering systems, administrative
controls, or a respiratory protection program (including a
respirator approved for protection from organic vapors, acid
gases, and particulate matter). If processing fumes are not
adequately controlled, or if operators experience symptoms
of overexposure, seek medical attention. If dust or powder
are produced from secondary operations such as sawing or
grinding, use a respirator approved for protection from dust
.
Accidental release measures
disposal evaluation. Allow molten material to solidify
before disposal.
Handling and storage
recommendations on label and in processing guide. Prevent
contact with skin and eyes. Use good industrial hygiene
practices. Provide adequate ventilation. Secondary
operations such as grinding, sanding, or sawing may produce
a dust explosion hazard. Use aggressive housekeeping
activities to prevent dust accumulation: employ bonding,
grounding, venting, and explosion relief provisions in
accordance with accepted engineering practices.
Storage: Store in well sealed and secure containers. Store in a cool
and dry place. Avoid polymer residue outside
the containers. Avoid excessive heat and ignition sources.
Packaging of the substance and or preparation: 25 kg bags; 500 kg boxes
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: Not classified.
Transport: Transport in well sealed suitable containers. The
containers should be secured against falling down. Label
containers in accordance with pertinent regulations.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Chemical reaction with water: Not water reactive.
Dust explosion: Material not sensitive to mechanical impact but is sensitive
to static discharge under dust cloud conditions.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of neutralisation: No method known.
Industry - Possibility of destruction: controlled discharge: Not recommended.
Industry - Possibility of destruction - incineration: Code 661: Incineration with flue gas scrubbing.
Industry - Possibility of destruction - water purification: Not applicable.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: None.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
