Salta al contenuto
Salta al contenuto

Pareri adottati e consultazioni precedenti sulle domande di autorizzazione

Pareri adottati e consultazioni precedenti sulle domande di autorizzazione

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0079-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins Commission decided
0081-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GRUPA LOTOS S.A. Use as an extraction solvent in the de-waxing of petroleum vacuum distillates and de-asphalted oil and de-oiling of slack wax for the production of base oils and paraffinic waxes. Commission decided
0076-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as solvent and crystallisation medium in the synthesis of the EU pesticide bentazone (ISO) Commission decided
0083-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives Commission decided
0082-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] Industrial use of 1,2-dichloroethane as an emulsifying solvent in the manufacture of porous particles for beaded chromatography and cell culture media. Commission decided
0079-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins Commission decided
0109-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Akzo Nobel Chemicals SpA The use of 1,2-dichloroethane as recyclable solvent in the production of a polyacrylate surfactant Commission decided
0108-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride Commission decided
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided
0111-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. Commission decided
0077-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride Commission decided
0106-01 Initial Ammonium dichromate 232-143-1 7789-09-5 BAE Systems (Operations) Limited
Qioptiq Ltd
Industrial use of Ammonium Dichromate in the process of manufacturing holographic combiners for diffractive head-up displays intended to be used in military aircrafts Commission decided
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Commission decided
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Commission decided
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided
0065-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness Commission decided
0058-01 Initial Chromium trioxide 215-607-8 1333-82-0 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of chromium trioxide for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided
0032-04 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis Minerals B.V. in its legal capacity as Only Representative of Elementis Chromium Inc. [application transferred from original Applicant: “Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc.” due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment for applications in the aeronautics and aerospace industries, unrelated to Functional chrome plating or Functional chrome plating with decorative character Commission decided
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided
0033-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy Use of chromium trioxide in Cr(VI) based functional plating Commission decided
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided
0128-01 Initial Chromium trioxide 215-607-8 1333-82-0 Doosan Electro-Materials
Luxembourg SARL
Volta Energy Solutions Hungary Kft [name of applicant in the original application: Doosan Energy Solution Kft updated due to a notified corporate name change]
Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Commission decided
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change].
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis Minerals B.V. in its legal capacity as Only Representative of Elementis Chromium Inc. [application transferred from original Applicant: “Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc.” due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Commission decided
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided
0072-03 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. Commission decided
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided
0119-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Friedrichshafen AG Functional chrome plating of piston rods for automotive and rail applications Commission decided
0096-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of chromium trioxide for chemical conversion and slurry coating applications by aerospace companies and their suppliers Commission decided
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided
0095-04 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Commission decided
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided



Categories Display

Contrassegnato come:

(fai clic sul tag per cercare i contenuti pertinenti)


Route: .live2