Substance Information

Data platform availability banner - infocard, search, nanomaterias

REACH Registration data can be found in the new ECHA CHEM database. The old ‘Registered substance factsheets’ will be available on this web site during the transition period but have not been updated since 19 May 2023. More

 

Substance Infocard

IC

Lead compounds

Help Substance identity

The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.

Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.

EC (European Community) Number

The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.

If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.

The EC or list number is the primary substance identifier used by ECHA.

CAS (Chemical Abstract Service) registry number

The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.

Molecular formula

The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

Molecular structure

The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

More help available here.

EC / List no.: -

CAS no.: -

Mol. formula:

No image available
Help Hazard classification and labelling

The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).

This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.

Please note:

The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:

  • Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
  • Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).

To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.

More information about Classification and Labelling is available in the Regulations section of ECHA website.

More help available here.

Harmonised classification and labelling (CLH)

Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.

The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.

If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.

It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.

More info on CLH can be found here.

Classification and labelling under REACH

If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.

Notifications under the Classification Labelling and Packaging (CLP) Regulation

If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.

Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.

There is no harmonised classification and there are no notified hazards by manufacturers, importers or downstream users for this substance.

Help Important to know

This section highlights four regulatory activities or outcomes under REACH – Registration, Evaluation, Authorisation and Restriction of Chemicals – Regulation (EC) No 1907/2006:

  • Community rolling action plan - indicates if the substance is or was included in the Community rolling action plan (CoRAP). The CoRAP list includes substances that could pose a risk to human health or the environment and whose (potentially hazardous) properties are to be evaluated by the Member States in the next three years. After evaluation, proposals may be made for further regulatory action regarding the substance.
  • Candidate List - indicates if the substance is included in the candidate list of substances of very high concern (SVHCs). The Candidate List includes substances that are subject to additional protocols and reporting obligations and which may eventually be included in the Authorisation List, further limiting their use.
  • Authorisation list (Annex XIV to REACH) - indicates if the substance is included in the Authorisation list. These substances cannot be placed on the market or used after a given date, unless an authorisation is granted for their specific use, or the use is exempted from authorisation.
  • Restriction list (Annex XVII to REACH) - indicates if the substance is included in the Restriction List. The Restriction List describes the conditions for the manufacture, placing on the market or use of certain substances, either on their own or in mixtures or articles.

Please note: The identification of relevant regulatory activities and outcomes is done automatically and without manual verification. Substances may be grouped together under a specific regulatory activity for more efficient risk management and legislative processing (e.g. restriction on "Lead and its compounds"). In these cases, Infocards may not identify all substances in the group.Therefore it does not represent official and legally–binding information. To confirm if a substance is covered by a specific regulatory action the official publication, e.g. the electronic edition of the Official Journal of the European Union should be consulted.

More help available here.

about INFOCARD - Last updated: 21/12/2021 InfoCard

The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.

The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.

InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.

More help available here.

Help Help

Key datasets

HELP HELP

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
Region Legislation Emission medium Process/equipment Maximum emissions Average emissions Notes
Maximum limit Maximum sampling duration Average limit Average sampling duration
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 0.5 mg/Nm3 8.0 h These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% for solid fuels and 3% for liquid fuels For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Cement kilns co-incinerating waste 0.5 mg/Nm3 8.0 h These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period All values are standardised at 10 % oxygen All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Waste incineration plants 0.5 mg/Nm3 8.0 h All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC when they are standardised at 3 % oxygen and in the cases referred to in Point 2.7 of Part 6 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste water from the cleaning of waste gases Waste incineration plants and waste co-incineration plants 0.2 mg/l
European Union Water Environmental Quality Standards Directive Inland surface waters 14.0 µg/l 1.2 µg/l 1.0 yr Unless otherwise specified the EQS parameter expressed as an annual average value (AA-EQS) applies to the total concentration of all isomers. Inland surface waters encompass rivers and lakes and related artificial or heavily modified water bodies. These EQS refer to bioavailable concentrations of the substances.
European Union Water Environmental Quality Standards Directive Surface waters other than inland surface waters 14.0 µg/l 1.3 µg/l 1.0 yr Unless otherwise specified the EQS parameter expressed as an annual average value (AA-EQS) applies to the total concentration of all isomers. Inland surface waters encompass rivers and lakes and related artificial or heavily modified water bodies. These EQS refer to bioavailable concentrations of the substances.
Batteries Directive
  • Batteries Directive - Prohibitions & Labelling
    EU. Prohibited Substances (Article 4) & Labelling Requirements (Article 21(3)), Directive 2006/66/EC on Batteries and Accumulators, 26 September 2006, as amended by Directive 2018/849/EU, 14 June 2018

    This list contains use prohibitions of mercury and cadmium above certain thresholds in batteries and accumulators, with certain exceptions. It also captures certain labelling requirements on such products containing mercury, cadmium and lead above specified quantities.

CAD - Chemical Agents Directive
  • CAD - Chemical Agents Directive, Annex II - Binding BLVs
    EU. Directive 98/24/EC, Annex II, Binding Biological Limit Values and Health Surveillance Measures, OJ (L 131) 11, 5 May 1998

    This list contains substances assigned a binding biological exposure limit (BEL) by the European Union. National BELs for these substances may not deviate from the limits in the Directive. Annex II contains the binding BEL for lead.

CMD - Carcinogens and Mutagens Directive
  • CMRD - Carcinogens, Mutagens, Reprotoxins Directive, Annex IIIa - BLVs
    EU. BLVs for Certain Hazardous Substances: Annex IIIa, Directive 2004/37/EC (CMRD), as amended by Directive (EU) 2022/431, 16 March 2022

    This list provides the biological limit values (BLVs) pursuant to Annex IIIa of Directive 2004/37/EC (CMRD). Employers are obligated to minimize worker exposure to these agents in so far as possible, and must arrange for medical surveillance of workers exposed to these substances.

Construction Products Regulation
  • Construction Product Regulation - Annex I (3) - Hazardous Substances
    EU. Hazardous Substances for Purposes of Annex I (3) (Requirements for Construction Works), Regulation 305/2011/EU on Marketing of Construction Products, amended by Regulation 574/2014/EU, 28 May 2014

    This list contains a non-exhaustive inventory of substances taken from: (1) Table 3 of Annex VI to CLP; (2) the Candidate List of SVHCs; (3) Annex XIV of REACH (Authorisation List); (4) Annex XVII of REACH (Restrictions List); (5) F-gases subject to emission limits/reporting per Regulation 517/2014/EU; and (6) volatile organic compounds (VOCs) listed in the Ambient Air Directive 2008/50/EC. The basis of the list is Annex I(3) of the Construction Products Regulation 305/2011/EC, which stipulates that construction works must not have a high impact on human health or the environment as a result of: giving off toxic gas; emissions of dangerous substances, volatile organic compounds (VOC), greenhouse gases or dangerous particles into indoor or outdoor air; release of dangerous substances into drinking water, ground water, marine waters, surface waters or soil.

Cosmetic Products Regulation
  • Cosmetic Products Regulation, Annex II - Prohibited Substances
    EU. Prohibited Substances: Annex II, Regulation 1223/2009/EC on Cosmetic Products, as amended by Regulation (EU) 2023/1490, OJ L 183, 20 July 2023

    This list contains substances which are banned from use in any cosmetic products marketed for sale or use in the European Union.

End-of-Life Vehicles Directive
  • End-of-Life Vehicles Directive - General Use Exemptions
    EU. General Use Exemptions from Article 4(2)(a) (Annex II), Directive 2000/53/EC on End-of-Life Vehicles, as amended by Directive 2020/363/EU, 5 March 2020

    This list contains the Annex II material and component general use exemptions that apply to the substances prohibited from use in the manufacture of automobiles under Art. 4(2)(a) of the ELV Directive.

  • End-of-Life Vehicles Directive - Specific Use Exemptions
    EU. Specific Use Exemptions from Article 4(2)(a) (Annex II), Directive 2000/53/EC on End-of-Life Vehicles, as amended by Commission Delegated Directive (EU) 2023/544, OJ L 73, 10 March 2023

    This list contains the specific Annex II material and component use exemptions for the substances prohibited from use in the manufacture of automobiles under Art. 4(2)(a) of the ELV Directive.

General Product Safety Directive
  • General Product Safety Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of General Product Safety Directive (2001/95/EC), 15 January 2002, amended by Reg 596/2009/EC, 18 July 2009

    This list contains a non-exhaustive inventory of substances that fall within the European Union's hazardous substance definitions, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annexes XIV and XVII (Authorisation and Restriction lists). They can be considered hazardous for purposes of the General Product Safety Directive 2001/95/EC.

Industrial Emissions Directive
  • IPPC - Industrial Emissions Directive, Annex II - Polluting Substances
    EU. Polluting Substances: Annex II, Directive 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010

    This list contains the polluting substances for which emission limit values are assigned under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). Member States must permit all qualifying facilities in order to ensure that they minimize impact on the environment. The permit issued must provide emission limit values for pollutants on this list.

  • IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants
    EU. Emission Limit Values: Annexes V (combustion plants), VI (waste incineration/co-incineration plants), VIII (TiO2 installations), Dir. 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010

    This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.

RoHS - Restriction of Hazardous Substances in Electrical & Electronic Equipment Directive
  • ROHS - Exemptions from Article 4(1) Restrictions, Annexes III & IV
    EU. Exemptions from Art. 4(1) Restrictions (Annexes III & IV), Directive 2011/65/EU (RoHS), as corrected by a corrigendum, OJ L 188, 27 July 2023

    This list contains the application exemptions listed in Annexes III and IV to RoHS (2011/65/EU). Annex III contains applications exempted from the restriction in Article 4(1), while Annex IV lists applications exempted from the restriction in Article 4(1) specific to medical devices and monitoring and control instruments.

  • ROHS Directive - Restricted Substances as per Article 4(1), Annex II
    EU. Restricted Substances Referred to in Article 4(1) (Annex II), Directive 2011/65/EU (RoHS), as amended by Directive 2015/863/EU, 4 June 2015

    This list contains the substances listed in Annex II to the Directive on the restriction of hazardous substances in electrical and electronic equipment (RoHS - 2011/65/EU). Restricted per Art. 4(1) of RoHS, each listed substance includes a maximum concentration value tolerated by weight in homogeneous materials.

Toy Safety Directive
  • Toy Safety Directive - Substances Restricted in Toys
    EU. Substances Restricted in Toys, Directive 2009/48/EC, OJ L 170/1, 30 June 2009, last amended by Directive (EU) 2021/903, 4 June 2021

    This list contains substances whose use in toys is restricted in the European Union in accordance with points 8 and 13, Part III, and Appendices A and C of Annex II (Particular Safety Requirements) to Directive 2009/48/EC on toy safety. List entries include substance name, CAS number, limit values for certain product types and, where applicable, notes on restrictions.

Water Environmental Quality Standards Directive
  • Annex I, Part A - Priority Substances & Pollutants in water
    EU. Environmental Quality Standards (EQS) for Priority Substances: Annex I, Part A, Directive 2008/105/EC, 24 December 2008, amended by Directive 2013/39/EU, 24 August 2013

    This list contains environmental quality standards (EQS), including annual averages and maximum allowable concentrations, for priority substances and certain other pollutants, as provided for in Article 16 of Directive 2000/60/EC establishing a framework for Community action in the field of water policy.

Water Framework Directive
  • Water Framework Directive, Annex X - Priority Substances
    EU. Annex X to Directive 2000/60/EC, Priority Substances in the Field of Water Policy, as amended by Directive 2013/39/EU, OJ L 226/1, 24 August 2013

    This list contains substances identified as priority substances that are targeted for reduction and eventual removal from waste water discharge. The list includes 'priority hazardous substances' which are subject to special restrictions.

Help Help

Substance names and other identifiers

Regulatory process names
Lead compounds
Restriction list, PIC, PIC Annex I
Lead(II) acetate trihydrate
PIC Import notification
Lead(II) nitrate
PIC Import notification
Other identifiers
10099-74-8
PIC Import notification
CAS number
6080-56-4
PIC Import notification
CAS number
Help Help
Group members

This entry / group of substance has the following member substances:

Results list is empty
Name EC / List no. CAS no. Association
Calcines, lead-zinc ore conc.
A thermally agglomerated substance formed by heating a mixture of metal sulfide concentrates, limestone, sand, furnace dross, miscellaneous zinc, lead and copper bearing materials, together with already roasted material to a temperature of 1000°C to 1200°C (538°F to 649°F).
305-411-1 94551-62-9 Official source
Fatty acids, C16-18, lead salts 292-966-7 91031-62-8 Official source
Slags, lead-zinc smelting
Substance formed by processing of chiefly oxidic material with lead and zinc content in a rotating furnace. Consists primarily of Al2O3, CaO, Fe, FeO and SiO2 with other nonferrous compounds as well as carbon.
297-907-9 93763-87-2 Official source
Lead hexafluorosilicate 247-278-1 25808-74-6 Official source
Acetic acid, lead salt, basic 257-175-3 51404-69-4 Official source
Dioxobis(stearato)dilead 260-043-8 56189-09-4 Official source
Lead dibromate 251-796-3 34018-28-5 Official source
Orthoboric acid, lead(2+) salt 252-594-8 35498-15-8 Official source
Lead bis(2,4-dihydroxybenzoate) 255-375-5 41453-50-3 Official source
Plumbate(1-), triiodo-, hydrogen - 43629-00-1 Official source
cesium lead tribromide 835-536-1 15243-48-8 Official source
Plumbate(1-), triiodo-, hydrogen, compd. with N,N-dimethylformamide and methanamine (1:1:1:1) 836-029-8 2101242-86-6 Official source
bis(2,2,6,6-tetramethyl-3,5-heptanedionato)lead(II) 621-125-2 21319-43-7 Official source
lead(II) perchlorate trihydrate 638-754-3 13453-62-8 Official source
Plumbate(1-), triiodo-, hydrogen, compd. with methanimidamide (1:1:1) - 1451592-07-6 Official source
Lead diformate 212-371-8 811-54-1 Official source
Lead oxalate 212-413-5 814-93-7 Official source
Lead tartrate 212-426-6 815-84-9 Official source
Lead(2+) acrylate 212-760-2 867-47-0 Official source
Lead dibenzoate 212-841-2 873-54-1 Official source
Chlorotriethylplumbane 213-925-1 1067-14-7 Official source
Lead(2+) methacrylate 213-949-2 1068-61-7 Official source
Lead distearate 214-005-2 1072-35-1 Official source
Chlorotriphenylplumbane 214-572-6 1153-06-6 Official source
Lead dioxide 215-174-5 1309-60-0 Official source
Orange lead 215-235-6 1314-41-6 Official source
Lead sulphide 215-246-6 1314-87-0 Official source
Lead telluride 215-247-1 1314-91-6 Official source
Lead monoxide 215-267-0 1317-36-8 Official source
Trilead bis(carbonate) dihydroxide 215-290-6 1319-46-6 Official source
Lead, bis(acetato-O)tetrahydroxytri- 215-630-3 1335-32-6 Official source
Lead sulfochromate yellow
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77603.
215-693-7 1344-37-2 Official source
Tetrabutylplumbane 217-649-2 1920-90-7 Official source
Diphenyllead dichloride 218-325-3 2117-69-3 Official source
Acetoxytrimethylplumbane 227-200-2 5711-19-3 Official source
Lead diphosphinate 233-664-7 10294-58-3 Official source
Silicic acid, chromium lead salt 234-347-6 11113-70-5 Official source
Silicic acid, lead salt 234-363-3 11120-22-2 Official source
Lead dipicrate 229-335-2 6477-64-1 Official source
Stearic acid, lead salt 231-068-1 7428-48-0 Official source
Lead sulphite 231-196-8 7446-10-8 Official source
Lead sulphate 231-198-9 7446-14-2 Official source
Lead selenate 231-199-4 7446-15-3 Official source
Trilead bis(orthophosphate) 231-205-5 7446-27-7 Official source
Lead dichloride 231-845-5 7758-95-4 Official source
Lead chromate 231-846-0 7758-97-6 Official source
Lead tungsten tetraoxide 231-849-7 7759-01-5 Official source
Lead difluoride 231-998-8 7783-46-2 Official source
Lead(IV) fluoride 232-012-9 7783-59-7 Official source
Lead hydrogen arsenate 232-064-2 7784-40-9 Official source
Pyrochlore, antimony lead yellow
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77588.
232-382-1 8012-00-8 Official source
Lead dibromide 233-084-4 10031-22-8 Official source
Lead dinitrate 233-245-9 10099-74-8 Official source
Lead(2+) silicate 233-246-4 10099-76-0 Official source
Lead divanadium hexaoxide 233-248-5 10099-79-3 Official source
Lead diiodide 233-256-9 10101-63-0 Official source
Lead molybdate 233-459-2 10190-55-3 Official source
Trilead diarsenate 222-979-5 3687-31-8 Official source
2-ethylhexanoic acid, lead salt 241-076-7 16996-40-0 Official source
Bis(diethyldithiocarbamato-S,S')lead 241-534-6 17549-30-3 Official source
Cyclo-di-μ-oxo(μ-phthalato)trilead 241-894-4 17976-43-1 Official source
Dilead chromate oxide 242-339-9 18454-12-1 Official source
Lead dilactate 242-666-7 18917-82-3 Official source
Lead bis(dimethyldithiocarbamate) 242-748-2 19010-66-3 Official source
Lead tin trioxide 234-844-8 12036-31-6 Official source
Lead oxide sulfate 234-853-7 12036-76-9 Official source
Lead titanium trioxide 235-038-9 12060-00-3 Official source
Lead zirconium trioxide 235-039-4 12060-01-4 Official source
Pentalead tetraoxide sulphate 235-067-7 12065-90-6 Official source
Lead selenide 235-109-4 12069-00-0 Official source
Trilead dioxide phosphonate 235-252-2 12141-20-7 Official source
Tetralead trioxide sulphate 235-380-9 12202-17-4 Official source
Antimony, compound with lead (1:1) 235-536-6 12266-38-5 Official source
Dioxobis(stearato)trilead 235-702-8 12578-12-0 Official source
Lead titanium zirconium oxide 235-727-4 12626-81-2 Official source
Lead chromate molybdate sulfate red
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77605.
235-759-9 12656-85-8 Official source
Lead(2+) 2,4-dinitroresorcinolate 236-498-3 13406-89-8 Official source
Lead diazide 236-542-1 13424-46-9 Official source
Lead thiosulphate 236-780-6 13478-50-7 Official source
Diantimony trilead octaoxide 236-845-9 13510-89-9 Official source
Lead diperchlorate 237-125-7 13637-76-8 Official source
Lead bis(tetrafluoroborate) 237-486-0 13814-96-5 Official source
Lead(2+) tellurium tetraoxide 237-573-3 13845-35-7 Official source
Citric acid, lead salt 238-432-9 14450-60-3 Official source
Lead metaborate 238-762-3 14720-53-7 Official source
Lead 2,4,6-trinitro-m-phenylene dioxide 239-290-0 15245-44-0 Official source
Bis(pentane-2,4-dionato-O,O')lead 239-323-9 15282-88-9 Official source
Lauric acid, lead salt 239-344-3 15306-30-6 Official source
Lead disalicylate 239-839-4 15748-73-9 Official source
Lead dipalmitate 239-870-3 15773-56-5 Official source
Lead hydrogenorthophosphate 239-952-9 15845-52-0 Official source
Lead phosphite 240-176-8 16038-76-9 Official source
Disodium lead N,N'-ethylenebis[N-(carboxylatomethyl)aminoacetate] 245-314-0 22904-40-1 Official source
Lead di(acetate) 206-104-4 301-04-2 Official source
Lead bis(2-ethylhexanoate) 206-107-0 301-08-6 Official source
Trilead dicitrate 208-141-1 512-26-5 Official source
Hexaphenyldiplumbane 221-505-4 3124-01-4 Official source
Lead tetraacetate 208-908-0 546-67-8 Official source
Lead dicyanide 209-742-1 592-05-2 Official source
Lead dithiocyanate 209-774-6 592-87-0 Official source
Tetraphenyllead 209-871-3 595-89-1 Official source
Lead hydroxide 243-310-3 19783-14-3 Official source
Lead 2,4-dihydroxybenzoate 244-118-2 20936-32-7 Official source
Naphthenic acids, lead salts 263-109-4 61790-14-5 Official source
Sulfurous acid, lead salt, dibasic 263-467-1 62229-08-7 Official source
Lead bis(4-cyclohexylbutyrate) 263-663-7 62637-99-4 Official source
Flue dust, lead-refining
By-product of refining lead ores obtained from baghouse and electro-static precipitator and as slurry from scrubbers.
273-809-1 69029-67-0 Official source
Leach residues, zinc ore, lead-contg.
Insoluble substance obtained during dissolution of zinc ores or concentrate in sulfuric acid for the production of zinc sulfate solutions after physical separation such as flotation and filtration.
293-314-4 91053-49-5 Expert judgement (ECHA)
lead compounds with the exception of those specified elsewhere in this Annex - - Expert judgement (ECHA)
Lead(II) bis(methanesulfonate)
BLEIMETHANSULFONAT; LEAD (II) METHANESULFONATE; LEAD METHANE SULPHONATE; LEAD SALT FP
401-750-5 17570-76-2 Expert judgement (ECHA)
Lead carbonate 247-054-3 25510-11-6 Expert judgement (ECHA)
Lead silicate 245-090-4 22569-74-0 Expert judgement (ECHA)
Lead oxide 215-626-1 1335-25-7 Expert judgement (ECHA)
Lead phthalate 229-927-0 6838-85-3 Expert judgement (ECHA)
Lead carbonate 209-943-4 598-63-0 Expert judgement (ECHA)
Lead cyanamidate 244-073-9 20837-86-9 Expert judgement (ECHA)
Lead(II) acetate trihydrate 612-031-2 6080-56-4 Expert judgement (ECHA)
Help Help
Group parents

This substance has been identified as member of the following groups of substances:

Results list is empty
Name EC / List no. CAS no. Association
Lead and its compounds - - Expert judgement (ECHA)