Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

After inhalation: fresh air.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.

Fire-fighting measures

Suitable extinguishing media: Water, Foam, Carbon dioxide (CO2), Dry powder
Unsuitable extinguishing media: For this substance/mixture no limitations of extinguishing agents are given.

Special hazards arising from the substance or mixture: Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.

Advice for firefighters: Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

Observe label precautions. lmmediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Storage conditions
Tightly closed. Dry.
Store at +15°C to +25°C.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection
Safety glasses
Hand protection
full contact:



splash contact:

Glove material: Nitrile rubber
Glove thickness: 0,11 mm Break through time: > 480 min

Glove material: Nitrile rubber
Glove thickness: 0,11 mm Break through time: > 480 min

The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).
This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, lnternet: www.kcl.de).
Other protective equipment
protective clothing
Respiratory protection
required when dusts are generated.
Recommended Filter type: Filter P 1 (acc. to DlN 3181) for solid particles of inert substances The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.


Stability and reactivity

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
The product is chemically stable under standard ambient conditions (room temperature) .
Violent reactions possible with: Strong oxidizing agents


Disposal considerations

According to local/national regulations.