Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 235-120-4
CAS number: 12070-08-5
General advice - If
exposed or concerned: Get medical advice/attention. Show this safety
data sheet to the doctor in attendance.
Inhalation - Remove to
fresh air. If symptoms persist, call a doctor.
Skin contact - Wash off
immediately with soap and plenty of water. If skin irritation or rash
occurs: Get medical advice/attention.
Eye contact - Rinse
thoroughly with plenty of water, also under the eyelids. If symptoms
persist, call a doctor.
Ingestion - Call a
doctor. Clean mouth with water and drink afterwards plenty of water.
Self-protection of the
first aider - First aider: Pay attention to self-protection. See section
" Exposure controls/personal protection" for more information.
Media - Dry sand. Special powder against metal fire. Dry sodium chloride.
extinguishing media - DO NOT USE WATER, FOAM OR CO2.
Special hazards arising
from the substance or mixture
arising from the chemical - None known.
Products - Carbon oxides. TiO2.
Advice for firefighters
equipment and precautions for fire-fighters - In case of fire: Wear
self-contained breathing apparatus.
protective equipment and emergency procedures
Personal precautions -
Avoid generation of dust. Remove all sources of ignition. Use personal
protective equipment as required.
Other information -
Refer to protective measures listed in Sections " Handling and storage"
and "Exposure controls/personal protection".
precautions - Should not be released into the environment. Prevent
product from entering drains.
Methods and material
for containment and cleaning up
Methods for cleaning up
- Take up mechanically, placing in appropriate containers for disposal.
Avoid generation of dust.
Reference to other
sections - Refer to protective measures listed in section "Exposure
controls/personal protection" and " Disposal considerations".
Precautions for safe
Advice on safe handling
- Avoid generation of dust. Ensure adequate ventilation. Keep away from
heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Take precautionary measures
discharges. Fine dust dispersed in air, in sufficient concentrations,
and in the presence of an ignition source is a potential dust explosion
hazard. See section " Exposure controls/personal protection" for more
considerations - Handle in accordance with good industrial hygiene and
safety practice. Keep working clothes separately.
Conditions for safe
storage, including any incompatibilities
Storage Conditions -
Keep container tightly closed in a dry and well-ventilated place.
Use with local exhaust
ventilation. Use only with adequate ventilation to keep airborne levels
of dust below recommended exposure limits.
Eye/face protection -
Wear safety glasses with side shields (or goggles). Eye protection must
conform to standard EN 166.
Hand protection - Wear
butyl or nitrile gloves. Gloves must conform to standard EN 374.
Skin and body
protection - Wear suitable protective clothing. Protective shoes or
- Suitable mask with particle filter P3 (European Norm 143).
Thermal hazards - The
product does not represent a thermal hazard, thus special consideration
is not required.
considerations - Do not eat, drink or smoke when using this product.
Wash hands and face before breaks and immediately after handling the
controls - Dust from exhaust ventilation should be separated out in
order to avoid release to the natural environment. Do not allow into any
sewer, on the ground or into any body of water.
Reactivity - Not
Chemical stability -
Stable under normal conditions.
hazardous reactions - None under normal processing.
Conditions to avoid -
Avoid generating dust; fine dust dispersed in air in sufficient
concentrations, and in the presence of an ignition source is a potential
dust explosion hazard.
- None known
products - None under normal use conditions.
residues/unused products - Dispose of in accordance with local
regulations. Dispose of waste in accordance with environmental
packaging - Dispose of in accordance with federal, state and local
Other information -
Waste codes should be assigned by the user based on the application
for which the product was used.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Sellel veebilehel kasutatakse küpsiseid, et tagada lehe parim kasutus.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again