Registration Dossier

Administrative data

First-aid measures

After inhalation: If breathed in, move person into fresh air. If not breathing give artificial respiration. Call a physician.
After ingestion: If swallowed, wash out mouth with water provided person is conscious. Never give anything by mouth to an unconscious person. Call a physician.
After skin contact: In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothes. Call a physician.
After eye contact: Separate the eyelids with fingers and flush with copious amounts of water for 15 minutes. Call a physician.
Most important symptoms and effects, both acute and delayed
Symptoms an effects of exposure: For information on potential signs and symptoms of exposure
Indication of immediate medical attention and special treatment needed
Treatment: Treat symptomatically.

Fire-fighting measures

Extinguishing media:
Water spray, carbon dioxide, dry chemical powder or appropriate foam.
Avoid high pressure media that could lead to the formation of a potential explosive mixture of dust an air.
Special risks:
Emits toxic fumes under fire conditions: carbon oxides, nitrogen oxides.
As with all dry powders it is advisable to ground mechanical equipment in contact with dry material to dissipate the potential buildup of static electricity.
Special Protective Equipment for Firefighters:
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

Accidental release measures

Procedure(s) of personal precaution(s):
Use personal protective equipment. Avoid breathing dust. Ensure adequate ventilation. Evacuate personnel to safe areas.
Environmental precautions:
Prevent further leakage or spillage. Do not let product enter drains. Place waste in an appropriately labelled sealed container for disposal.
Methods for cleaning up:
Sweep up, place in a bag labelled and tightly closed for disposal according to local / national regulations.
Avoid raising dust. Ventilate area and wash spill site after material pickup is complete.

Handling and storage

7. Handling and storage
Precautions for Safe Handling:
Minimize dust generation and accumulation. Do not breathe dust. Do not get in eyes, on skin or on clothing. Avoid prolonged or repeated exposure. Provide appropriate exhaust ventilation at places where dust is formed. When handling, use appropriate personal protective equipment (see Section 8).Wash thoroughly after handling and before eating or drinking. Wash contaminated clothing before reuse
Releases to the environment should be avoided. Review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure or environmental releases.
Potential points of process emissions of this to the atmosphere should be controlled with dust collectors, HEPA filtration systems or other equivalent controls.
No special conditions are required

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control Parameters
Control exposure to the range of 1 mcg/m3 to 10 mcg/m3 for similitude by Ulipristal acetate.
Engineering controls:
Engineering controls should be used as the primary means to control exposures. General room ventilation is adequate unless the process generates dust, mist or fumes. Keep airborne contamination levels below the exposure limits listed.
Personal protective equipment:
Respiratory protection: An exposure risk assessment should be done in order to choose appropriate respiratory protection. If the applicable Occupational Limit Exposure (OEL) is exceeded, wear an appropriate respirator with a protection factor sufficient to control exposures to below the OEL. Use respirators and components tested and under appropriate government standards such as NIOSH (US) or CEN (EU).
Hand protection: Rubber gloves, according to EU Directive 89/686/EEC and the standard EN374 derived from it.
Eye protection: Chemical safety goggles,

Stability and reactivity

Reactivity; n/a
Chemical stability: Stable under storage conditions.
Possibility of hazardous reactions
Conditions to avoid: Avoid heating.
Incompatible materials: n/a
Hazardous decomposition products: Under fire conditions: carbon oxides, nitrogen oxides.

Disposal considerations

Waste treatment methods:
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Observe all federal, state, and local environmental regulations.
Contaminated packaging must be handled in the same way as the material: it must be managed by an authorized external company according to all federal, state and local regulations. Uncontaminated packaging be treated as household waste or recyclable material. Certificate of the final treatment must be submitted by the external