Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention.

Skin contact: Immediately wipe away the attached material with cloths and the like rapidly. Wash with plenty of soap and water.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician.

Eye contact: Wash the eyes with clean water for at least several minutes (desirably 15 minutes or longer).
(Remove the contact lenses if possible.) and get medical attention by an eye specialist immediately. During washing, fully open the eyelid with fingers and wash in such a way as to let water reach to every corner of the eyeball and eyelid.

Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.
Get medical attention immediately.

Fire-fighting measures

Extinguishing media: Chemical powder extinguisher, foam fire extinguishing media, carbon dioxide, sand.

Unsuitable extinguishing media: Straight stream water. Spattering of flammable liquid may result from spraying water.

Specific extinguishing methods: Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA). Cool container with water spray.

Precautions for fire-fighters: During fire fighting work, wear proper protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Promptly remove possible ignition sources from the vicinity. Use personal protection recommended. Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental precautions: Do not flush to sewer or allow to enter waterways. Surround this product with sandbags and earth/sand and cover it
with an antistatic sheet to prevent diffusion (of smell).

Methods and materials for containment and cleaning up: Absorb this product with inactive materials (example: dry sand, earth) and recover it into a waste material container by using a spark-resistant tool. In the case of large amount, stop leakage with earth/sand to begin with, and, then, recover it.

Handling and storage

Handling:
Technical measures: During handling, be sure to wear proper protective equipment. This product can be charged with static electricity. Take
countermeasures for static electricity removal (grounding, others). Wear antistatic clothes and antistatic shoes to prevent human body electrification.
Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Keep away from heat/sparks/open flames/hot surfaces. - No
smoking. Do not handle the containers harshly in such a way as to make them tumbled, dropped, given a shock, or dragged.

Local/total ventilation: Use the ventilation equipment.

Precautions: Not especially.
Precautions for safe handling: Not especially

Storage:
Storage conditions: Keep away from heat. Keep away from sources of ignition - No smoking.
Protect from sunlight. Store in a well-ventilated place.

Packaging material: Store in tightly closed container

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls: Install eye and body washing facilities near the handling place.
Use closed equipment/machinery or use local ventilation equipment.

Stability and reactivity

Stability: Stable at ambient temperatures and pressures. No reactivity with water. Stable under normal handling conditions.

Hazardous reactions: No data available.

Conditions to avoid: Avoid heat, flames, sparks and ignition sources.

Incompatible materials: No data available.

Hazardous decomposition products: No data available.

Disposal considerations

Disposal methods: When waste materials and waste water are to be treated, collect them into specified containers and entrust the disposal to a disposal contractor. having an industrial waste disposal contractor permit.
Do not use the used containers for other purposes like filling other substances. Be sure to dispose of them after treating the content according to the above description. In case of recycling the container, return the container as it is after fitting a stopper without filling anything into it.

Personal protective equipment Respiratory protection: Gas mask

Hand protection: Organic solvent impermeable protective gloves (Antistatic ones are desirable.)
Eye protection: Protective glasses, goggle, protective face shield
Skin and body protection: Organic solvent impermeable protective clothes, protective shoes
(Antistatic ones are desirable.)

Categories Display