[No public or meaningful name is available]

Guidance on Safe Use

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. Seek medical attention if

symptoms persist.

Emergency measure - Eyes: Flush eyes with plenty of water for at least 15 minutes.

Seek medical attention if symptoms persist.

Emergency measure - Skin: Wash skin with soap and plenty of water. Seek medical

attention if symptoms persist.

Emergency measure - Ingestion: Do not induce vomiting. Seek immediate medical attention if

symptoms persist.

Fire-fighting measures

Recommended extinguishing agent: Water spray or dry chemical.

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg carbon oxides, nitogen

oxides, sulphur oxides and copper oxides).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to

the relevant national or international standards, as

mentioned in section 2.3.00.

Avoid dust formation by damping with water. Absorb spillages

of solutions with a suitable inert material (eg. sand or

soil). Carefully transfer the spillage to waste containers,

or use a sealed industrial vacuum machine.

Containers filled with waste material must be labelled in

the same way as the original substance containers.

Clean the spillage area with water.

Dispose of waste material in accordance with local

regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard EN420

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.

Furthermore, when respiratory protective equipment has to be

used, it must be capable of adequately controlling

exposure, be suitable for the purpose, and conform to the

appropriate international or national standards, such as a

dust mask conforming to EN 149: FFP2.

These measures should be regarded as a minimum.

Storage: Store in a cool, dry, well-ventilated area, protected from

moisture, sources of ignition and direct sunlight.

Keep containers tightly closed when not in use.

Keep from contact with oxidising materials.

Packaging of the substance and or preparation: 80 litre fibre drums with a plastic liner.

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Transport code: None
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.

SpecialProvisions

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported as hazardous.

Dust explosion: Under normal conditions of use this material does not

present a significant explosion hazard. However, like most

organic compounds it is combustible and may form a dust

explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery

fromminor spillages or accidental discharge is not

economically or technically feasible, and such waste

material will be disposed of by incineration. In

principle, it  may be possible to recover larger spillages

of uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The dust hazard will be minimised by appropriate storage and

handling techniques.

Industry - Possibility of destruction: controlled discharge: Not applicable.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

should be scrubbed, because noxious fumes (eg carbon oxides,

nitogen oxides, sulphur oxides and copper oxides) could be

formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Recovery for re-use is not economically feasible.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: End products that have reached the end of their lifespan may

be disposed of by landfill at an authorised tip in

accordance with local regulations.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.