Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: When dust is intensively inhaled, seek medical help
immediately.
Emergency measure - Eyes: In case of contact with eyes rinse thoroughly with plenty of
water and seek medical advice.
Emergency measure - Skin: In case of contact with skin wash off immediately with
plenty of water.
Emergency measure - Ingestion: When swallowed seek medical aid immediately and show the
physician the packaging or the label of the packaging.

Fire-fighting measures

Recommended extinguishing agent: Water spray jet, dry powder, carbon dioxide, foam.

Product arising from burning: Carbon monoxide, carbon dioxide.

Product determined by test: N

Protective equipment: Use self-contained breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Avoid dust formation. Use personal protective clothing. Do
not allow to enter drains or waterways. Take up
mechanically. Clean contaminated floors and objects
thoroughly, observing environmental regulations. When picked
up, treat material as prescribed under heading "Disposal".

Handling and storage

Handling: Avoid the formation and deposition of dust. Provide exhaust
ventilation if dust is formed. Take precautionary measures
against electrostatic loading. Observe the general rules of
industrial fire protection.


General protective measures: do not inhale dust. Avoid
contact with eyes and skin.

Hygiene measures: do not eat, drink or smoke during work
time. Keep away from foodstuffs and beverages. After
worktime and during work intervals the affected skin areas
must be thoroughly cleaned.

Respiratory protection: particle filter half mask,

filter P1.

Hand protection: nitrile rubber gloves.

Glove material: Dermatril« (KCL); Layer thickness: 0,11 mm;
Breakthrough time: > 480 min.

Glove material: nitrile rubber; Layer thickness: 0,5 mm;
Breakthrough time: > 480 min.

Eye protection: safety glasses with side protection shield.
Body protection: protective clothing.


Concentration limits in air:

OEB-Category : OEB 3 (preliminary).

Storage: Keep only in the original container. Keep container tightly
closed and dry.


Storge class 13: non-combustible solids.

Packaging of the substance and or preparation: Fibreboard drum with PE-liner.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport: Non-hazardous good.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None.

Chemical reaction with water: None.

Dust explosion: The product is capable of dust expolsions.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Take up mechanically. Avoid raising dust. Clean contaminated
floors and objects thoroughly, observing environmental
regulations.

Industry - Possibility of neutralisation: Incinerate at high temperature - long burn.

Industry - Possibility of destruction: controlled discharge: Incinerate at high temperatures - long burn.

Industry - Possibility of destruction - incineration: Incinerate at high temperatures - long burn.

Industry - Possibility of destruction - water purification: Do not allow to enter drain or waste water.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.