Skip to Content
Skip to Content

Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud

Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0013-02 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications Authorisation expired
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired
0090-02 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix Commission decided
0090-01 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Formulation of an epoxy resin hardener containing technical MDA Commission decided
0116-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Use of dichromium tris(chromate) for chemical conversion coating applications by aerospace and defence companies and their associated supply chains Commission decided
0057-05 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Nexter Systems Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided
0045-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. Formulation of Mixtures Commission decided
0007-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP within a specialty paint in manufacture of motors for rockets and tactical missiles Authorisation expired
0007-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Industrial use of DBP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Authorisation expired
0126-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 AVX Limited Industrial use in the manufacture of ceramic sheets for the production of multi-layer ceramic capacitors. Commission decided
0006-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Sasol-Huntsman GmbH & Co. KG Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0011-02 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Industrial use of diarsenic trioxide as processing aid in gold electroplating Commission decided
0015-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Yara France Industrial use of diarsenic trioxide as a processing aid to activate the absorption and desorption of carbon dioxide by potassium carbonate from synthesis gas formed in the production of ammonia Authorisation expired
0010-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Nordenhamer Zinkhütte GmbH Industrial use of diarsenic trioxide to produce a copper concentrate in the purification of the leaching solution in a zinc electrowinning process Commission decided
0009-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Boliden Kokkola Oy Use of diarsenic trioxide in the purification of metal impurities from the leaching solution in the zinc electrowinning process Commission decided
0011-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Formulation of diarsenic trioxide into a mixture Commission decided
0219-01 Initial Chromium trioxide 215-607-8 1333-82-0 Husqvarna AB Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. Opinion development
0220-02 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Functional chrome plating with decorative character for transportation applications. Opinion development
0032-04 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis Minerals B.V. in its legal capacity as Only Representative of Elementis Chromium Inc. [application transferred from original Applicant: “Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc.” due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment for applications in the aeronautics and aerospace industries, unrelated to Functional chrome plating or Functional chrome plating with decorative character Commission decided
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided
0146-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel UK Ltd - [Application void as of 01/01/2021] The use of Chromium (VI) Trioxide for the manufacture of Electrolytic Chromium/Chromium oxide Coated Steel (ECCS) Application void as of 01 January 2021
0215-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy
Oras Olesno Sp.z.o.o.
Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications Opinion development
0215-02 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy Pre-treatment (“etching”) of plastic substrates using chromium trioxide for electroplating processes in sanitary applications Opinion development
0218-02 Initial Chromium trioxide 215-607-8 1333-82-0 DOURECA - Produtos Plásticos, Lda. Industrial use of chromium trioxide to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for automotive applications. Opinion development
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Bolta Werke GmbH

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Opinions adopted
0072-03 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. Commission decided
0095-04 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided
0134-02 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS) Commission decided
0211-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel IJmuiden BV; Tata Steel UK Ltd - [Application void as of 01/01/2021] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0032-06 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis Minerals B.V. in its legal capacity as Only Representative of Elementis Chromium Inc. [application transferred from original Applicant: “Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc.” due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Passivation of tin-plated steel (ETP) Commission decided
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided
0100-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Functional chrome plating Commission decided
0102-01 Initial Chromium trioxide 215-607-8 1333-82-0 Clariant Produkte (Deutschland) GmbH Use of chromium trioxide in a catalyst for the dehydrogenation of propane to propene Commission decided
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Opinions adopted
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Opinion development
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided
0055-01 Initial Chromium trioxide 215-607-8 1333-82-0 CROMOMED S.A.
CRONOR S.A.
Cromo Europa S.A.
CHROMATLANTIQUE INDUSTRIEL
VILA ELECTROQUIMICAS.A.
Functional Chrome Plating Commission decided



Categories Display

Märgistatud:

(sisu otsimiseks klõpsake sildil)


Route: .live2