Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud
Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud
This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.
On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.
0150-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Koppers Denmark ApS | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
0029-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Laboratoires Expanscience | Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients | Commission decided | |
0079-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins | Commission decided | |
0079-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins | Commission decided | |
0223-01 | Review report | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. | Opinion development | |
0212-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. | Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry | Opinion development | |
0212-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. | Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character | Opinion development | |
0226-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] | Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® | Opinion development | |
0176-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | LFB BIOMEDICAMENTS | Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. | Opinions adopted | |
0085-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | Life Technologies AS | Use of diglyme as a process chemical in the manufacture of Dynabeads. | Commission decided | |
0184-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Lilly France S.A.S.; Eli Lilly Italia S.p.A. | Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices | Opinions adopted | |
0225-02 | Initial | 4,4'-methylenebis[2-chloroaniline] | 202-918-9 | 101-14-4 | Limburgse Urethane Castings NV | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. | Opinion development | |
0225-01 | Initial | 4,4'-methylenebis[2-chloroaniline] | 202-918-9 | 101-14-4 | Limburgse Urethane Castings NV | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. | Opinion development | |
0011-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Linxens France SA | Formulation of diarsenic trioxide into a mixture | Commission decided | |
0011-02 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Linxens France SA | Industrial use of diarsenic trioxide as processing aid in gold electroplating | Commission decided | |
0189-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Lonza Biologics Porriño, SL.; Lonza Biologics, plc. | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures | Opinions adopted | |
0087-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | MAFLON S.P.A. | Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. | Commission decided | |
0127-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o. | Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines | Commission decided | |
0157-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Merck Biodevelopment SAS FUJIFILM Diosynth Biotechnologies UK Limited | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification process of G-CSF (Granulocyte Colony Stimulating Factor) inclusion bodies | Opinions adopted | |
0175-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Merck KGaA | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (technical grade) as raw material for the manufacturing of GMP Triton® X-100 Emprove® Expert according to IPEC standards | Opinions adopted | |
0091-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | Merck KGaA | Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 | Commission decided | |
0197-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | MERCK MILLIPORE LIMITED | Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. | Opinions adopted | |
0197-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | MERCK MILLIPORE LIMITED | Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). | Opinions adopted | |
0202-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Merckle-GmbH-Ulm | The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product | Opinion development | |
0120-01 | Initial | 1,2-dichloroethane (EDC) | 203-458-1 | 107-06-2 | Microbeads AS | Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste | Commission decided | |
0049-01 | Initial | Ammonium dichromate | 232-143-1 | 7789-09-5 | Micrometal GmbH | The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components | Commission decided | |
0016-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Microporous GmbH | Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries | Commission decided | |
0066-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | MTU Aero Engines AG | Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating | Commission decided | |
0066-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | MTU Aero Engines AG | Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components | Commission decided | |
0125-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | N.V. Ajinomoto OmniChem S.A. | Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. | Commission decided | |
0057-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. | Commission decided | |
0057-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. | Commission decided | |
0057-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. | Commission decided | |
0057-04 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Nexter Mechanics
Nexter Systems | Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. | Commission decided | |
0057-05 | Initial | Dichromium tris(chromate) | 246-356-2 | 24613-89-6 | Nexter Systems | Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. | Commission decided | |
0010-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Nordenhamer Zinkhütte GmbH | Industrial use of diarsenic trioxide to produce a copper concentrate in the purification of the leaching solution in a zinc electrowinning process | Commission decided | |
0061-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | Novartis Ringaskiddy Limited | Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases | Commission decided | |
0162-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Novo Nordisk A/S | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as a solvent/detergent agent for virus inactivation in the manufacture of pharmaceutical products used in the treatment of rare bleeding disorders. | Opinions adopted | |
0159-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Nuova Ompi S.r.l. unipersonale | Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. | Opinions adopted | |
0170-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Octapharma AB | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as component of a chromatography column regeneration solution during the manufacture of a recombinant-derived Factor VIII | Opinions adopted | |
0170-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Octapharma AB Octapharma Pharmazeutika Produktionsgesellschaft m.b.H Octapharma S.A.S. Octapharma Produktionsgesellschaft Deutschland mbH | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as detergent for a virus inactivation step (solvent/detergent treatment) during the manufacture of plasma-derived and recombinant medicinal products | Opinions adopted | |
0111-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | OLON Spa | The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. | Commission decided | |
0111-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | OLON Spa | The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. | Commission decided | |
0215-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Oras Oy | Pre-treatment (“etching”) of plastic substrates using chromium trioxide for electroplating processes in sanitary applications | Opinion development | |
0215-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Oras Oy Oras Olesno Sp.z.o.o. | Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications | Opinion development | |
0108-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | ORGAPHARM | Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate | Commission decided | |
0108-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | ORGAPHARM | Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride | Commission decided | |
0139-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Ortho-Clinical Diagnostics | Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) for use in the manufacture of in vitro diagnostic VITROS® products used for infectious disease screening, endocrinology, and oncology testing. | Opinions adopted | |
0139-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Ortho-Clinical Diagnostics France [application transferred from: “Ortho-Clinical Diagnostics” due to a notified legal entity change]. | Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in two in vitro diagnostic VITROS® products used by professional diagnostic laboratories to detect antibodies to human hepatitis A virus and IgG antibodies to rubella virus. | Opinions adopted | |
0033-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy | Use of chromium trioxide in Cr(VI) based functional plating | Commission decided | |
0019-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Parker Hannifin Manufacturing Netherlands (Filtration & Separation) BV | Use of trichloroethylene (TCE) as a process solvent for the manufacturing of modules containing hollow fibre gas separation membranes | Commission decided | |
0198-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Pfizer Ireland Pharmaceuticals | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals – Post-Production Cleaning. | Opinion development | |
0198-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Pfizer Ireland Pharmaceuticals | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals - Viral Inactivation and associated processes. | Opinion development | |
0192-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Pfizer Manufacturing Belgium NV | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant within a lubricant used in the manufacture of pharmaceutical drug products. | Opinions adopted | |
0206-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Phadia GmbH; B∙R∙A∙H∙M∙S GmbH | Coating Thyroid Stimulating Hormone Receptor onto articles used as components of IVD reagent systems at B∙R∙A∙H∙M∙S GmbH and Phadia GmbH | Opinion development | |
0206-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Phadia GmbH; Thermo Fisher Scientific Baltics UAB | Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB | Opinion development | |
0206-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Phadia GmbH; Thermo Fisher Scientific Baltics UAB | Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB | Opinion development | |
0123-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Opinions adopted | |
0123-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrial workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Opinions adopted | |
0089-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] | Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug | Commission decided | |
0090-02 | Initial | Formaldehyde, oligomeric reaction products with aniline | 500-036-1 | 25214-70-4 | Polynt Composites France | Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix | Commission decided | |
0090-01 | Initial | Formaldehyde, oligomeric reaction products with aniline | 500-036-1 | 25214-70-4 | Polynt Composites France | Formulation of an epoxy resin hardener containing technical MDA | Commission decided | |
0203-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc.; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] | The formulation of a hardener component containing OPE in Aerospace and Defence (A&D) two-part polysulphide sealants. | Opinions adopted | |
0203-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc.; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] | Mixing, by Aerospace and Defence Companies, and their associated supply chains, including the Applicants, of base polysulfide sealant components with OPE-containing hardener, resulting in mixtures containing < 0.1% w/w of OPE for Aerospace and Defence uses that are exempt from authorisation under REACH Art. 56(6)(a). | Opinions adopted | |
0047-01 | Initial | Potassium hydroxyoctaoxodizincatedichromate | 234-329-8 | 11103-86-9 |
PPG Industries (UK) Ltd Finalin GmbH PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Formulation of Mixtures | Commission decided | |
0047-02 | Initial | Potassium hydroxyoctaoxodizincatedichromate | 234-329-8 | 11103-86-9 |
PPG Industries (UK) Ltd Finalin GmbH PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) | Commission decided | |
0054-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Praxair Surface Technologies GmbH | Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. | Commission decided | |
0054-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Praxair Surface Technologies GmbH | Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. | Commission decided | |
0200-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH | Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
0200-04 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH | Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
0200-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH | Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
0200-07 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing | Opinion development | |
0200-06 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) | Opinion development | |
0200-08 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing | Opinion development | |
0200-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; STAT-Dx Life S.L. | Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
0200-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; STAT-Dx Life S.L.; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) | Opinion development | |
0027-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | RAG Aktiengesellschaft, RAG Anthrazit Ibbenbüren GmbH | Use of Tricholoroethylene-containing vulcanising and bonding agents for endless connections and repair of chloroprene rubber coated conveyor belts in underground hard coal mining | Authorisation expired | |
0152-02 | Initial | Anthracene oil | 292-602-7 | 90640-80-5 | Rain Carbon bvba | Use of AO for manufacture of formulations for various industrial uses | Opinions adopted | |
0152-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Rain Carbon bvba | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
0151-02 | Initial | Anthracene oil | 292-602-7 | 90640-80-5 | Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] | Use of AO for manufacture of formulations for various industrial uses | Opinions adopted | |
0151-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
0121-02 | Initial | Pentazinc chromate octahydroxide | 256-418-0 | 49663-84-5 | Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] | Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications | Commission decided | |
0094-01 | Initial | 2,2'-dichloro-4,4'-methylenedianiline (MOCA) | 202-918-9 | 101-14-4 | REACHLaw Ltd in its legal capacity as Only Representative of Suzhou Xiangyuan Special Fine Chemical Co., Ltd | Industrial use of MOCA as a curing agent/chain extender in cast polyurethane elastomer production | Opinions adopted | |
0095-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Functional chrome plating with decorative character | Opinions adopted | |
0095-04 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering | Commission decided | |
0095-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering | Commission decided | |
0095-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Functional Chrome Plating | Commission decided | |
0177-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Rentschler Biopharma SE | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated in a washing buffer applied during a purification step in the manufacture of the monoclonal antibody Dinutuximab beta | Opinions adopted | |
0026-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Richard Geiss GmbH | Use of tricholoroethylene in formulation | Commission decided | |
0026-02 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Richard Geiss GmbH | Use of tricholoroethylene in packaging | Commission decided | |
0056-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Rimex Metals (UK) Ltd | Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel | Commission decided | |
0053-01 | Initial | Chromic acid |
231-801-5 236-881-5 | 13530-68-2 7738-94-5 | Robert Bosch GmbH | Hard chrome plating for gasoline and diesel injection applications | Commission decided | |
0171-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) | Opinions adopted | |
0171-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. | Opinions adopted | |
0160-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for medicinal products (NeoRecormon® and MIRCERA®). | Opinions adopted | |
0171-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. | Opinions adopted | |
0171-04 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. | Opinions adopted | |
0171-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. | Opinions adopted | |
0171-06 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Roche Diagnostics GmbH | Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) | Opinions adopted | |
0084-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | Roche Diagnostics GmbH | Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) | Commission decided | |
0001-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Rolls-Royce plc | The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. | Commission decided | |
0018-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | ROQUETTE Frères | Use of trichloroethylene as a processing aid in the biotransformation of starch to obtain betacyclodextrin | Commission decided | |
0166-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Rousselot bvba | Use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated as a surfactant in the manufacturing of low endotoxin gelatin | Opinions adopted | |
0007-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Roxel (UK Rocket Motors) Ltd | Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles | Authorisation expired | |
0007-03 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | Roxel (UK Rocket Motors) Ltd | Industrial use of DBP within a specialty paint in manufacture of motors for rockets and tactical missiles | Authorisation expired | |
0007-02 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | Roxel (UK Rocket Motors) Ltd | Industrial use of DBP in manufacture of solid propellants and motor charges for rockets and tactical missiles | Authorisation expired | |
0195-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | RSI ChemRep Europe Ltd (O002) OR for OraSure Technologies Inc | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as surfactant in in –vitro diagnostic device developer solution. | Opinion development | |
0115-01 | Initial | Potassium chromate | 232-140-5 | 7789-00-6 | Saes Getters S.p.A. | Use of potassium chromate in the fabrication of alkali metal dispensers for production of photocathodes. | Commission decided | |
0115-03 | Initial | Potassium chromate | 232-140-5 | 7789-00-6 | Saes Getters S.p.A. | Use of alkali metal dispensers containing potassium chromate for production of photocathodes. | Commission decided | |
0115-04 | Initial | Sodium chromate | 231-889-5 | 7775-11-3 | Saes Getters S.p.A. | Use of alkali metal dispensers containing sodium chromate for production of photocathodes. | Commission decided | |
0115-02 | Initial | Sodium chromate | 231-889-5 | 7775-11-3 | Saes Getters S.p.A. | Use of sodium chromate in the fabrication of alkali metal dispensers for production of photocathodes. | Commission decided | |
0209-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Safran Aircraft Engines | Industrial use of chromium trioxide-based mixtures for the surface treatment of legacy spare parts of military aircraft engines, including safety-critical parts whose failure endangers airworthiness | Opinion development | |
0065-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] | Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness | Commission decided | |
0214-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Salzgitter Flachstahl GmbH | Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal | Opinion development | |
0214-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Salzgitter Flachstahl GmbH | Pretex® functional chrome plating using chromium trioxide in closed reactor systems for the establishment of adjustable hemispherical surface structures on working rolls applied in the steel industry for the manufacture of cold-rolled, high quality textured sheet metal | Opinion development | |
0156-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Sanofi Pasteur | Use of Octoxynol-9 for virus splitting and inactivation step in the manufacturing of influenza vaccines | Opinions adopted | |
0199-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Sanquin Reagents B.V. | Use of Triton™ X-100 (4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated) in formulation of components for IVD kits. | Opinions adopted | |
0006-01 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | Sasol-Huntsman GmbH & Co. KG | Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride | Commission decided | |
0131-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Schell GmbH & Co. KG Armaturentechnologie | Functional chrome plating with decorative character for sanitary applications | Opinions adopted | |
0141-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | SEBIA | Industrial use of 4-tert-OPnEO for its detergent properties in the production of electrophoresis gels in view of ensuring the positioning of specific proteins necessary for the interpretation of results of gel electrophoresis in vitro diagnostic tests. | Opinions adopted | |
0141-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | SEBIA | Industrial use of 4-tert-OPnEO for its detergent properties resulting in cellular lysis and protein interactions rupture and required for the production of reagents involved in the determination of proteins of interest in gel and capillary electrophoresis IVD tests. | Opinions adopted | |
0141-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | SEBIA | Industrial use of 4-tert-OPnEO for its wetting detergent properties in the production of buffers, reagents and gel supports allowing the dissolution, the dilution and the good spreading of substrates and reagents, necessary to optimize the functioning and the sensitivity of gel electrophoresis in vitro diagnostic tests. | Opinions adopted | |
0142-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | SEBIA | Industrial use of 4-NPnEO for its detergent properties in the production of buffers and reagents in view of ensuring the positioning of specific proteins necessary for the interpretation of gel electrophoresis in vitro diagnostic tests results based on the determination of isoenzymes. | Opinions adopted | |
0191-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Sekisui S-lec BV Roermond | Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass | Opinions adopted | |
0154-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Siemens Healthcare Diagnostics Products GmbH | Use of OPE in formulation of IVD- wash solutions | Opinions adopted | |
0154-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Siemens Healthcare Diagnostics Products GmbH | Use of IVD-wash solutions on diagnostic analyser systems | Opinions adopted | |
0154-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Siemens Healthcare Diagnostics Products GmbH | Use of OPE in isolation of protein from recombinant cell cultures for the production of IVD-kits (protein cell extraction) | Opinions adopted | |
0154-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Siemens Healthcare Diagnostics Products GmbH | Use of IVD-kit reagents on diagnostic analyser systems | Opinions adopted | |
0154-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Siemens Healthcare Diagnostics Products GmbH | Use of OPE in formulation of IVD-kit reagents | Opinions adopted | |
0173-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Siemens Healthcare Diagnostics Products Ltd | Use of OPE as detergent in the production of bead components for in-vitro diagnostic kits for an immunoassay platform | Opinions adopted | |
0137-01 | Initial | Sodium dichromate | 234-190-3 |
10588-01-9 7789-12-0 | SOCIETA' CHIMICA BUSSI S.P.A. | Use of sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacturing of sodium chlorite. | Commission decided | |
0048-01 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | SOFRADIR | Industrial use of potassium dichromate-based mixtures during the steps of initial and final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology | Commission decided | |
0048-02 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | SOFRADIR | Industrial use of potassium dichromate based mixture during the etching of both InSb substrate sides during the production of optoelectronic components gathering a readout and an infrared detecting circuit with the InSb technology | Commission decided | |
0039-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | SOLVAY PORTUGAL - PRODUTOS QUIMICOS S.A. | Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite | Commission decided | |
0072-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Souriau sas | Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. | Commission decided | |
0072-06 | Initial | Sodium dichromate | 234-190-3 |
10588-01-9 7789-12-0 | Souriau sas; TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). | Commission decided | |
0072-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Souriau sas Amphenol Limited AMPHENOL SOCAPEX ITT Cannon GmbH TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. | Commission decided | |
0072-07 | Initial | Sodium dichromate | 234-190-3 |
10588-01-9 7789-12-0 | Souriau sas Amphenol Limited AMPHENOL SOCAPEX | Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. | Commission decided | |
0072-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Souriau sas Amphenol Limited AMPHENOL SOCAPEX ITT Cannon GmbH Connecteurs Electriques Deutsch TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). | Commission decided | |
0022-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | SPOLANA a.s. | Use as an extraction solvent in caprolactam production | Commission decided | |
0129-01 | Review report | Trichloroethylene | 201-167-4 | 79-01-6 | SPOLANA s.r.o. [name of applicant in the original application: SPOLANA a.s. updated due to a notified change of corporate name] | Use as an extraction solvent in caprolactam production | Opinions adopted | |
0220-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | SRG Global Ibi, S.L. | Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications. | Opinion development | |
0220-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | SRG Global Ibi, S.L. | Functional chrome plating with decorative character for transportation applications. | Opinion development | |
0213-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Steel Color S.p.A. | Use of chromium trioxide as colouring and hardening agent for stainless steel plates | Opinion development | |
0164-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Swedish Orphan Biovitrum | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in manufacture of biopharmaceuticals by Swedish Orphan Biovitrum AB. | Opinions adopted | |
0158-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Swords Laboratories | Industrial use of the substance as a surfactant in the purification of the biopharmaceutical drug Orencia, used for the treatment of Rheumatoid Arthritis, Juvenile Idiopathic Arthritis and Adult Psoriatic Arthritis | Opinions adopted | |
0211-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tata Steel IJmuiden BV; Tata Steel UK Ltd. | Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) | Opinions adopted | |
0211-02 | Initial | Sodium dichromate | 234-190-3 | 10588-01-9 | Tata Steel IJmuiden BV; Tata Steel UK Ltd. | Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) | Opinions adopted | |
0146-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tata Steel UK Ltd | The use of Chromium (VI) Trioxide for the manufacture of Electrolytic Chromium/Chromium oxide Coated Steel (ECCS) | Opinions adopted | |
0190-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Teva Baltics UAB | The use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated (TritonX-100) as a nonionic surfactant for bacteria cells disruption and washing of inclusion bodies in Biological Drug Substance manufacturing process | Opinions adopted | |
0135-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Thyssenkrupp Electrical Steel GmbH; Thyssenkrupp Electrical Steel UGO S.A.S. | Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers | Opinions adopted | |
0134-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ThyssenKrupp Rasselstein GmbH | Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) | Commission decided | |
0134-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ThyssenKrupp Rasselstein GmbH | Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS) | Commission decided | |
0069-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Topocrom GmbH | TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. | Commission decided | |
0074-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | TOTAL RAFFINERIE MITTELDEUTSCHLAND GMBH | Use of sodium dichromate as a corrosion inhibitor in an ammonia absorption deep cooling system of a methanol synthesis plant. | Commission decided | |
0221-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | U. S. Steel Košice, s.r.o. | Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). | Opinion development | |
0221-02 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | U. S. Steel Košice, s.r.o. | Use of Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP). | Opinion development | |
0073-01 | Initial | Ammonium dichromate | 232-143-1 | 7789-09-5 | Veco B.V. | Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. | Commission decided | |
0196-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Vetter Pharma-Fertigung GmbH & Co. KG | Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers (syringes and cartridges) used as primary packaging material for 44 medicinal products of several pharmaceutical companies listed in the confidential Appendix 1 to the AoA. These products cover several therapeutic areas, and approx. 40 % of them are listed on the WHO Model List of Essential Medicines (EML). | Opinions adopted | |
0161-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Vetter Pharma-Fertigung GmbH & Co. KG | Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for two specific medicinal products (NutropinAq® and Lucentis®) of one pharmaceutical company. | Opinions adopted | |
0216-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Viega Supply Chain GmbH & Co KG | Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes | Opinion development | |
0216-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Viega Supply Chain GmbH & Co KG | Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright silvery appearance for sanitary applications | Opinion development | |
0122-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 |
VINYLOOP FERRARA S.p.A. | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Withdrawn | |
0122-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 |
VINYLOOP FERRARA S.p.A. | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrials workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Withdrawn | |
0008-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Authorisation expired | |
0008-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles | Authorisation expired | |
0014-02 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Vlisco Netherlands BV | Use of trichloroethylene as a solvent in a process to recover and purify resin from process water | Commission decided | |
0014-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Vlisco Netherlands BV | Use of trichloroethylene as a solvent for the removal and recovery of resin from dyed cloth | Commission decided | |
0188-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Wallac Oy | Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) for use in the assay buffer for the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity | Opinions adopted | |
0163-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Wallac Oy | Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in enhancement solutions and DELFIA standard and maintenance solutions as a critical ingredient for detection process while measuring europium (or other lanthanide) content in In Vitro Diagnostic assays and RUO products or during maintenance of instruments | Opinions adopted | |
0163-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Wallac Oy | Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) into enhancement solutions and DELFIA standard and maintenance solutions used in In Vitro Diagnostic assays and RUO products as well as maintenance of instruments as a critical ingredient for detection process while measuring europium (or other lanthanide) content of the assay solution | Opinions adopted | |
0188-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Wallac Oy | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) in the assay buffer of the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity | Opinions adopted | |
0015-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Yara France | Industrial use of diarsenic trioxide as a processing aid to activate the absorption and desorption of carbon dioxide by potassium carbonate from synthesis gas formed in the production of ammonia | Authorisation expired | |
0193-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Yposkesi | Use of 4-tert-OPnEO for its non-ionic detergent properties for the cell membrane lysis and viral clearance during the development and manufacturing of viral vectors in medicinal products dedicated to human use (Investigational and Authorized Advanced Therapy Medicinal Product). | Opinions adopted | |
0119-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ZF Friedrichshafen AG | Functional chrome plating of piston rods for automotive and rail applications | Commission decided | |
0100-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ZF Luftfahrttechnik GmbH | Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) | Commission decided | |
0100-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ZF Luftfahrttechnik GmbH | Functional chrome plating | Commission decided | |
0101-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | ZF Luftfahrttechnik GmbH | Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films | Commission decided | |
0201-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A. | Industrial use as a viral inactivating agent in the manufacture of two veterinary biologic drugs for treatment of osteoarthritis in cats and dogs | Opinion development | |
0201-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A. | Professional use as a surfactant in kits, kit reagents and buffer solutions in 18 veterinary In Vitro Diagnostic devices (IVDs) including one SERELISA, six ProFLOK, six WITNESS and five VetScan. The use is carried out by professional users in diagnostic laboratories and veterinary clinics to detect certain diseases in pets and farm animals | Opinion development | |
0201-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A.; Delpharm Biotech | Industrial use in formulation of kits, kit reagents and buffer solutions in two WITNESS and three SERELISA veterinary In Vitro Diagnostic devices (IVDs) used for detecting certain diseases in pets and farm animals | Opinion development | |
0201-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A.; Delpharm Biotech | Industrial use as a surfactant in a lysis buffer for the release of proteins and antigens from biological material used in the manufacture of three SERELISA veterinary In Vitro Diagnostic devices (IVDs) for detecting infectious disease in farm animals | Opinion development | |
Categories Display
Route: .live1