Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud

Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud

Autoriseerimistaotluste teemalised vastuvõetud arvamused ja eelnevad arutelud

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0141-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its wetting detergent properties in the production of buffers, reagents and gel supports allowing the dissolution, the dilution and the good spreading of substrates and reagents, necessary to optimize the functioning and the sensitivity of gel electrophoresis in vitro diagnostic tests. Commission decided Details
0140-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO in view of controlling the amount of non-specific reactions in the production of in-vitro diagnostic reagents (STA® - Liatest® D-Di assays). Commission decided Details
0200-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Commission decided Details
0200-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Commission decided Details
0165-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Eli Lilly Kinsale Limited Industrial use of a 4-tert-octylphenol ethoxylate compound, as a patient safety viral inactivation reagent in the manufacture of human medicines produced from biological systems Commission decided Details
0065-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness Commission decided Details
0072-03 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. Commission decided Details
0219-01 Initial Chromium trioxide 215-607-8 1333-82-0 Husqvarna AB Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. Commission decided Details
0072-01 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
ITT Cannon GmbH
Connecteurs Electriques Deutsch
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided Details
0072-04 Initial Potassium dichromate 231-906-6 7778-50-9 Connecteurs Electriques Deutsch
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided Details
0072-06 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Souriau sas;
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided Details
0072-02 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
ITT Cannon GmbH
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided Details
0072-05 Initial Potassium dichromate 231-906-6 7778-50-9 Connecteurs Electriques Deutsch Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided Details
0072-07 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided Details
0057-03 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. Commission decided Details
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided Details
0057-01 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. Commission decided Details
0351-01 Initial Potassium dichromate 231-906-6 7778-50-9 TURDUS TESTERS OF CAPACITY Industrial use of a potassium dichromate-based mixture for the manufacture of single-use chemical breathalysers Opinion development Details
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited - [Decision discontinued as of 01/01/2021] Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Discontinued as of 01 January 2021 Details
0106-01 Initial Ammonium dichromate 232-143-1 7789-09-5 BAE Systems (Operations) Limited – [Decision discontinued as of 01/01/2021]
Qioptiq Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of Ammonium Dichromate in the process of manufacturing holographic combiners for diffractive head-up displays intended to be used in military aircrafts Discontinued as of 01 January 2021 Details
0090-02 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix Commission decided Details
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided Details
0358-01 Review report Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of printed circuit board. Opinion development Details
0285-01 Initial Chromium trioxide 215-607-8 1333-82-0 Liebherr-Aerospace Lindenberg GmbH Industrial use of chromium trioxide for functional chrome plating of actuation and landing gear systems for the aviation industry. Opinions adopted Details
0254-01 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for functional chrome plating of aircraft safety critical steel ball screws used in airplane's actuators, to decrease friction ratio, and enhance wear, corrosion, and endurance resistance, enabling targeted service life Opinions adopted Details
0322-01 Initial Chromium trioxide 215-607-8 1333-82-0 ArcelorMittal Belgium NV/SA Industrial use of chromium trioxide for functional chrome plating of work rolls for use in the production of flat metal products Opinions adopted Details
0306-01 Initial Chromium trioxide 215-607-8 1333-82-0 GALVANICA PASOTTI THEA S.R.L.; CHINO COLOR S.r.l. Industrial use of chromium trioxide for functional chrome plating with decorative character of items for the sanitary, hydro-sanitary, taps, household industries, and various other applications (such as handles/locks, pneumatic elements and electrical connection). Opinions adopted Details
0279-01 Initial Chromium trioxide 215-607-8 1333-82-0 GalvanoPlus Srl Industrial use of chromium trioxide for functional chrome plating with decorative character of sanitary equipment Opinions adopted Details
0307-01 Initial Chromium trioxide 215-607-8 1333-82-0 VINZIA F.lli S.p.A. Industrial use of chromium trioxide for functional chrome plating with the decorative character of brass or stainless-steel drain components for the tap industry to provide thickness, corrosion resistance Opinions adopted Details
0346-02 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Landing Systems; TSM; REVETEMENT DE CHROME DUR; SOCIETE TECHNIQUE D'ETUDES ET DE GESTION; SABENA TECHNICS BOD; OMA S.P.A.; Metal Sud s.r.l; Safran Landing Systems Services; Compañia Española de Sistemas Aeronauticos, (C.E.S.A.), S.A.U.; Aerostar S.A. Industrial use of chromium trioxide for hard chrome plating in the manufacturing and the repairing of landing gear parts exclusively supplied by Safran Landing Systems and for which there is not yet potential alternatives identified as part of the substitution process. Opinion development Details
0346-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Landing Systems; TSM; REVETEMENT DE CHROME DUR; SOCIETE TECHNIQUE D'ETUDES ET DE GESTION; SABENA TECHNICS BOD; OMA S.P.A.; Metal Sud s.r.l; Safran Landing Systems Services; Compañia Española de Sistemas Aeronauticos, (C.E.S.A.), S.A.U.; Aerostar S.A. Industrial use of chromium trioxide for hard chrome plating to provide key functional properties such as wear resistance (...) in the manufacturing of landing and braking system parts for aeronautical applications exclusively supplied by Safran Landing Systems without technical limitations with the identified alternative. Opinion development Details
0255-01 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide for high ratio aspects inside hard chromium coating of firearms barrel bores subject to thermal, mechanical and chemical stresses, in order to provide wear resistance properties, as well as low friction coefficient, hardness, resistance to corrosion and gas erosion properties. Opinions adopted Details
0312-02 Initial Chromium trioxide 215-607-8 1333-82-0 Metalplast sas; CO.BE. sas di Colombo Nadia e Flavia Industrial use of chromium trioxide for plating on plastic materials to create a long-lasting high durability chromium decorative surface in the electroplating process for various applications. Opinion development Details
0285-02 Initial Chromium trioxide 215-607-8 1333-82-0 Liebherr-Aerospace Lindenberg GmbH Industrial use of chromium trioxide for surface treatment of aluminium alloys for applications in the aerospace industries unrelated to functional chrome plating Opinions adopted Details
0254-02 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for the chromic acid anodizing of aluminium spars as critical surface preparation phase for bonding with aircraft safety critical propeller blades to secure reliable bonding performance and enhance spars corrosion resistance Opinions adopted Details
0260-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sarrel Sarreliber - Transformação de Plásticos e Metais, S.A Industrial use of chromium trioxide for the etching of plastics materials, as a pre-treatment step of the electroplating process, for automotive applications mostly Opinions adopted Details
0257-01 Initial Chromium trioxide 215-607-8 1333-82-0 QUALIPAC Aurillac; Etablissements R.GRAINDORGE Industrial use of chromium trioxide for the etching of polypropylene (PP) substrates, as a pre-treatment step of the electroplating process, for the luxury sector and other applications Opinions adopted Details
0212-01 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character Opinions adopted Details
0321-01 Initial Chromium trioxide 215-607-8 1333-82-0 LMC S.r.l. Industrial use of Chromium Trioxide for the functional chrome plating of food slicer’s circular blades. Opinion development Details
0313-01 Initial Chromium trioxide 215-607-8 1333-82-0 BWI Poland Technologies Sp. z. o.o Industrial use of chromium trioxide for the functional chrome plating of shock absorber rods and strut rods, cylinders and reservoir tubes mounted on passive or semi-active dampers for automotive applications Opinions adopted Details
0295-01 Initial Chromium trioxide 215-607-8 1333-82-0 Ugitech Saint-Etienne Industrial use of chromium trioxide for the functional chrome plating of stainless-steel bars, mainly designed to be cylinder rods, used in aggressive and corrosive environments in diverse sectors such as transportation Opinions adopted Details
0212-02 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry Opinions adopted Details
0318-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sirio Galv S.R.L Industrial use of Chromium Trioxide for the functional chrome plating with decorative character for different applications. Commission decided Details
0290-01 Initial Chromium trioxide 215-607-8 1333-82-0 Fir Italia S.p.A. Industrial use of chromium trioxide for the functional chrome plating with decorative character of items for the hydrosanitary sector Opinions adopted Details
0292-01 Initial Chromium trioxide 215-607-8 1333-82-0 Artech SRL Industrial use of chromium trioxide for the functional chrome plating with decorative character of steel tubes and plates incorporated in machines for the agri-food industry, leisure, household furniture and automotive industries Opinions adopted Details
0263-01 Initial Chromium trioxide 215-607-8 1333-82-0 Orelec Industrial use of chromium trioxide for the hard chrome plating of injection moulds in order to provide hardness, wear resistance and good demoulding properties, critical for the manufacture of high-quality plastic parts. Opinions adopted Details
0281-01 Initial Chromium trioxide 215-607-8 1333-82-0 ELECTRO-DUROCROM.S.L Industrial use of chromium trioxide for the hard chromium plating of moulds, dies and custom-made finished parts on any metal base, in order to provide hardness, wear resistance, corrosion resistance, demoulding properties, low friction ratio, for the manufacture of high-quality metal parts in several sectors as automotive, pharmaceutical, food and packaging industries Opinions adopted Details
0287-01 Initial Chromium trioxide 215-607-8 1333-82-0 Bacrom S.L. Industrial use of chromium trioxide for the hard plating of various end-products made of steel for the industry manufacturers to provide hardness, corrosion resistance, low friction coefficient, good surface roughness, thickness, and excellent surface condition Opinions adopted Details
0324-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tecnofiniture S.r.l. Industrial use of chromium trioxide for the hard-chrome plating of a wide variety of items with large dimensions and complex geometries used in energy generation and supply, off-shore oil and gas extraction and manufacturing industries. Opinions adopted Details
0309-01 Initial Chromium trioxide 215-607-8 1333-82-0 Cromatura Staff Srl Industrial use of chromium trioxide for the plating of brass valves destined for applications involving industrial and technical fluids and brass fittings for oxygen cylinders Opinions adopted Details