Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 811-852-5 | CAS number: 1792219-00-1
Guidance on Safe Use
Administrative data
First-aid measures
- Following inhalation:
Fresh air.
- Following skin contact:
Take off immediately all contaminated clothing. Rinse skin with water/ shower.
- Following eye contact:
Rinse out with plenty of water. Remove contact lenses.
- Following ingestion: Make victim drink water (two glasses at most). Consult doctor if feeling unwell.
- Most important symptoms and effects: We have no description of any toxic symptoms.
Fire-fighting measures
- Suitable extinguishing media:
Water, Foam, Carbon dioxide (CO2), Dry powder
- Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
- Special hazards arising from the substance or mixture:
Combustible. Development of hazardous combustion gases or vapours possible in the event of fire. Fire may cause evolution of: nitrogen oxides
- Advice for fire fighter: In the event of fire, wear self-contained breathing apparatus. Suppress (knock down) gases/vapours/mists with a water spray jet.
Prevent fire extinguishing water from contaminating surface water or the ground water system.
Accidental release measures
- Personal precautions:
Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section "personel protection".
- Environmental precautions:
Do not flush into surface water or sanitary sewer system.
- Methods and material for containment and cleaning up:Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections "Handling and storage" and "stability and reactivity"). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.
Handling and storage
- Precautions for safe handling:
Observe label precautions.Change contaminated clothing. Wash hands after working with substance.
- Conditions for safe storage, including any incompatibilities: Tightly closed. Dry. Recommended storage temperature see product label.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
- Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
- Personal protective equipment
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye protection: Safety glasses
Hand protection: full contact
Glove material: Nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min
splash contact
Glove material: Nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example:KCL 741 Dermatril® L(full contact);KCL 741 Dermatril® L(splash contact).
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Respiratory protection: required when dusts are generated.
Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
- Environmental exposure controls
General advice: Do not flush into surface water or sanitary sewer system.
Stability and reactivity
1. Reactivity
: The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
2. Chemical stability
: The product is chemically stable under standard ambient conditions (room temperature).
3. Possibility of hazardous reactions
Hazardous reactions: Violent reactions possible with: Strong oxidizing agents
Caution! In contact with nitrites, nitrates, nitrous acid possible liberation of nitrosamines!
4. Conditions to avoid
: no information available
5. Incompatible materials
: no information available
6. Hazardous decomposition products: see firefighting measures
Disposal considerations
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
