Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-807-4 | CAS number: 134283-49-1
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Inhalation: Move exposed person to fresh air. Keep person warm and at rest. If
not breathing, if breathing is irregular or if respiratory arrest occurs,
provide artificial respiration or oxygen by trained personnel. Get
medical attention if symptoms occur. If unconscious, place in
recovery position and get medical attention immediately. Maintain an
open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Ingestion: Wash out mouth with water. Move exposed person to fresh air.
Keep person warm and at rest. If material has been swallowed and
the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be
dangerous. Do not induce vomiting unless directed to do so by
medical personnel. If vomiting occurs, the head should be kept low
so that vomit does not enter the lungs. Get medical attention if
symptoms occur. Never give anything by mouth to an unconscious
person. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact: Flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the
upper and lower eyelids. Check for and remove any contact lenses.
Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.
not breathing, if breathing is irregular or if respiratory arrest occurs,
provide artificial respiration or oxygen by trained personnel. Get
medical attention if symptoms occur. If unconscious, place in
recovery position and get medical attention immediately. Maintain an
open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Ingestion: Wash out mouth with water. Move exposed person to fresh air.
Keep person warm and at rest. If material has been swallowed and
the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be
dangerous. Do not induce vomiting unless directed to do so by
medical personnel. If vomiting occurs, the head should be kept low
so that vomit does not enter the lungs. Get medical attention if
symptoms occur. Never give anything by mouth to an unconscious
person. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact: Flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the
upper and lower eyelids. Check for and remove any contact lenses.
Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media: In case of fire, use water spray (fog), foam, dry chemical or CO2.
Unsuitable extinguishing media: None known.
Special hazards arising from the substance or mixture
Hazards from the substance or mixture: No specific fire or explosion hazard.
Hazardous combustion products: No specific data.
Advice for firefighters
Special precautions for firefighters: Promptly isolate the scene by removing all persons from the vicinity
of the incident if there is a fire. No action shall be taken involving any
personal risk or without suitable training.
Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and selfcontained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Suitable extinguishing media: In case of fire, use water spray (fog), foam, dry chemical or CO2.
Unsuitable extinguishing media: None known.
Special hazards arising from the substance or mixture
Hazards from the substance or mixture: No specific fire or explosion hazard.
Hazardous combustion products: No specific data.
Advice for firefighters
Special precautions for firefighters: Promptly isolate the scene by removing all persons from the vicinity
of the incident if there is a fire. No action shall be taken involving any
personal risk or without suitable training.
Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and selfcontained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Accidental release measures
Personal precautions, protective equipment and emergency procedures: No action shall be taken involving any personal risk or without suitable training. Keep unnedessary and unprotected personnel from entering. Provide adequate ventilation. Put on appropriate personal equipment. Hazard of slipping on spilt product.
Environmental precautions: Move containers from spill area. Prevent entry into sewers, water
courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container.
Dispose of via a licensed waste disposal contractor.
Avoid dispersal of spilt material and runoff and contact with soil,
waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil
Environmental precautions: Move containers from spill area. Prevent entry into sewers, water
courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container.
Dispose of via a licensed waste disposal contractor.
Avoid dispersal of spilt material and runoff and contact with soil,
waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil
Handling and storage
Manufacture and use of this chemical intermediate takes place under strictly controlled conditions, as described in Art. 17/18 REACH. The substance is rigorously contained during manufacturing and use and appropriate risk management measures including PPE (i.g. during charging or sampling) are applied. Occupational exposure is reduced to a minimum and well controlled by measurements. A management system covering all general aspectsof a chemical production is in place, especially cleaning and maintenance of plants and equipment. An authorisation scheme based on instructions covering the whole process ensures that only trained and authorised staff handles the substance.
Precautions for safe handling: Put on appropriate personal protective equipment.
Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash
hands and face before eating, drinking and smoking. Do not ingest.
Avoid contact with eyes, skin and clothing. Keep in the original
container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous.
The product is registered with strictly controlled conditions as defined in Article 17(3) or 18(4) of
the regulation (EC) no. 1907/2006 (REACH regulation) and must therefore be handled as such. Refer to industry
guidance prepared by Concawe/Cefic/EFCG for advice on the confirmation of strictly controlled conditions.
Conditions for safe storage, including any incompatibilities: Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials and food and
drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabelled
containers. Use appropriate containment to avoid environmental contamination.
Precautions for safe handling: Put on appropriate personal protective equipment.
Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash
hands and face before eating, drinking and smoking. Do not ingest.
Avoid contact with eyes, skin and clothing. Keep in the original
container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous.
The product is registered with strictly controlled conditions as defined in Article 17(3) or 18(4) of
the regulation (EC) no. 1907/2006 (REACH regulation) and must therefore be handled as such. Refer to industry
guidance prepared by Concawe/Cefic/EFCG for advice on the confirmation of strictly controlled conditions.
Conditions for safe storage, including any incompatibilities: Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials and food and
drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabelled
containers. Use appropriate containment to avoid environmental contamination.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- The producer uses packaging for the product, which meets the requirements for products with a hazard potential as far as
tightness and stability are concerned. Consequently transport is possible without increased danger as long as attention is paid to the usual
measures such as stack height, protection against falling and correct labelling. In case of partially fractured containers, these must be kept closed carefully o any transport, in order to prevent spillage.
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- The producer uses packaging for the product, which meets the requirements for products with a hazard potential as far as
tightness and stability are concerned. Consequently transport is possible without increased danger as long as attention is paid to the usual
measures such as stack height, protection against falling and correct labelling. In case of partially fractured containers, these must be kept closed carefully o any transport, in order to prevent spillage.
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- --
- Chemical name:
- --
- Labels:
- --
Special provisions / remarks
- Remarks:
- The producer uses packaging for the product, which meets the requirements for products with a hazard potential as far as
tightness and stability are concerned. Consequently transport is possible without increased danger as long as attention is paid to the usual
measures such as stack height, protection against falling and correct labelling. In case of partially fractured containers, these must be kept closed carefully o any transport, in order to prevent spillage.
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- --
- Chemical name:
- --
- Labels:
- --
Special provisions / remarks
- Remarks:
- The producer uses packaging for the product, which meets the requirements for products with a hazard potential as far as
tightness and stability are concerned. Consequently transport is possible without increased danger as long as attention is paid to the usual
measures such as stack height, protection against falling and correct labelling. In case of partially fractured containers, these must be kept closed carefully o any transport, in order to prevent spillage.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Exposure limit values: not available
Recommended monitoring procedures : If this product contains ingredients with exposure limits, personal,
workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control
measures and/or the necessity to use respiratory protective
equipment. Reference should be made to European Standard EN
689 for methods for the assessment of exposure by inhalation to
chemical agents and national guidance documents for methods for
the determination of hazardous substances.
Exposure controls
Risk management measures
Occupational exposure controls
Technical measures: If this product contains ingredients with exposure limits, use process
enclosures, local exhaust ventilation or other engineering controls to
keep worker exposure below any recommended or statutory limits.
Personal protection measures
Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with
an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Recommended: Full mask with type ABEK-P2 filter
Hand protection: Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. After
contamination with product change the gloves immediately and
dispose of them according to relevant national and local regulations
Recommended: (< 1 hour) Polyvinyl chloride - PVC , butyl rubber ,
Nitrile rubber - NBR
Eye protection: Safety eyewear complying with an approved standard should be
used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts.
Recommended: Tightly fitting safety goggles.
Skin protection: Personal protective equipment for the body should be selected
based on the task being performed and the risks involved and should
be approved by a specialist before handling this product.
Recommended: Wear protective clothing.
Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the
end of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Environmental exposure controls
Technical measures : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume
scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable level.
Exposure limit values: not available
Recommended monitoring procedures : If this product contains ingredients with exposure limits, personal,
workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control
measures and/or the necessity to use respiratory protective
equipment. Reference should be made to European Standard EN
689 for methods for the assessment of exposure by inhalation to
chemical agents and national guidance documents for methods for
the determination of hazardous substances.
Exposure controls
Risk management measures
Occupational exposure controls
Technical measures: If this product contains ingredients with exposure limits, use process
enclosures, local exhaust ventilation or other engineering controls to
keep worker exposure below any recommended or statutory limits.
Personal protection measures
Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with
an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Recommended: Full mask with type ABEK-P2 filter
Hand protection: Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. After
contamination with product change the gloves immediately and
dispose of them according to relevant national and local regulations
Recommended: (< 1 hour) Polyvinyl chloride - PVC , butyl rubber ,
Nitrile rubber - NBR
Eye protection: Safety eyewear complying with an approved standard should be
used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts.
Recommended: Tightly fitting safety goggles.
Skin protection: Personal protective equipment for the body should be selected
based on the task being performed and the risks involved and should
be approved by a specialist before handling this product.
Recommended: Wear protective clothing.
Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the
end of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Environmental exposure controls
Technical measures : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume
scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable level.
Stability and reactivity
Reactivity : No specific test data related to reactivity available for this product or its ingredients.
Chemical stability The product is stable.
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid : Avoid dust formation.
Incompatible materials : No specific data.
Chemical stability The product is stable.
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid : Avoid dust formation.
Incompatible materials : No specific data.
Disposal considerations
Waste treatment methods
Product
Methods of disposal: Examine possibilities for re-utilisation. Product residues and
uncleaned empty containers should be packaged, sealed, labelled,
and disposed of or recycled according to relevant national and local
regulations. Where large quantities are concerned, consult the
supplier. When uncleaned empty containers are passed on, the
recipient must be warned of any possible hazard that may be caused
by residues. For disposal within the EC, the appropriate code
according to the European Waste List (EWL) should be used. It is
among the tasks of the polluter to assign the waste to waste codes
specific to industrial sectors and processes according to the
European Waste List (EWL).
Hazardous waste :: Within the present knowledge of the supplier, this product is not
regarded as hazardous waste, as defined by EU Directive
91/689/EEC.
Packaging
Methods of disposal
The generation of waste should be avoided or minimised wherever
possible. Waste packaging should be recycled. Incineration or
landfill should only be considered when recycling is not feasible.
Special precautions: This material and its container must be disposed of in a safe way.
Empty containers or liners may retain some product residues. Avoid
dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
Product
Methods of disposal: Examine possibilities for re-utilisation. Product residues and
uncleaned empty containers should be packaged, sealed, labelled,
and disposed of or recycled according to relevant national and local
regulations. Where large quantities are concerned, consult the
supplier. When uncleaned empty containers are passed on, the
recipient must be warned of any possible hazard that may be caused
by residues. For disposal within the EC, the appropriate code
according to the European Waste List (EWL) should be used. It is
among the tasks of the polluter to assign the waste to waste codes
specific to industrial sectors and processes according to the
European Waste List (EWL).
Hazardous waste :: Within the present knowledge of the supplier, this product is not
regarded as hazardous waste, as defined by EU Directive
91/689/EEC.
Packaging
Methods of disposal
The generation of waste should be avoided or minimised wherever
possible. Waste packaging should be recycled. Incineration or
landfill should only be considered when recycling is not feasible.
Special precautions: This material and its container must be disposed of in a safe way.
Empty containers or liners may retain some product residues. Avoid
dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
