bis{4-[2-(prop-1-en-1-yl)phenoxy]phenyl}methanone

Guidance on Safe Use

First-aid measures

Description of necessary first-aid measures.

General information:

Pay attention to self-protection.

Remove victims from hazardous area.

Immediately remove soiled or soaked clothing and remove it to a safe distance.

Keep victim warm, in a stabilized position and covered.

Do not leave the victim unattended.

Place patients who are unconscious but breathing in the stabilized lateral position.

Inhalation:

Inhalation is possible if aerosols, mists, dusts, or smoke form.

Move to fresh air.

With labored breathing:

Provide with oxygen.

Consult a doctor immediately.

If the casualty is not breathing:

Perform mouth-to-mouth resuscitation, notify emergency physician immediately.

Skin Contact:

Wash off affected area immediately with plenty of water for at least 15 minutes.

Get medical attention if any discomfort continues.

Eye contact:

With eye held open, thoroughly rinse immediately with plenty of water for at least 10 minutes.

In case of persistent discomfort:

Consult an ophthalmologist.

Ingestion:

Rinse mouth.

Immediately give large quantities of water to drink.

Seek medical advice.

Personal Protection for First-aid Responders:

No data available.

Most important symptoms and effects, both acute and delayed.

Symptoms:

None known.

Hazards:

Other dangerous properties can not be excluded.

Indication of immediate medical attention and special treatment needed.

Treatment:

This substance has no remarkable acute health hazard potential.

Acute health damage is therefore not to be expected.

Fire-fighting measures

Extinguishing media.

Suitable extinguishing media:

-Water spray.

-foam.

-CO2.

-dry powder.

Unsuitable extinguishing media:

Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture:

May be released in case of fire: toxic gases/vapours.

Advice for firefighters.

Special fire fighting procedures:

Contaminated extinguishing water must be treated at a suitable disposal plant in accordance with waste management laws.

In case of fire, remove the endangered barrels and bring to a safe place, if this can be done safely.

Keep unauthorized personnel away.

Special protective equipment for fire-fighters: wear a self contained respiratory apparatus Full protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures.

For non-emergency personnel:

No data available.

For emergency responders:

No data available.

Environmental Precautions:

Observe regulations on prevention of water pollution (check, dam up, cover up).

Do not allow entrance in sewage water, soil, stretches of water, drainage systems, surface water.

If the product contaminates rivers and lakes or drains inform respective authorities.

Methods and material for containment and cleaning up:

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Disposal according to local authority regulations.

Handling and storage

Precautions for safe handling

Technical measures (e.g. Local and general ventilation):

Provide appropriate exhaust ventilation at machinery.

Provide for installation of emergency shower and eye bath.

Safe handling advice:

Refill and handle product only in closed system.

Provide sufficient ventilation and exhaust at the workplace.

Avoid residues of the product on the containers.

Handle in accordance with good industrial hygiene and safety practice.

The personal protective equipment used must meet the requirements of Regulation (EU) 2016/425 and amendments (CE certification).

It should be defined in the work place in the form of a risk analysis according to Regulation (EU) 2016/425 and amendments.

Contact avoidance measures:

No data available.

Conditions for safe storage, including any incompatibilities.

Safe storage conditions:

Keep away from combustion sources such as sparks, flames and unprotected light sources.

When using do not smoke.

Take precautionary measures against static charges, keep away from sources of ignition.

In order to ensure due transportation, make certain that stacks are of the correct height, containers are securely fastened so as not to fall off, and labelled according to the regulations.

Store in the original receptable, keeping this tightly sealed, under cool and dry conditions.

Safe packaging materials:

No data available.

Storage Class: 10: Combustible liquids.

Transport information

Land transport (UN RTDG/ADR/RID)

Shipping

Special provisions / remarks

Remarks:

Not regulated as a dangerous good

Inland waterway transport (UN RTDG/ADN(R))

Shipping

Special provisions / remarks

Remarks:

Not regulated as a dangerous good

Marine transport (UN RTDG/IMDG)

Shipping

Special provisions / remarks

Remarks:

Not regulated as a dangerous good

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Not regulated as a dangerous good

SpecialProvisions

Exposure controls / personal protection

Exposure controls.

Appropriate Engineering Controls:

Provide appropriate exhaust ventilation at machinery.

Provide for installation of emergency shower and eye bath.

Individual protection measures, such as personal protective equipment.

Eye/face protection:

Safety glasses with side-shields conforming to EN166 Accidental release measures close-fitting protective goggles (e.g. closed goggles).

Hand Protection:

Material: Nitrile.

Glove thickness: 0.2 mm

Guideline: DIN EN 374

Additional Information:

Applies to handling for brief periods or of small amounts.

Material: Nitrile/Chloroprene

Glove thickness: 0.65 mm

Guideline: DIN EN 374

Additional Information:

Applies to handling for longer periods or of large amounts.

Additional Information:

Selection of protective gloves to meet the requirements of specific workplaces.

The suitability for a specific workplace should be discussed with the producers of the protective gloves.

The information is based on our own tests, references from the literature and information from glove manufacturers, or derived by analogy with similar materials.

Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).

Skin and Body Protection:

Select materials and equipment for physical protection depending on the concentration and volume of hazardous substances and the workplace involved.

Respiratory Protection:

Should vapours inadvertently manage to permeate into the surrounding air during thermal processing, then gas masks fitted with filters designed to combat organic vapours (e.g. A 2) or breathing apparatus with an independent air supply are to be worn.

Hygiene measures:

Take off immediately all contaminated clothing.

Handle in accordance with good industrial hygiene and safety practice.

No eating, drinking, smoking, or snuffing tobacco at work.

Wash hands before breaks and immediately after handling the product.

Keep away from food and drink.

Stability and reactivity

Reactivity:

No data available.

Chemical Stability:

No data available.

Possibility of hazardous reactions:

No dangerous reaction known under conditions of normal use.

No special precautions.

Conditions to avoid:

No decomposition if used as directed.

Take precautionary measures against static discharges.

Avoid shock and friction.

Incompatible Materials:

No further information available.

Hazardous Decomposition Products:

No hazardous decomposition products are known.

Disposal considerations

Waste treatment methods.

General information:

No data available.

Disposal methods:

No data available.

Contaminated Packaging:

Do not reuse empty containers and dispose of in accordance with the regulations issued by the appropriate local authorities.